My new one, I watch will activate not more

Similar Questions

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• 9.3 IOS downloaded to my ipad. but the ipad will activate not guard telling me that the activation server is temporarily unavailable

  9.3 IOS downloaded to my ipad, but it will not activate. I get the server is temporarily unavailable. Try again

  Just be patient. Millions of users are trying to update the devices at present. It's just the matter when you click the server. Try again a few hours later.

• New version of Firefox will otherwise not internet due to 'proxy server '?

  I tried two times to update my firefox to the most recent (as of 07/18/10). When I did, I was unable to get anywhere on the internet. The message said the proxy of my server settings would not allow it and to make changes. I use a personal computer with Windows 2000. It connects directly to the DSL, there is no server in my house. I'm not too computer savvy but tried to use info tools but that just assume that I already know about the servers proxy, servers, etc.. I could remove the new version and load an old one stored on my computer and have no problem getting on the net. What is the solution that I can do? Should what steps I take. I'm not going to hire a guy to do what should be a simple task.

  Tools > Options > advanced > network > settings, set your connection on 'No proxy', if you are not using a proxy.

  «Firefox 3.6.6 added a new preference that sign of connection settings, proxy use "system settings", and the default value is the point.» This new pref does not affect most users, because they probably do not have a proxy set in place in their operating system.

• In Windows Defender, remove them, disable and enable buttons will activate not when I try to use them to manage the start up programs.

  I'm looking to speed up startup of Windows Vista.  I had used Windows Defender to disable startup programs.  It worked as described.  This time, delete, disable it and enable buttons would not activate or turn on when I chose a program to turn off.  Any suggestions?

  Defender is probably not necessary with McAfee...

  Both offer a real - time sweep and may potentially conflict with each other.

  You should never have more than one security product installed on the PC, providing active protection / scan. This can cause performance problems, system instability and conflicts between programs and can affect all installed antivirus product efficiency.

  Vista is historically a slow start... I have improved the startup of my Vista laptop with a reinstallation of the operating system, without installation of I-tunes (the computer was used by my daughter-in-law) and I added 1 GB of RAM.  It starts very well now.

  McAfee is known to adversely affect the performance of the computer - I him have not used for many years.  The last time that I removed McAfee from a slow computer, that it was like the addition of several gigabytes of RAM to view was an immediate performance improvement.  If your computer has a good processor (preferably bicoeur) and several GB of RAM must be able to run Vista (and McAfee) however.

  Good luck...

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

• case # 1178354456. Complete Windows is no longer install new programs. IE will remain not connected

  Windows Installer does not work.  programs (program of the printer) will not be installed.  That is to say wii not stay connected.  This uprade last saince for windows vista

  Hello JoeB66,

  You receive error messages when you try to install programs?

  Have you tried to install in compatibility mode printing software?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility?SignedIn=1

  For your internet connection problems, I recommend you to look at this article and try the troubleshooting is:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• New installation of Windows will be not updated

  I installed a free version of Windows 7 64 bit on a new generation of computer. Activation went through successfully.

  The problem is that I can't run any programs that need to use internet to get updates. This includes Windows Update, anti virus, or games. I can't even download and run Windows IT. difficulty strange thing is I can surf the internet without any problem.

  Windows Update gives me error codes 80244015 and 8024400 a.

  Any help would be greatly appreciated.

  This is an old question, but it should work

  If looking for updates to hang on a current installation,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  You can try and install the latest client update manually let your update settings to never check for updates until you install it.

  https://support.Microsoft.com/en-us/KB/3138612

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• Re: After recovering from a tag on the viruses, automatic updates will activate not return

  I downloaded a game and a virus that uses a Tag Logo as he called Microsoft XP Security 2012. I kept popping up telling me to register because my computer has been infected with various viruses, worms and Trojans. Whenever I try to use Internet Explorer it would come saying that the web browser was corrupted and infected. To remove this tag along virus I had to use Google Chrome to access the Microsoft Download Center to get the tool to remove malware for July, which took 12 hours to analyze to find a virus! After a San with MSSecurity, a Volume control and the drive clean, my computer was back to normal except for not being able to turn on the automatic updates or go beyond the home page in Microsoft Updates. I love and need for security, software and hardware updates as I'm connected with four other computers for my small home bussiness. If there is a response to ther, please report it! Just don't let it lead to confusion as rebooted form control pane (?) and restart again in him pane (?) control.

  Tony,

  A general solution, * IF * it isn't malware issue, would be to reset the update components:

  (When was the last time you checked your system for malicious programs?)

