My picture is not correctly displayed in mode develop.

Similar Questions

• Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Try turning off the GPU. Go in Edition > Preferences > Performance (Lightroom > preferences > Performance on a Mac) and uncheck the box use Graphics Processor.

• Change is not correctly displayed in the develop Module

  When I make a change in the develop Module, changes are not correctly displayed in the main window and the browser window becomes gray. When I get back to the library Module, the changed image appears correctly. Then when I get back to the develop Module, the changes appear correctly. I followed the troubleshooting steps and a single point Adobe says that the permissions of the user is perhaps not good. I created a new user, and in the new user profile, LR works as it should. I use Windows 7. What should I change in the old "user permissions" to match the new "user permissions"? I prefer to delete the new user, rather than recreate my environment all over again.

  If you see gray windows to develop, it is almost generally a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you do not have a calibrator, try to go into the properties of your screen pane. Go to the color management tab and remove any profile associated with the parser.

• Web in Muse not displaying fonts do not correctly in design mode

  Curious problem - in mode Design of Muse, Web fonts are not correctly displayed. However, in preview mode, they will display correctly. Is this a bug, any ideas?

  Thanks in advance,

  Mickael the Bomin

  Please try following the steps as in the thread below: -.

  Source without Pro does not display "Design".

• List of the albums of songs is not correctly displayed on any iPad

  I noticed that the list of Top songs is not correctly displayed on any of our Ipads, but it is on the iPhones.

  Please see the image below.

  

  It should be "Best songs" in the upper left corner, and where the 2 circles broken are inside should be read (Top Songs) & (Top Albums) in a border, like the other lists.  Because these buttons are missing, I can't use this list.

  I have a family membership to the apple's music, and the problem occurs on 4 separate Ipads, with 4 separate apple ID's

  I erased and reset the ipad, and to restart the problem is solved, however as soon as I finish the music to apple and then soft reboot the problem recurs.

  Anyone else have this or have any ideas?

  I have the same problem and not a clue how to solve this problem:

  Button of the top missing graphics on iPad.

  I guess it's a popular bug...

• Acer site does not correctly display the specification.

  Acer site does not correctly display the specification.

  Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

  Thank you bring to our attention. We will ensure that it is transmitted.

• Animation is not correctly displayed in Firefox

  My animation is not correctly displayed in Firefox. Have searched this forum and others, I am only able to find solutions exceeded (such as the update to the latest version of Animate). I'm on the later versions of Animate and Firefox and still problems. Anyone know of a solution to this, or can I directly me to a discussion which has already covers it?

  One interesting thing to note is that only the tree Centre is differently, the commands for each seem to be the same. The small mountains are also fine, but not Mount Rainier.

  Here is my test page:

  http://jonnyart.com/test/NewYearsAnimation

  Thank you!

  In case someone else runs into this problem, I was able to solve it by rebuilding portions of the animation.

• Edited in Photoshop does not correctly display in Lightroom after recording the images

  Hello

  I recvently EU cloud Adobe and upgraded from Lightroom 3 or 4.  Since the upgrade I had problems with Lightroom not correctly display images edited in Photoshop.  Instead of the photoshop image, it creates a new jpeg image and appears in the library.  the PSD is not loaded into the library.

  I take a jpeg image of my library and shoosing the change based on Photoshop.  By selecting Edit a copy, I'm tried with the original and edit a copy with lightroom adjustments as well as with the same results.

  In Photoshop, I duplicate the base layer, the image upscaling, running some filters, addition of volunteering adjustment layers.

  I save the image in Photoshop format in the original folder where the original jpeg was in the Lightroom library.  I record with maximize compatibility on.

  When I return to Lightroom, the catalog displays the two files, the original jpeg and a copy identical to it, NOT the new file in photoshop with alterations.  If I go in the folder images occupy in the Finder using the Finder command show two images link to the same original jpeg format.  The modified file to photoshop is there in the folder but does not appear in Lightroom unless I drag and drop it.

  I've disabled all the filters and ensured that the sort is sort by name.  The image does not automatically appears in Lightroom after mounting.  Any suggestions?

  Thanks for any help!

  PS. I'm not looking for the subject, and there are discussions since 2007 and lightroom 2 but their solution was to start from scratch basically and I have a carefully labeled, starred and labeled catalog of more than 30 000 images and really don't want to do that

  Images that are edited in Photoshop will be displayed automatically in Lr only when the image file saved in Photoshop is identical to open LR.

  You say you open a jpg of Lr, then edit in PS-among other things-adding a few layers. Layers are not supported in JPG format, so you must either save it as a psd or a copy in jpg.

