My NEW Sansa Clip 8 GB jump audio during playback

Similar Questions

• New Sansa Clip + turns off after a few minutes of play audiobook...

  Hello

  I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer, and audio tracks are in the player very well.  When I start the audio book, the player will stop after about three minutes of play.  I need to do a soft reset before it turns on again.  This happens whenever I try to read the audio book.  I have not loaded all of the songs on the player at the moment and I was wondering if this problem was something I got wrong, or if I was just a faulty drive.  This is my first mp3 player, so I'm new to this. :-)  The radio and the pre-loaded songs work fine.  I contacted the customer service, but have had no response.  Thought I would try the forum before you give them a call.

  I hope someone can help,

  El

  You must use a ripping software and extract the mp3 or wma files. The Clip + probably does not even support .wav files.

• Headphone Jack does not fit into my new Sansa Clip +.

  Hello

  I just bought a new Sansa Clip + so I could listen to my songs while he's on vacation, but when I put in my profile 3.5 headphone jack into the hole on the side of the mp3 player, it will not thoroughly and grave if I don't hold him properly. That is how a Sansa Clip + is? because I found it very boring.

  I hope someone can answer quickly because I'll be on vacation in a week about. And sorry for my English because it is not my mother tongue.

  When the player is again taking is very tight and it takes a little force to get the plug completely.

• New Sansa Clip + not showing the track titles

  I recently got a new Sansa Clip + as a Christmas gift to replace my old (his helmet came out). I've updated to the latest firmware (even my old 01.02.18A,), and I copied my entire library of music from the old to the new player. Everything plays and works in the same way, except for one thing: on the new drive, the song titles never see the place, and the name of the file is always displayed during playback of a song. My old player would show the title of the song of the metadata instead of the file name during playback if it was available. I checked that the titles are actually there and were not lost through some freak mishap copy, so I'm puzzled as to why it won't work as my old drive.

  Anyone know of the issue and how to fix it?

  Well, Yes, that is my point of view. All tags are there, and all the rest (album, artist, etc.) is displayed in the main screen of the reading and the news section of track except for the title (who, oddly, has never had a track in any case information entry, but that is not the issue).

  ... well that, as strange as it may seem, the titles of the tracks seem to have returned - after, I moved music off the device to analyze the data volume to activate the Clip + Replay Gain. Really weird, but hey, it works now! (Maybe switch to the computer did it, since I initially copied it directly between devices?)

• New Sansa Clip + turns, but in a foreign language

  New Sansa Clip + never gave me the possibility to choose the region or language. Later, I tried to manually "Reinstall" the latest version firmware to restart, but following the instructions resulted in no improvement. Any suggestions?

  Thank you! It worked, so I'm on the road to recovery. I didn't argue with Amazon to return the thing. I had an older Clip which lasted many years and never gave me any problems, so I was concerned when this new one did not work properly out of the box.

• new sansa clip more 8 GB not detected but charge

  I got a sansa clip more 8 GB as a gift. new but old stock. everything works fine. except this is not detected by the pc. It will load.  I installed the drive, but I think that it isn't installed rhapsody. can I completely ignore the part of the Rhapsody? total newbie to mp3 sansa. I'm using windows media player 11, vista ultimate 64-bit version

  Miikerman wrote:
  As ends in General, no matter what Generic USB cable with straight plug should be fine with your drive. My hunch is that there may be some problems with the USB cable you have tried (something that you might want to check, by the way). Sometimes I use the USB cable that came with my Clips, sometimes I use one of my many generic not cheap-o cables; six of one and half a dozen of others - they all work very well.

  There is there the cables that don't transfer data, only the fee...

• His jerky in Windows 7 and Realtek audio during playback of music - after the release of sleep

  Hello

  Lately I'm encounter problems playing music on my desktop PC and my house. My desktop PC is x 64 bit my home PC is x 86. What they have in common is a NVidia card (7300 on my PC at home while 9600 on my desktop PC) and MoBo integrated Realtek Sound Chip. The systems are up-to-date, the drivers are updated via the automatic updates. When I feel his jerky, I reboot the comptuer (s) and its good to happen for a few hours. I have no idea which can be triggered to become again a bit rough sound. Sound is at once during playback of movies using Windows Media Center (on my house cause of PC I don't watch movies at work lol: D), when you listen to music using media player or Winamp. Even when I'm not touching the PC so there's no great animation on the screen. If I turn off improvements in the sound Control Panel Applet, the sound is not so rough but will not solve this problem completely.

