new sansa clip more 8 GB not detected but charge

Similar Questions

• Headphone Jack does not fit into my new Sansa Clip +.

  Hello

  I just bought a new Sansa Clip + so I could listen to my songs while he's on vacation, but when I put in my profile 3.5 headphone jack into the hole on the side of the mp3 player, it will not thoroughly and grave if I don't hold him properly. That is how a Sansa Clip + is? because I found it very boring.

  I hope someone can answer quickly because I'll be on vacation in a week about. And sorry for my English because it is not my mother tongue.

  When the player is again taking is very tight and it takes a little force to get the plug completely.

• New Sansa Clip + not showing the track titles

  I recently got a new Sansa Clip + as a Christmas gift to replace my old (his helmet came out). I've updated to the latest firmware (even my old 01.02.18A,), and I copied my entire library of music from the old to the new player. Everything plays and works in the same way, except for one thing: on the new drive, the song titles never see the place, and the name of the file is always displayed during playback of a song. My old player would show the title of the song of the metadata instead of the file name during playback if it was available. I checked that the titles are actually there and were not lost through some freak mishap copy, so I'm puzzled as to why it won't work as my old drive.

  Anyone know of the issue and how to fix it?

  Well, Yes, that is my point of view. All tags are there, and all the rest (album, artist, etc.) is displayed in the main screen of the reading and the news section of track except for the title (who, oddly, has never had a track in any case information entry, but that is not the issue).

  ... well that, as strange as it may seem, the titles of the tracks seem to have returned - after, I moved music off the device to analyze the data volume to activate the Clip + Replay Gain. Really weird, but hey, it works now! (Maybe switch to the computer did it, since I initially copied it directly between devices?)

• New Sansa Clip + turns off after a few minutes of play audiobook...

  Hello

  I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer, and audio tracks are in the player very well.  When I start the audio book, the player will stop after about three minutes of play.  I need to do a soft reset before it turns on again.  This happens whenever I try to read the audio book.  I have not loaded all of the songs on the player at the moment and I was wondering if this problem was something I got wrong, or if I was just a faulty drive.  This is my first mp3 player, so I'm new to this. :-)  The radio and the pre-loaded songs work fine.  I contacted the customer service, but have had no response.  Thought I would try the forum before you give them a call.

  I hope someone can help,

  El

  You must use a ripping software and extract the mp3 or wma files. The Clip + probably does not even support .wav files.

• New Sansa Clip + turns, but in a foreign language

  New Sansa Clip + never gave me the possibility to choose the region or language. Later, I tried to manually "Reinstall" the latest version firmware to restart, but following the instructions resulted in no improvement. Any suggestions?

  Thank you! It worked, so I'm on the road to recovery. I didn't argue with Amazon to return the thing. I had an older Clip which lasted many years and never gave me any problems, so I was concerned when this new one did not work properly out of the box.

• My NEW Sansa Clip 8 GB jump audio during playback

  Hi all!

  Yesterday, I bought a new Sansa Clip 8 GB with FM Radio and today I try. Well, some fat is a problem: my Sansa skips audio while playing songs, as happens when a scratched audio cd is reproduced (do understand you?).

  Initially, happened after one minute of play (on all the songs) but now it happens early on and listening is impossible.

  I don't understand what the problem is. The Sansa is NEW.

  Firmware version is 02.01.32A

  Any help would be greatly appreciated!

  Thank you.

  Giulio.

  Problem solved, after upgrading the firmware to the latest version, although the problem was not the firmware.

  The problem is on a fault line desing of the Sansa. The male jack to the headphones should NOT be inserted completely into the socket because otherwise, either you hear anything like that or you ear the Sansa jump audio. It's amazing. The engineers who designed, which should be fired instantly.

• Sansa clip 2 GB trying to load but quit unexpectedly

  My Sansa Clip 2 GB begins to demand, but stops after about 20 seconds.  It remains always connected the rest empty battery icon.  For this reason, I can't keep the unit to perform all operations.  Help is appreciated.

  The problem was solved by Sandisk.  Their solution is shown below:

  If the player does not load, there may be more than one reason.

  First of all, your Sansa Mp3 player should be charged when connected to a computer that meets the system requirements:

  -Windows XP or Vista
  -Windows Media player 10 version 11 or

  Initial charge time is 3 to 4 hours. The State of the battery will be completely shaded when completely charged.

  Second, if your reader part or all memory is damaged, the player again to read the memory over and over again, so it drains the battery more quickly, to format your Sansa Mp3 player.

