my new speakers do not work even if its on and the model says it works fine. I get no sound form my computer.

Similar Questions

• T440p - speakers do not work

  Hi all

  Just got a new T440p today and the speakers do not work, they produce only a "popping" or a pinging all the time. The works of 3.5 mm audio output.

  I tried the things:

  • Install the latest audio drivers from Realtek and Lenovo Web site
  • Change audio mode to 'classic' in the Realtek Control Panel
  • Using the default Windows audio drivers
  • Reinstalling Windows 8.1
  • Test speakers under Ubuntu 14.10
  • Reset the BIOS Setup
  • Update the BIOS to version 2.28
  • Downgrading to BIOS to version 2.26 (note: I have curerently have installed 2.28)

  I managed to get my speakers working at the end of the day, by restarting the Windows audio service, and the fix has persisted through a reboot.

  If someone else gets the same problem:

  1. Windows key + R to bring up the Run dialog box
  2. Type "services.msc" without the quotes
  3. Locate the audio service Windows in the list
  4. Right-click-> Reboot

• S2716dg - built-in speakers do not work

  I got a new S2716dg for Christmas. It took some adjustments, but now I love it (the gamma is much too high out of the box).

  Just one problem, the built-in speakers don't work at all. I have correctly set the audio source and reinstalled the Nvidia drivers with no luck. I can plug the headphones on the monitor and hear the sound, but the speakers do not work.

  I tried to call telephone technical support, but the tag of express service for this monitor does not work if the time-out to have my abandoned call was twice as long. Is there a way I can call directly for assistance to the Canada without having to go through the routing of calls?

  See the S2716DG User Guide. The S2716DG not built in speakers.

  Audio output port side is only for headphones. OSD (On Screen Display) - Audio only adjust the headphone volume.

  

  The bottom line audio output port is for external speakers.

  

• Why the speakers do not work

  My speakers do not work

  * The position proposed by the facilitator at the appropriate forum category (for Windows |) Windows 7 | Other applications Windows Windows | Windows 7 | Hardware & drivers). **

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers here http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149

• Windows 7 on my IMac internal speakers do not work

  Good day my Windows 7 on my IMac internal speakers do not work? I don't know what to do.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Is it possible to return to the synchronization of the former in Firefox, as new synchronization does not work.

  As new synchronization does not work for me, despite the setting it in total compliance with the Mozilla Web site and no one took the trouble to answer the previous post today, is it possible to return to the synchronization of the former?

  To the best of my knowledge, the synchronization of the former is no longer available.

  If you post some details on the problems you are having with the sync, we can try to solve your problem.

• Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• new tab (+) does not work after the upgrade to v 23.0.1 forefox

  I had firfox version 22 I guess... Now, today morning I upgraded to v 23. It displays a message from one of the plug-in is not compatible with wud and therefore be disabled. now later I still once downloaded the plug in to check if its works or not but TI worked (as I had already guessed), or its display in modules or plug-ins.

  Now I don't get why the new tab does not work. Not at all. Its so very annoying. I googled the question and tried to reset firefox and the new tab in subject parameter: config. But nothing helped.

  I think that its because of this plug-in I've read somewhere that the parameters can be getting replaced by one of the defective Add-ons.

  Help, please.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can use the SearchReset extension to reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• The new tab (+) does not work, or the file/new tab feature

  The new tab (+) does not work. The function of the file/new tab does no more work. Both had worked correctly until noon today. I haven't added any software, plug-ins or extensions today, I do not have the Ask toolbar. I tried several of the suggestions made on this site, nothing helps.

  This problem may be caused by an extension that does not work in the current version of Firefox.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Satellite P100-240: speakers do not work

  I have a Satellite P100-240 with built-in speakers. Recently the speakers worked intermittently with no control over the volume (the volume was extremely low). Now the speakers do not work at all, either from a cd or a sound system.

  Can you help me?

  Hello

  You must know that in such cases is really not possible to give a precise explanation. If the audio device is installed correctly and in Device Manager is not listed as problematic there must be a problem with the settings.

  First try to check all the sound settings and make sure that the mute box is not selected. Also check dial volume control. If everything is set to max level and no MUTE is ENABLED, please check the features that you use headphones.

  Please post the results.

• Speakers do not work on my Satellite Pro U200

  Hello

  I have problem - speakers do not work.
  If I plug the headphones on making mini-jack - works perfectly.
  I have installed WinXPPro.
  Probably I need a driver, but I put t remember the name of the driver.
  Any ideas?

  Thanks for your help

  I agree with Akuma.
  If the headphone jack works it looks like a hardware problem. Maybe the internal speakers are faulty or not connected properly to the motherboard.

  The best way would be to contact an ASP. They can check your laptop and swap the internal speakers if it of necessary.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Portege M750-11W - new battery will not work

  Hi all

  can anyone help, I got 2 batteries for my protégé m750-11w and they do not work and I wonder what I have to do a BIOS update for them. The batteyr in my protégé is PA3191U-5BRS and two new batteries are the two PA3191U-1BAS, and he says that this battery work where the - 5BRS was in use.

  I updated my BIOS from version 1.6 to version 3 already and the battery still does not work I just get a blinking white cursor in the upper left.

  Someone know where I can get an update of the BIOS except this battery?

  Thank you

  Tom

  Hello

  This means that Windows doesn't start with new battery and you see only the blinking cursor?
  This strange s you have connected the AC/DC adapter?

  In my opinion, you must fully charge the battery before starting Windows. After that try it again.

• L300 satellite speakers do not work - no audio device not detected

  I just bought a L300 and the speakers do not work.
  The computer says there is no audio device detected and when I checked it is said more far there are no drivers installed for the speakers, and I can't find a way to install them. Can anyone help?

  Can I ask you if you use the OS preinstalled Toshiba?
  The message; No audio device detected means that it sound card doesn't work.
  Why? Well, maybe the audio driver has not been installed properly?

  Please check this!

  PS: Is there any yellow exclamation point in Device Manager?

• My helmet is bright red, and the speakers does not work, when I try to adjust the volume when there is no headset/speakers in, there is a sign of the cross as the symbol of the volume where the places are supposed to be, macbook pro retina display

  My helmet is for some time, as the eye of the terminator, glowing and speakers have not worked since. I need to plug headphones or external speakers. Whenever I try to adjust the volume when it shows just a cross symbol under the sign of the volume, where small squares usually are (see below)

  

  Is there a way to fix this? Some other similar forums tell me to try to manually move a switch in the audio jack, but I can't seem to find such a change and the thing that seems most like a light switch, does not move.

  Can someone please help?

  Thank you

  Your audio output is stuck in optical mode, this is the red light.

  The solution is to try to insert and remove the plug a dozen times or more in the hopes of convincing making fall out of optical mode and in electric mode.

• W700 speakers do not work

  I noticed recently that my speakers do not work, but when I plug in my headphones I can hear everything. I could use some help to solve this problem, thank you!

  Well, I can't quite explain it, but my speakers work now after the multiple computer restarts. Ah, well.