  Software that both computers have in common:

  • TeamViewer, Mikogo
  • Skype, Yahoo Messenger, Windows Live Messenger (rarely signed), Google Talk (still signed to)
  • NCP Secure entry Client (using actively at work, I already uninstall-ed on my PC at home, the sound still jerky)
  • VMWare Server ActiveX control installed through IE (already using actively at work, uninstall-ed at home, always choppy sound)
  • Last.FM, Windows Media Player, Winamp, VLC, Miro
  • Wuala
  • uTorrent
  • Daemon Tools
  • RDTabs
  • Picasa
  • FFDShow
  • 7-zip
  • SmartDefrag
  • Office 2007
  • Visual Studio 2008, SQL Server management tools
  • SpeedFan, HWInfo32

  Suggestions to better diagnose the problem? It's kindda boring.

  Thank you
  Levi

  For those who have this problem and want to see if this resolves for you too: Click on your start ORB, type "services", press on enter, find and restart the "Microsoft Antimalware Service.  Turn on real-time protection if it is always disabled and performed before.  Check your sound, and it should be fixed!

  Vincent,

  I thank very you much for the suggestions!  Finally, some useful tips!

  I used FADS latency Checker and received peaks of 27,000 when he started to be choppy, 50 000 when it was quite rough, and really bad it had reached its maximum about 75 000 - 80, 000.

  When not jump and everything seems fine, as after a restart, the spike is not even go above 500 (if so, rarely and much higher).

  I know that material resources was not my prescription, as I am running out of 8 logical cores of 3 GHz and have 6 GB memory triple channel high speed of at least 50% most of the time.  When the bad audio dropouts are produced, I confirmed this (0-3% cpu usage) and 3 + GB available physical memory, even with my page file off to improve performance.

  While the auditor of latency DCP everything was in the Red (high values), I started through my services running and restarts, one by one.  Then I got to 'Base filtering engine', which has a description of: "the filter Base (BFE) engine is a service that manages firewall and Internet Protocol (IP, IPsec) security policies and implements user mode filtering. Stopping or disabling the BFE service will significantly reduce the security of the system. It will also result in unpredictable behavior in IPsec management and firewall applications. "I proceeded to try to restart, which pops up a message saying that 3 other services will also have to restart to restart: IPsec Policy Agent, the Windows Firewall and Microsoft Malware Protection network pilot.  I clicked 'Yes' to restart all of them, and after a few seconds, windows tells me "Windows could not stop the engine service of filtering based on Local computer.  Error 1051: a stop command was sent to a service that depend on other services running on. "If I click Ok and I look in the STC audit program and my latencies are all still red way and reading too high.  At this point, the windows firewall is disabled, all other 3 services work well.  So I try to restart again, and he succeeds.  Instantly, my auditor DCP is back green and low numbers (<500) and="" all="" audio="" skipping="" has=""> I still don't know what Department it is, because it could be these 3):

  1. the base filtering engine of
  2. IPsec policy agent
  3 Microsoft Malware Protection network driver

  Update:   Now that my sound was turned off again, I have to debug more, but I can't even see the third listed throughout the services, either on or off the coast, but restart the Policy Agent IPsec has nothing.  I restarted Microsoft Antimalware Service since he was the only one that sounded related to #3 above, and that did the trick, DCP levels and without legs instantly fell more.  I always do the same thing every two days or so, or sometimes once a day (depending on how much I use my audio...? maybe?)

  So, does make sense that this service could cause problems?  This means that it is not a driver - correct problem?  If this isn't a Realtek driver problem then it is matter of microsoft and will be fixed - this is their service and software that appear to be the cause of the issue / conflict with the driver.  I guess it could be either a problem, but the realtek and microsoft can fix it if they want to!  It would be nice not having to do now almost every day just to use the sound

  Thanks again Vincent!

• Move to the new computer, get "an error has occurred during playback of files or write files to a disk." The disc

  • I tried to move my catalog and PE6 install to a new computer.  This is on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64-bit) machine.  I always kept my photo on an external hard drive files.  My library is 50 GB, 10,000 files.  Here's what I did.
    • Copied the original PE6 installation file on the Toshiba.  Installed but not activate it.
    • Copied my catalog folder to the location of the Windows 7.
    • Plug the external drive into the Toshiba.  So makes that same letter drive as a front.
    • Fired up to PE6 on Toshiba.  Seemed fine in the Organizer.  Everything seemed to be there, but I didn't try to make any changes at this time there.
    • PE6 disabled on the Dell.  Enabled on the Toshiba.
  • Then I realized that it is not fair.  I can edit the keywords and the stars rating on photos, but not the dates, legends or notes.  I get "an error has occurred during playback of files or write files to a disk." The drive is may be full, or there may be problems with the source media. »
  • Only a fraction of the external drive is in use.
  • I can access the files on the external hard drive with another application (Windows Photo Viewer).
  • I tried the reconnect All missing files.  Somewhat ambiguous, she said "There are no files to reconnect."
  • In the properties in the organizer for each photo are the appropriate file names and paths.  Folder view works fine in the Organizer.
  • I can put new files in the directories of the same external drive, import them into PE6, then change them normally.