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  Go to the next article via Internet Explorer (only) & run the fix it 50202 mode by DEFAULT and AGGRESSIVE.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058>

  02:08:5307/21/11

• Am curious to know why XP Pro crashed and reinstall the will does not activate

  Have a system that ran XP Pro for a couple of years without problem. Software and license (product key) was purchased online, downloaded and burned to CD. Once installed, OS signals like SP3 XP Pro Version 2002. First installation and activation years was fine. Reinstalling/reactivating later a year later due to a failure of the drive was fine. System had presented a Genuine Advantage test and been patched now with no problems. Last week we had errors saying the OS was not authentic and we could be a victim of a counterfeit. System crashed and when restarting it gets to the login screen, but if the connection is attempted the desktop and in a minute or 2 the system restarts and goes in a loop of reboot, never load the new OS. Start in safe mode gets through the initial steps, but after the start of files loading the system restarts and loops. No configuration of the software/hardware/don't change in recent months and no unusual entry in case do not connect up to 2 days before the accident. No indication of hardware problem and no cases of virus or malware of MS Security Essentials. I tried repair OS, no help. Now have wiped the hard drive and tried to reinstall the operating system (computer, no change) and it will reinstall correctly by using the original product key, but will not activate. Reports as not a valid product key. Activation of the phone I tried and it will activate not there either; reports as invalid product. Considered we could have actually gotten pirated OS, but I'm puzzled why, if the software was fake, the system would work very well for if long including product activation earlier and passes test Genuine Advantage, then suddenly crash, cause errors 'potential infringement' and do not allow for reactivation. Thought at some point, the system has had virus/malware issue, but this does not explain why the relocation after the failure of the drive fails to activate. System critical to the needs of companies and has been replaced so no urgency to correct but I'm very curious to know what might happen. Comments or suggestions would be welcome. Thank you!!

  I checked the key used, and here's the information that my tool tells me about the key:
  (1) version of Windows XP Pro MSDN
  (2) is blocked Activation (reason: abuse)
  (3) no Validation blocked
  (4) shows no sign that it is a basic time license (TBL)
  (5) 31 attempts to activation
  (6) 17 total Activations
  (7) first activation on 2010-08-03
  (7) last Activation successful 13/04/2010
  (8) date of the first activation has been blocked 13/01/2011 (note: this is not necessarily the day, the block has been applied, just the first attempt of activation which is refused due to the block)

  It is d ' attribute of strangeness between this key and "information" which include the Genuine Advantage you said.

  First of all, it's a MSDN license which means that someone can not use the key unless you have an MSDN subscription.

  Then, the key is blocked but not blocked Activation Validation.  It's unusual because usually, if an MSDN key is proved have been hacked (sold outside it's allowed) would be blocked the key activation and Validation.

  In this particular case, it seems that the key has been blocked because of too many activations Activation (on computers with different hardware ID, which usually means different computers) in a short period of time.

  As for the key being a limited time license, which makes no sense.
  (1) I don't see that a MSDN key would be time limited.
  (2) if the key has been blocked due to it having expired, then the reason for the block would be expired are not abusing.
  (3) the key was first activated in March 2010 and the person you talked to said that the key expired a week (i.e. 2011) there. Limited time Licenses are generally used to try before you buy things and I don't know any license based on the time that a period of over one year (16 months to be exact).

  I am convinced that the person that you talked to was wrong that this key was a limited time license.

  My assessment of the information I have available suggests that the key was actually blocked in 2010 due to excessive activation in a short period of time.  I say this because, shows the history of activation:
  (1) first activation in 08/03/2010
  (2) last activation successful 13/04/2010
  (3) 17 total Activations

  This shows that the key has been used 17 times, on 16 different computers, in a little over a period of a month. This does not seem excessive. and strongly suggests that the key has been blocked for this reason, in April 2010. You just didn't notice the block until the end of 2011.

  However, even if the current issue was caused probably by a number excessive activations (which can be fixed by asking that the key be unlocked) the real problem comes from the fact that the key is a licensed MSDN.  The permits required that any key from an MSDN subscription (what to do with all the MSDN keys) can be used by the owner of the MSDN subscription. If you do not have the MSDN subscription that come from this key, you are not allowed to use this key.

  Thank you
  Darin

• Replacement 7 HP (OEM) Windows 7 Professional (OEM) in my first build and want to reinstall Windows 7 HP in new construction. I will be able to activate it?

  I know that usually an OEM will activate not in another computer, but surely there would be some kind of exception in this particular case.  I will definitely buy another Windows 7 software to accommodate a second generation, but I want it to be a professional OEM.  Then, I would remove the HP 7 which is in my primary building and replace it with the professional 7.  I would setup when the second generation using the disc for HP 7.  Prior to this game plan and 7 professionals buying, I would like to be sure that I can activate successfully relocated 7 HP.

  This will not work because of licensing restrictions.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  You need a full commercial version.

• RAW (NEF) of my new Nikon D750 photos will be open with Photoshop Camera RAW Elements11.

  RAW (NEF) of my new Nikon D750 photos will be not open flush with the camera with Photoshop elements 11. This was not a problem with the previous Nikon cameras. I use a MacBook Pro with OS X 10.9.5. How can I solve this problem?  Thank you.

  Apart from the pse 13 upgrade, you can use the 8.7.1 dng converter from adobe to convert best dng files, PES 11 should then open.

