My phone connects random screen activity when I am not in contact with her.

Similar Questions

• Screen answer when I'm not in touch with her

  Hello

  My iphone guard screen is freezing and don't answer or just the opposite will be starts randomly, opening the app / type messages / try block people or a ring. It's as if the phone is unable to overprint when I am not touching her.

  Yesterday, I wiped the phone, it did not work. I also updated to the latest IOS.

  Before I even re-installed by backup, he was doing things such as zooming, twinkling and try to type in the access code when I was trying to set up a.

  Does anyone have advice on how to fix this? I got on the phone for almost a year now, it seems to go through phases where he works then when it doesn't work but it has been done gradually worse and I can't use the phone now.

  Thanks for your help,

  Lauren

  I'm having the same exact questions.  I bought my iPhone 6 more on 2 December 2014, a little more than a year.  It behaves in the same way, working for a few seconds then the screen freezing or slow to react when they are hit, opening apps calling people, not affected, will not respond.  After the removal on the desktop, it continues to open things randomly.  It has a small "digital snow" box at the top of the screen when it starts to freeze, etc..  After the reboot of the force, it works temporarily and then again such things.  Very frustrating, can someone help please?

  Glenn

  iPhone 6 Plus, iOS 9.1

• Pavilion13x360PC: Pavilion 360 screen jumps and taps, when I'm not in touch with her

  Since I bought this House for my daughter (less than a year ago) that she had problems with her.

  The touch screen seems to have a will of its own. He draws from the left side of the screen, and when this happens, it has stop working and wait for it to stop which can take between 30 seconds and 5 minutes.

  It happens when she uses it for work or meters far to watch videos.

  My daughter is in the middle of GCSE work and it is so important that it stops as it is originally its indescribable stress at a time when his cell phone should be helping, please help!

  Hi @Quizzled,

  I will send a PM (private Message), please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  Thank you.

• Why does the url keep refreshing when I'm not in touch with her?

  I typed in the website (www.n2yo.com) and press return to open it. Unfortunately he keeps just acting like it is refreshing and not to open the Web page. That is to say the image to the left of the url continues flashing alternating with a square as the form, and the circle of progress and the line at the top just guard flashing and back to zero.

  It worked fine yesterday. Some parts of the Web site worked very well earlier today too. But now all the variations of a page in this site seems to do the same.

  Thoughts? Advice?

  I see the same thing during the visit of this website with Firefox and Google Chrome.
  
  I am looking for some JavaScript that runs on this Web site is broken I get a page when I disable JavaScript.

  The web console shows a lot of errors like these:

  An unbalanced tree was written using document. Write(), causing data from the network to be analyzed again. For more information https://developer.mozilla.org/en/Optimizing_Your_Pages_for_Speculative_Parsing @ http://www.n2yo.com/:12

  You can contact this Web site to inform them about this issue.

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• I put my cRIO 'DHCP' to 'local connection' and lost contact with her.

  I put my cRIO 'DHCP' to 'local connection' and lost contact with her.

  I changed the location setting labelled '2' to post a link-local only, so I think I hit save to '3 '.  So, I have had no contact with my cRIO network.

  I tried;

  Hit the reset button

  A MAX of opening closure

  Go to safe mode

  Lift the switch to reset IP

  Power cycling the cRIO

  Directly from the host to my target of cat 5 cable running

  None of it worked, and I have no contact with my cRIO.

  

  This is what MAX looks like now.  How can I fix?

  

  It turns out that I had more of a problem.  Corrupt drivers, 255 in many in my subnet mask, overly complex LAN, use server control... you get the idea.  So I just deleted all software, disassembled everything and more from scratch.  Now back to the top and work.

  Thanks for the tips everyone, all the pieces and peace where it is useful to help me see the bigger picture.

• I can't active my lightromm, the message says "not in contact with the internet", but the net is nice and I can't open other bridges soon

  I can't active my lightromm, the message says "not in contact with the internet", but the net is nice and I can't open other bridges soon

  Hi forrestfan,

  If you use the Windows platform, please try the steps below.

  1 reset the Internet Explorer settings to the default value.

  Reference: change or reset the settings of Internet Explorer - Windows help

  2 reset the Windows hosts file.

  Reference: https://support.microsoft.com/en-us/kb/972034

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Where can I activate the sign (the small white triangle) that comes when two clips are in contact with exactly in the timeline?

  WO reaktiviert man das indication (zwei kleine Weiße Dreiecke), das aufleuchtet, wenn zwei auf der timeline exactly zusammenkommen Clips. Hat Bisher're immer works, aber seit yesterday tut are das nicht mehr. Was muss ich verstellen?

  Where can I activate the sign (the small white triangle) that comes when two clips are in contact with exactly in the timeline?

  Hi Burkhart,

  Where the character (two small white triangles) that lights up when two clips on the timeline exactly meet reactivate them. So far, he has always worked, but since yesterday, it is no longer made. Should I settle?

  Where can I activate the sign (the small white triangle) that comes when two clips are in contact with exactly in the timeline?

  Microsoft® translator translator

  Looks like you have not snapping turned on. Click on the snap-snap-in icon, or press S to allow him once more. Works now?

  Thank you
  Kevin

• Blue screen comes when I do not actively use my PC

  I seem to get the blue screen when I'm not at the computer (Vista Home Premium).

  He spent itself turned off, then invites me to log in again. The only way I know that it's a matter of Bluscreen is the error messge after login.