  What is the best way to get Organizer connected correctly to my files?  I guess I could import all photos on the new machine, but I guess I'd lose some of my metadata.  So it's out of the question.

  Thank you

  Bill

  Well, the recommended method for moving the catalog is to use organizer of the PSE6 on your old computer to do a full backup on your DHM.  (Which backs up the catalog and media files).  Then, on your new computer, open the Organizer PSE6 and restore from this backup.

  Your method seems logical, but...

  Ken

• Ruined my new Sansa Clip +?

  I know, I wasn't supposed to disconnect the drive before you eject the computer. But when the old computer of Windows XP does not recognize, I thought it was the only thing I could do.

  Now, the player is stuck on a screen that says 'unknown' and I can't get any of the buttons to work. It is not yet closed.

  My new mp3 player is completely destroyed?

  Try a "soft reset". Press and hold the power button for about 20 seconds.

• New Sansa Clip + - no Menu?

  When I took this out of the box, it has been almost completely reloaded. Let it charge a bit anyway. He plays the songs that comes with it, but I thought I'd see what song was playing? I can't access the menu - I press the button for it, but nothing happens. All I see is helmet and the word music. I can't nothing or see something else. It's a lemon, or am I missing something? I haven't used the CD that came with it, I guess it was just to use Rhapsody, that I don't use it.

  Thank you

  Sandy

  Remove protection sticker

• Unable to hear the audio during playback of videos in youtube, etc.

  The sound worked perfectly until a few days ago. I hear the sounds

  the computer is supposed to make (bumps, etc) if I put an audio CD,.

  This works. I can not all the sounds from the internet, not youtube etc.

  The Control Panel indicates that everything is working, (sigma such high definition audio).

  Original title: the sound work on my computer, he can play external audio CD, but I get no sound on the internet like youtube or videos etc.

  Hello

   
   
  1. what happens when you try to play videos from YouTube?
  
  2. do you receive any error messages?
  
  3. have you checked the question in another browser? You use Internet Explorer as your default browser?
  
  4. are you able to play videos using Internet Explorer?
   
   
  If you are using Internet Explorer, perform the following steps:
   
   
  Method 1:

  
  If you use Internet Explorer, make sure that the settings below are correct.

  (a) Open Internet Explorer.
  
  (b) go to Tools>Internet Options.
  (c) switch to the tab 'Advanced'.
  (d) scroll down to the 'multimedia' heading
  (e) make sure that "play sounds in web pages" is checked. Click on 'ok'.
  Restart Internet Explorer. A test to see if you can hear sounds online.
   
   
  Method 2:
  
  a. open Internet Explorer .
  
  b. click on the volume icon in the status bar (at the lower right corner of the desktop) windows system and then click on the link titled 'Mixer'.
  c. a Panel opens showing the levels of individual volume of applications running that play sounds (you may need to scroll right to see all of them).
  d. ensure that the level of volume belonging to Internet Explorer is not set to mute.
  Please let us know if this solves the problem.
  See also:
  
  Diagnose and automatically repair audio playback problems
  http://support.Microsoft.com/mats/NO_SOUND/
   
   
   
  I hope this helps!

• No video only audio during playback of movie with Windows Media Player

  I downloaded a movie, however it only plays the sound as if I announce myself to music what's wrong?

  Windows Media Player

  Hi Wolves1693,

  Have a. you tried to play the movie with a different actor?

  B. What is the format of the video file?

  C. do you have video when you play other movies or songs?

  D. What is the size of the file?

  Try these steps in the meantime.

  Step 1

  Try to update the codec and check the status.

  Install or update a codec:
  http://www.Microsoft.com/windows/windowsmedia/player/FAQ/codec.mspx#q14_3

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  If the problem persists then try step 2.
  
  Step 2

  Try to reduce hardware acceleration, then play the video.

  1 open the screen resolution by clicking on the Start button, click Control Panel, and then under appearance and personalization, click adjust screen resolution.

  2. click on Advanced settings.

  3. click on the tab Troubleshooting , and then click change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. move the Hardware Acceleration slider down.

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  I hope this helps.

  Please answer in return.

  Bindu S - Microsoft Support

• What size an iMovie project maybe? Quality audio during playback

  Need big-time help from some pros iMovie 11 out there. I would like to have a more recent machine on which I could use the latest version.