  Note: Set FORM WILL ERASE all DATA ON YOUR DEVICE. MAKE A BACKUP OF ALL YOUR FILES ON YOUR COMPUTER.

  1 turn off the player. You may need to slide up and hold the switch to completely turn off the player.
  2 Activate button (orange must be visible) and press on and hold the Center button while connecting the player to the computer. Don't let go no these key until you see connected status on the player.
  3. single right click workstation in your office. Choose 'Manage' in the menu. In simple window computer management - click on disk management in the left pane. Search for "Removable disk" icon with a drive letter in the right pane and right-click and select "Format".
  4 make sure these fields in the Format dialog box:

  System files = FAT32
  Quick format cannot be verified

  5. click on start. Confirm on the notification.

  6. test the device to transfer music to the player.

  Finally, this is due to the firmware corruption or failure. We need to upgrade the firmware of your player manually to delete this type of corruption.

  Sansa Clip Firmware download Update:

  1. turn off Mp3 player
  2 turn the unit on hold (move, hold down the button until it shows orange)
  3. press and hold the Center button
  4. connect the mini connector on the device (don't forget that the USB is connected to the computer)
  5. download and extract the .zip file to a folder on your desktop:

  Click here for the Sansa Clip Mp3 Player Firmware update file

  6. Once extracted, drag the file or copy the *. BIN file in the directory root of your Sansa Clip.
  7 disconnect the Sansa Clip and let it restart.
  8. the update of the firmware will now begin.
  9 once he finished finally make his update, it will start back upward. After his return to the main menu, go to 'Settings' > 'System Info' and check the 'Version' is now 01.01.30A.

  To completely register your product, please provide the following information:
  -What is the operating system running on your computer?
  -The computer make and model.

  You can also visit http://kb.sandisk.com, our keyword online searchable knowledge base questions, to easily find answers to your Technical Support and Service the customer for all SanDisk products. Simply enter your search terms and our knowledge base will search a vast database of frequently asked questions as well as our forums online at http://www.sandisk.com/forums for you to provide the most complete answers possible.

• I forgot my Adobe ID code I was able to get a new password and my email has not changed, but it seems to me to need an Adobe ID to start using my Photoshop elements 12 new. What should do?

  I forgot my Adobe ID code I was able to get a new password and my email has not changed, but it seems to me to need an Adobe ID to start using my Photoshop elements 12 new. What should do? It's incredibly frustrating!

  Thanks, Sarika, for trying to help me. That link led me to more than one set of steps and I didn't know what to do. But I started to change my password for the 2nd time and struck me somehow to where I can now user ss12.

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Sansa Clip 2 GB shows "Connected" when the charger is plugged

  I have a Sansa Clip 2 GB is around the age of 6 months.  He played very well for 5 months, but for the last month, he periodically left the game and shows 'Connected' when the charger is connected.  I can sometimes turn off and on and it will start working again.  He will play for awhile, sometimes minutes, sometimes a few days and then stop playing again and see the "connected".  When he is in this state it will load but not play.  I tried 3 different Chargers and all have the same problem later.  I updated the firmware of 01.01.32 but no help.

  Someone knows how to fix this?  TIA for any help.

  OK, here is the last, this problem is resolved, but he caused a new sorta related problem.  What I did I deleted all my files and just put all the songs in the Music"" folder.  This seems to have solved the problem where it says 'connected' and stop playing, however, now it plays a day or two and then stops himself.  I just press 'Play' and he starts going again, so it is not much more than an annoyance I can live with that, and I could see where maybe he could do so on purpose after she played all the songs, but why it not it that way when I got it?  He played continuously day and night for months as a first step.  I'm confused, but I can at least live with the Clip now.

• IPhone not detected, but it was earlier

  Earlier, it has been detected sometimes. I don't know the main issue. I had a damaged cable, but a previous version of itunes. I had the intention of iOS 8.4 update to the latest version as some tech of a store person said he could help the battery drain issue.

  iTunes doesn't detect it easily, but once he did, I saved everything. However, itunes says that update, I have to update itunes. soon, updating (or after synchronization), my phone is more able to be detected. I read an article online that said to uninstall the driver in order to to refresh. It replaced the pilot apparently by a new, but windows doesn't detect the phone easily (but), and yet he sometimes showed the phone in 'my computer '.  Sometimes only from my computer.

  He was not in the Device Manager. I tried this trick to remove the lockdown folder when itunes has been closed. However, itunes has always not show it, but the phone was showing in 'my computer '. Now, it is difficult to know what is happening. I want to have the unit recognized in itunes.

