My phone does things by himself.

Similar Questions

• BlackBerry Haunted Z10 Z10 - my phone does things by himself

  My Z10 is suddenly do things in itself!

  It opens, closes, changes things by itself. I can sit and watch the screen change. And when I'm doing something, well, forget... He's starting to do other things. Sometimes, the screen freezes and I can't open some things but can open other things; for example, I can't open a message in the hub, but I can drag out of Hub.

  I tried to restart and remove the battery. The screen is clean and dry.

  Any ideas to fix this?

  Odd. Then I don't have any idea.

  Keep watching it and if it continues and you can reproduce the problem, take to the seller and get a replacement under warranty.

• My phone does not turn, but I can still hear things about her

  My sistere phone does not turn but it's on fees and I can still hear things, so if people I message I can hear it but I can't turn on my phone. Help someone, what shall we do?

  A forced reboot can help. Press and hold the Home button and the buttons On / Off for about 15-20 seconds, until the Apple logo appears again. When the logo appears, release both buttons.

  No content is affected by this procedure.

• phone does not work

  phone does not work

  < re-titled by host >

  does not

• APPLE 5S PHONE DOES NOT RING ON INCOMING CALLS

  APPLE 5S PHONE DOES NOT RING ON INCOMING CALLS

  1. Have you checked to see if you have the volume mounted on the ring?
  2. Have you checked to ensure the silence on the side of the phone is not set to mute setting?
  3. Have you checked to see if you disturb not activated?

  

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• My phone does not always sound

  MY phone does not always sound. I miss calls

  Hi Lizhel,

  If you do not hear the ring of your iPhone, it may be due to a reception of the issue called. Fortunately the article below the link Details a number of measures that can help to ensure that you are well able to receive calls on your device.

  If you can not make or receive calls on your iPhone
  https://support.Apple.com/en-us/HT204027

  Kind regards!

• my phone does not ring when there is an incoming call.

  My phone does not ring when there is an incoming call.

  Have you checked if it is on mute?

  The "secret" key is above the volume buttons on the left side of the iPhone (red = mute is enabled)

• My Hp laptop computers microphone phone does not work. No one can hear me. ??????

  My Hp laptop computers microphone phone does not work. No one can hear me. ??????

  Hello

  Look at this:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/my-micro-phone-is-not-working-no-body-can-listen-to-me-i-heard/m-p/1158987

  Kind regards.

• Home phone does not receive calls since I've implemented HP 7520

  I can't receive calls since I installed the HP7520. I tried to change the settings in fax several times. The phone rings on the end of the appellant to another and they can leave me a voice message (via the phone system) but the phone does not ring on my end (in the House) and the caller ID shows either of the appellants. I tried all the different settings fax too. and a sample fax comes through when I do the "Fax Wizard.  I called my phone, and, as expected, they were no help.

  Thank you

  I'm sorry that you are experiencing this issue. I would like to ask you some questions to see if you have everything set up correctly.

  1. do you have a facility with the internet, phone and cable set (modem and everything).

  2. do you have an answering machine plugged anywhere?

  You should have the printer set in place by the following text:

  1. line 1 on the printer should go directly to the wall outlet (or LINE 1 on the modem, if you bundle).

  2. the phone should go straight into the LINE 2 of the fax machine.

  3. settings in your fax can be given to the way that you want.

  4. go to your fax advanced settings.

  5. turn your Error Correction Mode (ECM) - OFF

  6. put your FAX SPEED to SLOW

  7. your rings before answer may be what you like.

  Let me know if it helps.

• Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  I have two identical, the Samsung Galaxy phones, it connects to the pc to transfer files either does not connect despite the many possible corrections, I've read online by train.

  The phone tries to connect but is a problem of the PSG, while it is plugged said to install the driver, then momentarily, it says ready to use and then goes back to install driver again, it done a few times and then says failed.

  I tried to reset the phone to factory settings, reinstall the driver etc etc but nothing I tried works.

  I've read other posts of similar questions and have created a mtltrace.etl file, but I don't know where or how to download for investigation.

  Any help appreciated

  Hello Rob,

  Thank you for the update on the issue.

  I suggest you to uninstall all the drivers, that is Samsung as well as Bluetooth.

  Then, restart the computer and plug all phones Samsung three each so install the drivers and software from Samsung kies from the link below:

  http://www.Samsung.com/UK/support/model/gt-S6810PWNBTU

  After installing everything that the Samsung and then restart the computer and then plug the adapter Bluetooth (driver installation) and check if the problem persists.

  Thank you.

• BlackBerry Smartphones phone does not ring when unknwon number calls

  Help, please. It has just starting happening.

  If a phone call is received several steps that my conatcts list, the phone does not ring.

  Any ideas anyone.

  Thanks rich.

  It may happen that the profile exception is active.

  To check this go to profiles -> Advanced -> uncheck all check user profile except fo:

• URGENT blackBerry Smartphones: phone does not start after update (21/05/2009)

  As indicated in the title, my phone does not after that I updated last night. He mentioned that he will not be able to make any calls or anything for the next 2 hours, but after the time of 2 hours, it seems to fail during startup.

  At first, I thought it was battery problem that the screen is not actually light up and so I charge my phone. So I just realized even during the loading, the bright red light (LED) Dungeon blinks from time to time. I look closely at the screen and you can vaguely see the logo of loading.

  It is, he does not meet one of the buttons. None of them activate the backlight on the Dungeon of the flashing display vaguely similar to when I first pluged load.

  I suspect that's not supported properly.

  Please anyone can solve my problem as soon as possible, since one day it stopped working and already cause me trouble.

  Thank you very much

  Alfred

  Hello!

  Sorry about that... I have no direct experience with your situation and therefore has no direct information to communicate. But I remember an article that I had heard about bringing a BB masoned to life. Check it out here:

  http://adlen45.ActiveBoard.com/index.spark?forumid=123568&p=3&TopicId=18834966

  I have no idea if data are useful or not... but maybe it's a start for you.

  See you soon!

• tablets and the location of phone does not work after update of the muse

  After the update to the new version of Muse and upload the site converts the tablets and version phone does not work as before.

  So I have to restore from a backup site

  Have you seen the list of known issues in the troubleshooting with Adobe Muse 2015.2 questions ?

• If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

  After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

  Hi Pharao-nael,

  I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

  Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
  Configure and use third-party Bluetooth - Apple Support Accessories
  

  Turn off pairing a Bluetooth accessory

  To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

  When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

  Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
  

  Pair your device with a Bluetooth accessory

  1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
  2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
  3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

  When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

  Thank you for using communities of Apple Support, cheers!