My PC is always on auto repair at startup and when I try to change things that ot says that he is not administrator

Similar Questions

• My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  Original title: security settings

  My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  How can I solve this problem

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the full error you get, when you try to activate windows Defender?
  4. what anti-virus is installed on the computer?
  
  Method 1: Check if the Windows Defender service is enabled.
  a: Type Services.msc in the start search box and click on enter.
  b : now, look for a service called Windows Defender, double-click to open it.
  c: Now Start the service and make sure that it is set to automatic.
  
  Method 2: Temporarily disable the antivirus and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  
  Note: Activate the anti-virus program after you perform this step, because it would protect your computer from threats.
  Note: If there is an antivirus installed, then it might be turn off Windows Defender, so temporarily disable the antivirus and check if the problem occurs.
  
  Hope this information helps.

• Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

  problem with connecting to the internet

  whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?

  Hello

  First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

  First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

  Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

  Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

  • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
  • In network and sharing Center, click on manage the network connections (on the left)
  • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
  • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
  • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
  • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
  • Click on close

  If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

  Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.

  Tricky

• I just installed and when I try to sign in it auto sign me and won't let me go... is this a normal problem?

  A that someone got through the installation and when you go to connect it do you? Ive tried everything

  This is a typical problem, get noticed on Windows computers.

  Follow the steps below:

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "automatically detect settings" is the only option selected, open the LAN Properties window.

  Then try to connect to the desktop creative cloud application.

• When I try to change the default program for opening a specific file type in the "always use the selected program to open this type of file" highlights not.

  So, I can't change the default program. How can I get it to show?

  Hello Swansong,
  It is also possible for Panel Applications - define how Firefox handles different types of files

• How can I get beyond Darwin appear on my screen. i book g3. has not been started over the years and when I try towers for always (like 1-1/4 (h) and then goes to a black sceen of darwin. I tried to boot from the disc, but I it won't let me see the hard dr

  My son tried to update the OS and now it will not be in service in any OS. Does not see the hard drive. But after the spin cycle for more than an hour, it goes into the black screen Darwin/BSD (my-name - Computer.loca) (console)

  Login: IOATAController buses blocking device.

  I tried to boot from the OS disk and may not see the hard drive to load to. I even used disk utility to erase all hoping to make just a re-install.

  Did he talk about Darwin?

  Also do not know if she had 10.2, 10.3 or 10.4 charged thereon.

  If the HARD drive is not visible in disk utility, then he is dead and must be replaced. When you start the computer to the disconnect is that the operating system cannot find a reader from which to load the OS. The last iBook G3 came with 10.4.11. The first iBook G3 came with 10.3.9. Many models of iBook G3, so I don't know what version of the OS is the minimum requirement for your.

• in hotmail, when I try to change my ID, he always says "you cannot change your windows live id at this time."

  It's the web browser "Cometbird.

  Hello

  Windows Live ID
  http://windowslivehelp.com/product.aspx?ProductID=10

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I am running windows xp and somehow lost my CD - DVD driver, and when I try to repair I keep the error code 0 x 80070003?

  My computer used to read CDs and DVDs but just leaves a day. I have tried everything that I met to fix but so far nothing has worked. I can listen to the internet radio and iTunes etc just anything on a disc. It cannot read the disc or the driver is defective or missing. Device Manager tells me everything is going well and when I try to update driver tells me that it cannot find a better match. I get a error code 0 x 80070003 and then he said: high context and I have no idea what it means. Have a link to a fix from Microsoft but afraid to use it. Can someone help me with the problem please?

  Hello

  I suggest you to disable all antivirus software and then follow the Manual steps mentioned in the link, and the check.

  Note: Don't forget to enable antivirus once the diagnosis is made.

  Windows Update error 80070003

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  If the automated FIXIT is not able to run then you can alos post your query to the FIXIT forum to:

  http://social.Microsoft.com/forums/en/fixitcenter/threads

• my laptop turns off when I turn it on, and when I try to repair or start I get a message saying that I have an error in my software

  I tried to re start and take out the hard drive, but nothing works I've only had this laptop for a few weeks

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Check to see if the problem exists in Mode without failure.

  See the article below for Safe Mode steps in Windows XP.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Step 2: If the problem does not persist in Mode without failure, then try to clean boot.  You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State: http://support.microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• When I open the display properties and click Desktop my options to browse is not even pop up again along when I try to change the theme of my computer freezes auto.