  I am re-a one hour film editing, that I made for the anniversary of this year 25 years ago, and I'm afraid of project file may be too large. I have lots of sound effects and music added added that begin to abandon during reproduction, which wasn't a problem for weeks, so the project was smaller. I think pretty well I can't get all on a DVD, so I will break the film into two parts, I should have an intermission still. What can I / should I duplicate the event or project, or both and delete the last half of the movie from the original project / event and then delete the first half of the film of the copy (assuming that I can copy of in iMovie)? If possible, I think two small-sized projects would be better than a big project and event. I do not know if I must and can copy an event, since the same source files would be shared by the two smaller projects. Sorry to ramble on, but I need an intervention of paranoia here. p.s., if I connect an external USB drive to back up my iMovie project, should I just copy the files to iMovie in my users-movie file, or is there another way? Thank you, Carl.

  HI, Carlat,

  Share the lack of space on your hard drive or an external drive, there is no limit on the size an iMovie project can be.  If you have a slow computer, you may have some difficulties with it now with your editing, and there may be some stuttering or abandonment you observe.

  Your computer may not be fast enough to playback in iMovie to deal with the drafting of a major project.   Probably it's just a problem of reading and shared final project on will play well.  If the abandonment issue bothers you, your idea of dividing two projects while you work on it is good.   You can join the two projects together when you're ready to share it.  (You can take a video of 2 hours on a standard DVD disc, this project of 1 hour adapt you very well if you want to keep onto a single disc.)  As you mentioned, don't forget to save or duplicate your original project before starting it a re-release and then work on the copy.   That way if something is wrong you still have your original intact.

  I'm not as familiar with Mi9 I am with the current iM10.1.2 version, so I will let others answer additional questions.

  Have fun

  -Rich

• Clicking or stutter during playback of the audio file on Sansa Clip

  I'm having a problem similar to that described in the following thread:

  http://forums.SanDisk.com/Sansa/board/message?board.ID=sansafuse&message.ID=2785&query.ID=219379#M2785

  Only I have the problem on a 4 GB Sansa Clip.

  The audio file is a DRM WMA to NetLibrary, 165MB, 32 Kbps and 11:48:01 in length.

  I am currently at 05:21 mark in the file and the stuttering arrived at a point where it is difficult to listen to the file.

  I had filled the files of devices (especially the music, a few podcasts) and then deleted, filled again, etc., so there may be some fragmentation that is either the problem.

  I'm reformatting of the clip using the internal format of the device function and allows you to copy only the audio book on the device at the beginning to see if the problem goes away (this * should * minimise, if not eliminate the fragmentation).  Then I resync the rest of the music files to the player using Windows Media Player, and then see if the problem comes back.

  I'll post my results here.

  Reformat the device worked very well.  The audio file sounds fine and the file is read immediately when you rewind or fast forward through the file (before it should pause a few seconds once you wanted to before play).

• SanDisk Sansa Clip + 4 GB MP3 player with FM Radio

  Hello-

  My new sansa clip + out of the box and I'm not able to do Radio FM works.  Battery is charged.  All I get on screen is a set of headphones and the 'music '.  I do not expect to play music because I have not yet loaded, but I expect to be able to get FM radio but can't seem to get there.  Any suggestions on how I have to happen?  Thank you.

  Please note that I do not see a menu of items to select from the MP3 player.  I do not see a "lock" or "unlock".

  My computer recognizes the drive as a new piece of hardware.

  The reader does not recognize the software on the CD when I put the CD in the computer.

  The player does not allow me to make the software what I t hink is the "root directory" for the player.  I guess tha the directory "root" is the "Sansa Clip + 4 GB" or the "internal memory".  It allows me to copy in one of these.   Appears as:

  + The Sansa Clip + 4 GB

  -Internal memory

  + Albums

  + Audio books

  + Music

  + Playlists

  + Podcasts

  + Records

  + Service

  My D drive that reads the CD has these files it contains:

  Autorun.inf and sansa - install .exe and one other file that reads:

  fscommand with these files it contains: dloadrhap.exe, dloadrhap.txt, proxy.bat, proxy.exe

  If I do not have need of these, please let me know.  I don't want to stuff more then I need to run the player.

  I'm assuming that I need only the files autorun.inf and the sansa - install .exe.

  I do not understand what is Rhapsody or why I need.

  Thank you.

  Bonnie

  Now, don't laugh at this suggestion, but: when you get the player, there is a transparent plastic sticker that was placed on the screen of the player, which has a screen simulation showing the items that describe you see on your screen - have - you, you take off the sticker? (It generally is a small tab on the right side of the tile to help with that.) Once you do this, the player I hope will begin to operate as expected. On the CD, you don't need at all! The CD is required to use the separate music Rhapsody and optional subscription service (for which you pay every month, after a free trial, usually). If you do not want the service, go to the CD. Finally, you should check and see if your drive is the latest firmware - look under settings to the player and to compare this version number firmware recent listed in the upgrade thread Firmnware sticky at the top of this forum. If the thread here has a more recent version of firrmware, recommended that you upgrade to it-, it is very easy to do. I hope this helps!