  Then the computer behaves normally until the next time, it crashes.

  The error message begins:

  • Signature of the problem:
  • Problem event name: Bluescreen
  • OS Version:6.0.6002.2.2.0.768.3
  • Locale ID: 2057

  There is some additional information, which varies slightly each time.

  Someone at - it wise to it?

  Thank you.

  Mark

  Hi Mark,

  It seems to me that this is a problem that occurs when a powersaving/screen saver function is triggered.

  I tried to disable any screen/Powersaving saver and see if the blue screen is.

  You will find an article on how to disable powersaving features in vista here >

  Kind regards

  Joel

• After update my iPad iOS 9.2.1 to 9.3 live 2 I can't connect to the activation server and does not have the latest version of iTunes to activate

  I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.

  Thand you

  same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad

• Just bought a msi gtx 750 ti OC edition.when installed does not start, ends with a black screen and the cursor

  As indicated in the title, I bought a ti 750 gtx.

  N750Ti-2GD5/OC

  The machine had a 620 in gt and works very well with it in. When I install the ti 750 gtx, however, the boot system hangs on a black screen with cursor / underscores and a single beep.

  The system is a h8 1203, with a power of 460.

  I also have a gts 250, that also installs and works fine. Ive read a little, and there is a problem with this map and the hp system? something about the type of bios? I couldn't quite follow what has been said.

  Hello

  If you upgrade to Windows 8 (UEFI-mode Setup) and apply the BIOS posted updated so you should be able to work to the video card.

  Don't forget to create a set of external support of HP recovery before installing a new operating system.

• Remote Desktop connection requires the password when I did not

  I use Remote Desktop Connection to connect to my Windows 7 PC to computers with Windows XP employees. To do this, I need to put the credentials of the computer XP (name of login and password). It is a problem because the computers do not have a password. They are implemented in order to bypass the login step. How would I go about the use of DRC to connect to a computer without password?

  See if this article solves your problem:

  "How to turn on Remote Desktop automatic connection in Windows XP"
    <>http://support.Microsoft.com/kb/281262 >

  HTH,
  JW

• Flashing random screen Satellite Pro P200D-10A

  I've owned this wonderful machine for only a few months and my only complaint is that every day or two my screen begins to blink so I can see just enough to go to start and log off. Yes, disconnection is the only solution that I have discovered to get him to stop. I can connect immediately and it's as if nothing was ever with her.

  No one knows the cause or solution for this? My husband is a programmer and he checked several times but nothing helped. If anyone has any suggestions, it can have another look. I really don't want to have to send it to the company :)

  There are new updates for this model? You can google this particular model throughout the day and you will never find an English website.
  I live in Germany where this laptop came.

  However, I don't speak German.

  Well I think we should first of all whether it is a hardware or software problem.
  I think it might be something wrong with the graphics card or display, but this is just my own opinion.

  However, sometimes a BIOS update or an update of the graphics driver could help too.
  So I think that you should first check if a newer version of the BIOS and update the graphics driver is available on the Europe of Toshiba page for this series of books.
  Then update the two parties.

  If it doesn't help then I recommend you contact the maintainer authorized Toshiba in your country for a control of the laptop.

  According to your message, the laptop is not very old and the warranty must cover all

  Good luck

• How can I get the sim unlock card or carrier unlock t mobile USA, I use my phone in India and my sim card does not work and when I checked with the apple support, they said, it can be locked my previous carrier T-mobile USA, which is a solution

  How to unlock carrier T - Mobile USA, that I'm unable to use my phone in India as it says sim does not, I checked with Apple support they said previous carrier may have locked

  You will need to contact the carrier, it is locked to and follow their unlocking procedure. Only the carrier to ensure that it is locked can allow and process a request for unlocking.

• Explore Windows 7 64 bit slow loading screen and windows welcome does not

  Hello guys :D

  I had this problem yesterday and look really weird because I use several method to solve for 'Blocking with the Welcome screen' or 'Windows Explorer is not responding. So here's the problem:
  As I said, I had the windows with the "Welcome" screen stucks But some time later, about 15 minutes that it full load. Well, THIS IS more BIG PROBLEM: my office was black with my cursor! About 10 minutes, this return to normal, BUT the icons are not loaded. And when I click on any folder or right click of mouse, WINDOWS EXPLORER IS NOT the ANSWER (error status code c0000185 InPageCoFire) and need to restart. I restart and once again, does not. My laptop is now like that, turn on, wait 15 minutes and watch "Windows Explorer is not responding" and turns off.
  It makes me really mad. So I really appreciate for your help. Sorry if this question was asked before

  Uh, seems to be still the gel, you can try another way! Enter again the Advanced Boot Options, then choose 'Safe Mode'. Your loading windows basic drivers and services that could help you get into the windows desktop without encountering any problems. Once you're in safe mode, tap Start menu and search for "cmd". Right-click on 'cmd' and select them "run as Administrator". When the command prompt appears, check your disk file system error hard by typing "chkdsk c: /f" (do not type the quotation marks) if "c:" is a drive letter on your Windows 7. Restart your computer, and it checks file system of the disk for errors. When the analysis was finished and reboot, re-enter the Advanced Boot Options, choose "Safe Mode" again. And then open command prompt with administrator, and then type this command "sfc/scannow" (do not type the quotation marks). SFC (System File Checker) can check your file system were healthy or not. Wait until after the analysis. Then, restart your computer. If these tips don't help, update your status question. :)