  I also bought a new cable since I had some mistakes with other one in any case. But when my iPhone 5 is shown, it now appears as a portable device, it seems that I can access it through "my computer".   After watching closely in the Device Manager, it seems that he went from one category, I think to portable devices. but it is not recognized by itunes. I think he was previously in the storage controllers.

  How should I do? ITunes thinks that's not on my system.

  https://discussions.Apple.com/message/27675319#27675319 found the solution myself.

• HP Deskjet 812c - CMY new cartridge (HP 23) - yellow does not print (but it is)

  Yes, I know... it is a dinasour printer but it has been a workhorse for me since I bought it when it first came out (1998!). I use it often, but she remained loyal.  Judged non HP cartridges, but they are not as good, so PLOPPED down the money for a cartridge HP 23 CMY legitimate again.  Expiration date: December 2013.

  I can see the streaks of ink for all 3 colors on the head of nozzle/so that means there are in there, and all the rest print - C M and K, but not of Y. I tried some old cartridges that I forgot to recycle in the hope that I could get some of them out of one of them though but weak , but that no longer works.

  I also tried to print from more than one program and Windows 7 generic print test page in the case where there are a few color program setting somewhere that was the cause.  Banned, same result overall. I swab clean the nozzle/head, lined up, even began.  Always without Y.

  I wonder itf it's a question of management of system colors, although if there are streaks on copper head of the 23 HP where it meets the surface of the paper, it seems to be working, just do not hit the paper.  Electric prods on the printer which meets the back of the eye of the cartridge clean too.

  Maybe it's a cosmic hint to get a new printer, but I live on a fixed income from social security and every penny counts. I paid too just for a new cartridge.

  Suggestions, hosted solutions.
  Thank you.

  ~ Philp Knight

  Hi Newsoniclight,

  If this is a new OEM cartridge, and it is not printing yellow the first thing to do is to follow the steps outlined in the document below, and then if you continue to have the problem, you can support in the 800-474-6836 since the cartridges have their own guaranteed separate printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Lack of color, wrong color or streaks in print:

  http://support.HP.com/us-en/document/bpa00224

• Satellite U840 - battery not detected but is able to load

  I'm on a Toshiba satellite u840, now that its battery is not able to detect, but it can be loaded and also after a while amount after charging, it can be used without the main cable. But the main problem is that my laptop is unable to detect the battery, I don't see how much battery power is :/

  Need help please, I don't really know what to do

  > But the main problem is that my laptop is unable to detect the battery, I don't see how much battery power is

  You mean the icon does not appear in the taskbar or what exactly do you mean by + I don't see how much battery power is +?

  What Windows system do you use?

  If you are using Win 8 try run and use the command: sfc/scannow
  Here is the description: http://support.microsoft.com/kb/929833

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

• Skype detects microphone does not detect but no sound through it

  Hello

  I have my headset connected to my card his and my card its connected to my PC via the USB cable. I tested with two cables different and three different ports.

  When I connect my headphone directly on the PC, everything works.

  When I connect it to the sound card, the microphone is detected but when I talk to Skype levels will not upwards, unless I'm talking really loud or put the microphone almost inside my mouth. The thing is, he works outside of Skype. I put the setting on windows to hear what the microphone picks up and I hear what I say, but it does not appear on the levels of Skype.

  Any solution to this?

  Thank you

  And apparently, the sound card has an option "noise gate" turned to 100% which, for some reason, did not allow programs capture levels. I put it completely, and even though the quality seems a bit tipsy, it works now.

• Computer laptop 15-f211wm Mod #L0T32UA: USB external HARD disk and laptops not detected but used to be

  My USB ports do not seem to work properly.  I used to be able to plug in my external hard drive and mobile phone to transfer files, but now I can't.  In the DEVICE MANAGER of the laptop, nothing seems to be wrong, no red or yellow warning.  However, the USB ports DO not seem to power the devices, my cell phone goes into charge mode and my HDD Seagate you can feel it vibrate slightly.  There are two USB ports on the left side and one on the right, and all three can not detect devices.  Help, please.

  HERE IS a GUIDEto solving the problems of USB such as described in the post.  See if any of these help.  As you have posted in the notebook section, when you do that a single step to cripple, also remove the battery after the computer shuts down, unplug charger, too.  Then hold the power button for at least 30 seconds before feeding back.

  BTW: have you tried to delete all things under the rubric of the USB in the Device Manager, then reboot to allow Windows to reinstall the USB ports?