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 8.7.1

  How to use

  Camera Raw: How to use Adobe DNG Converter - YouTube

• I bought adobe cc of my student account and installed. Then my computer broke down and I bought a new one. Do not know how to install cc on the new computer. The redemption code can be used and the web campus will not make another p

  I bought adobe cc of my student account and installed. Then my computer broke down and I bought a new one. Do not know how to install cc on the new computer. The redemption code cannot be used and the campus web allow me to make another payment within 1 year in term aid.

  I'll appreciate any help!

  The Adobe ID here in the forums have no CC registered to it, you can activate the CC to your Adobe ID twice. in case you have activated it twice, you have to disable among the previous machine or the third machine will give you the ability to disable from all the previous machine.

  Concerning

  Baudier

• chip Watch 2 new one does not

  Hi friends I purchaged smart watch 2 yesterday, when I was doing unbox 0% load.

  I let charge for a few hours my SW2 and it keeps restarting and it displays a number on the corner of the screen: 172411.after this mobile and watch linking symble... If I try to connect to a computer the operating system does not recognize the device and also guard reboot over and over until I unplug the USB cable. That's why Sony PC Companion does not recognize it either. Please help me...

  I'm listening and I try to help - when you see the watch and phone linking photo you have a cross and a tick - if yes try the Ribbon of the cross, then I hope that your watch will begin and leave allows you to perform a system to reset or on your phone, open bluetooth and analyze new devices and select the watch and it must match and then your phone will direct you to the correct applications to install

• my old motherboard was brockin so I replaced it with a new one and now I carnt activate windows pleae help

  my old motherboard was brockin so I replaced it with a new one and now I carnt activate windows pleae help

  Something that all OEM computer owners need to understand...

  Citing the example of a desktop HP ENVY h8-1419 PC...

  It is the motherboard that determines the make and model of a PC OEM, NOT the case.

  OEM motherboards contain BIOS custom, in this case HP. Installing OEM key code and recovery disks or partitions will work as long as the Windows installation find a BIOS from HP and the type of motherboard, Windows will validate and remain active.

  When replacing the motherboard, for some reason, with a motherboard that does NOT have a custom BIOS HP, the computer is no longer a desktop HP ENVY h8-1419 PC.

  If the 'new' motherboard first saw life in a DELL computer, it then becomes a DELL. It is not possible to use custom installation of another brand of OEM OEM.

  If she started life in a box of motherboard manufacturer on the set of a major computer parts retailer, is no longer a desktop HP ENVY h8-1419 PC. It's everything that appears as the make and model in the box...

  In the first case, you will need the COA, the key code sticker and the DELL machine DELL of origin if original installation media you want together upwards, the drivers and all.

  Or, as in the second case, you will need either a retail key code or a code key of system manufacturer which must be purchased.

• Apple Watch will not unlock MacBook

  I have a Macbook 2016 on MacOS, iPhone 6 more current iOS10 of execution, first-generation Apple Watch running Watch OS3 and two steps on authentication.  As shown in the screenshot below, I was able to check the possibility of allowing my Apple Watch unlock my Mac.  He looked the watch and then checked.  I did this several times, however, it will not unlock the Mac.  New features to copy and paste between devices, etc seem to work well, but I can't get the unlocking function to work.

  

  Hello wow321,

  Thanks for asking for help with unlocking you Macbook with your Apple Watch here in Apple Support communities. We commend you for updates latest and your devices. Also, please check the things you already checked. I will do my best help to offer things to get this working as expected.

  I have personally reviewed article for help to unlock your Mac with your Apple Watch which is here: automatically unlock your Mac with your Apple Watch. The first thing we want to do is to check that everything is correctly configured through this step by step article once more.

  A confusing area for some people is the type of security on their Apple ID. The State of necessity who need a Apple ID to use instead of the two-step verification two factor authentication. Please check the type of security on your Apple ID using this help article that deals with two factor authentication: authentication two factor for Apple IDand this second article of help dealing with two-step verification: frequently asked questions about two steps checking of Apple ID.

  If any snippet and you still have questions, I recommend you make a backup of all your data on your iPhone to make sure that everything is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Then, try to turn the iPhone, with the Apple Watch is paired both devices Mac, power off and on. Sometimes, that's all that is needed for connections reset and everything working properly again.

  If you're still having problems, please cancel the twinning of your Apple Watch from your iPhone by following the steps described here: pairing your Apple Watch and iPhone. Reset the network settings on your iPhone under settings > general > reset > reset network settings. This will remove not your personal information (contacts, photos, calendar of events, etc.), but it will remove networks WiFi recorded and passwords, as well as all the APN or previously used VPN settings and Bluetooth devices connected. After the reset of the iPhone, pair your Apple Watch with your iPhone again and check if the Apple Watch can then unlock your Mac.

  Thanks again for asking for help with this here in Apple Support communities. Have a great rest of your day.