  My active desktop home page has been deleted . How I have difficulty or restore this problem?

  Hello DJ Zer0

  Try running the fix here.
  If it is useful or not I think that you should check for malware.
  Download and run Malwarebytes

  .

• I just downloaded creative cloud for the plan of the photograph, and when I try to connect it always says I am disconnected. Any suggestions would be greatly appreciated.

  Signed up for the plan of creative photography cloud and I was able to properly installed on my win7 desktop. When I try to install on my computer laptop win 8.1, I get the question "you are logged out. Looked on other forums and I think I can have it running on two machines at a time. Any suggestions?

  Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

  - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

  - and the "loopback" https://forums.adobe.com/thread/1504792

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Windows 8 is stuck on auto repair

  Hello

  My asus laptop Windows 8 is stuck on auto repair at startup. He would go to the blue screen with advanced with the refresh options, options restart.etc

  I want to restart my PC but I'm afraid that my Microsoft office will be removed from the laptop. He came with the bundle and was not preinstalled. I don't want to spend money on something that came with the real package.

  Can someone please tell me how I can go beyond the auto repair or restart without losing Microsoft Office and other program that comes with it.

  Many ways,

  Max fleet

  Hi again,

  We took the PC to PCWorld and the reason why it was a loop was because we are all off evil! We are just for Windows 8.1. Hope it will be more stable. Thank you very much for your help, I appreciate it a lot :D

• Stuck on the infinite loop of auto repair

  Hi guys,.

  Ive had a problem with my computer. I have the alienware aurora r4 and have and issue with blue screen and auto repair mode.

  The real problem is really the mode of auto repair. What happened is that when I did a windows update it ended to give me a bluescreen during loging screen when I start the computer. After 3 restart put me in auto repair infinit loop and since then I can't get out, not even will lauch and im safe mode don't really know what to do.

  There is no problem of harware, I run the ePSA to confirm this. but the main reason is that it is the second time this has happened to me. the first time windows upated this month he did the samething, but I would get blue screen after login. How to solve this problem the first time, is that I restore my system to a certain date, when I didn't have this problem. After this, I turn off the windows upadte until I get more information one why its done 2 days ago, it is accidentally turn on by my antivirus or maybe accidentally by me.

  Now it is stuck on this infinite loop for auto repair and I can't do a system files because it must be done in safe mode, or need to disable launch beginning of antivirus (not exacly how his writings sound penultimate option aloong SafeMode in windows 8.1)

  What I have to do is stop mode auto repair, so that I can operate either in safe mode or disable the antivirus at the beginning so that I can restore my computer to a day where it was working fine. The computer has access to the command prompt, so any code that can disable or ask the system that he has never mistake might help.

  There is a file that I really need to recover from this computer and also need to use this machine. Any help is appreciated

  Thank you

  You can get a better response if you re - post it in the forum of the Microsoft OS.

• I always get the error massage 0 x 80070424 when I try to update my computer.

  I can't open any file and when I try to update my computer, I just get a massage of the error which is 0 x 80070424, what can I do to fix'it?

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.

  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>

  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit 50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  07/23 / 1107:56:32

• Urgent help repair 6 Lightroom Catalog "Lightroom encountered problems reading or writing to the disk when you try to repair the catalog»

  My Lightroom Catalog worked perfectly until 2 days ago.

  When I try to open my catalog this error message pop up

  

  And when I try to repair my catalog a green bar progress displays briefly, then this pop up.

  

  I clicked on 'Retry' several times but it still does not work. My catalog is on an external hard drive with 1.46 TB of free space. I use Lightroom 6 on a laptop with Windows 8.

  I tried other things:

  • Looking for a .lock file delete
  • Create a new catalog and import the other catalog in it (when I try to it says "Lightroom cannot import this catalog.) This catalog doesn't seem to be a valid Lightroom Catalog.')

  Help, please! I have not all backups with that I can restore my catalog. I am a student in photography and it would be extremely annoying that I lost all my edits/flags of this catalogue.

  margaretp4683231 wrote:

  You never solved this problem?

  I am totally confused and aren't sure what to do next.

  You need a new external drive, and you need to STOP using your old.

  There is no real repair a hard drive once it starts to miss. Of course you can repair the file structure, but it's to get the file there. Once a drive starts to go wrong it will never get better or even remain the same.