  In both cases, is not the same image as the one opened in Lr file, so it will have to be imported into Lr appears. If flatten you your image after editing in PS and then do a to your JPG - not a - it will be displayed in Lr.

  PS: the only exception is when you open a raw image from Lr into PS and you save it to PS in the format of file specified in Lr for external mounting. The saved file is automatically displayed in LR.

  Post edited by: web-Weaver; PS added

• Topics restores do not correctly in design mode

  When you use em sizes or in CSS, the titles are not correctly make in Design view (HR 2015).

  This allows to reproduce very easily: create a blank project, edit default.css and make the following settings:

  H1, h2, h3 {p}

  do-family: Arial;

  do-size: 100%;

  }

  Now the headings 1, 2, 3, and paragraphs should all displayed in the browser's default font size (usually 16px).

  In the overview of the topic (and in all modern browsers), this is exactly the case:

  

  However, looking at the same subject in Design view, all titles are displayed in different sizes, and each of them are too big:

  

  It seems that design mode is ignores education % of the size of the police and set uses inherited sizes instead.

  With 1em instead of 100%, the behavior is exactly the same.

  Therefore, I'm unable to use % or em sizes in my HR project because headers are displayed in sizes ridiculously blasts upward. (In the example above, they are not, but normally you would use something like 180%, 150%, 120% for securities).

  It is very unpleasant, as using % or em is state-of-the-art for the delicate design. Can you please fix this or provide a work around? Using px sizes is not a workaround solution ;-)

  This a very annoying bug that's been around for years. Please log a bug with Adobe report: https://bugbase.adobe.com/

  As a solution, I use 2 CSS files. A point that I use to work in RoboHelp. And the other I have manually add to my output to crush the fixed size of CSS. No easy solution, I'm afraid.

• Webfont is not correctly displayed in Design view or in the list of fonts

  Muse to update and now my topic times (Nunito) does not display correctly in design mode or on the list of fonts. It is, however, not display correctly in preview mode. When I try and delete the police, and then add it again, I get an error message that says that the police cannot be added. Any idea what's going on?

  Hello

  Please, try the following steps. I hope this will fix the problem.

  1. close the Muse

  2 rename the folders named tk1 and tk2 in the following locations

  On Windows: %appdata%\com.adobe.AdobeMuseCC.2014.2\Local store. You can type this in the path bar at the top of the Windows Explorer window

  On Mac: ~/Library/Preferences/com.adobe.AdobeMuseCC.2014.2/Local store. You can type in the dialog box go to the folder (shift-command-G)

  3. launch Muse and add the police

  Please let me know if that helps.

  Concerning

  Vivek

• In Photo, pictures are not chronologically displayed

  Loading images from 2 different cameras on the same internal clock, the photos are not chronologically ordered and displayed

  You are looking in the album 'Pictures', where photos are displayed in the order they are added, you must look in 'Photos '.

• My computer does not correctly display web pages?

  On some web pages the boxes are stacked, for example on the MSN homepage ads pop up in the left corner of the screen on the top of the page instead of on the right side, and on the right hand side where they should be it's an empty box? Other pages display does not correctly? I don't know how to fix this or why it happened?

  Hi ChristineDupre,

  1. what browser do you use?

  2. don't you make changes on your computer before this problem?

  If you use Internet Explorer, you can follow these methods & check if it helps.

  
  Method 1

  You can follow this link and check if the problem persists.

  Some sites Web may not behave as expected in Internet Explorer

  
  Method 2

  If you have Internet explorer 9 installed, please follow this link.

  Web pages displayed incorrectly in Internet Explorer 9

  Hope the helps of information.
  Please post back and we do know.

• Theme 25 - items are not correctly displayed in the presentation of the grid

  Hi all

  APEX 4.2.5.00.08

  Oracle 11g Enterprise Edition

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed. I read a blog and he said to remove all the colspan which will then automatically display elements. I did, but it did not work. The form consists of several parts using a list of tabs on the page. Parts of the tab using the model 'Region without the buttons and titles' of the region. I tried to replace the template "no model", while he was a little better, it has not corrected the problem.

  I've migrated the application and objects in the db at the APEX. ORACLE.COM (it took a few hours) and I hope someone can resolve my problem until the site is upgraded to 5.0.

  Workspace: RGWORK

  Application: KIMBERLY (33925)

  Page: Vehicle details (13)

  Username: TESTER

  Password: test456

  The first screen will be a Update/View vehicles 1 choice menu

  Choose this option and a report with a single line id.

  Select this line and display page 13.

  You have Developer access but please keep me on what has been fixed. I don't want remedy you. I want to know what has been resolved as well.

  Please get back me to me as soon as POSSIBLE because the site is upgraded to 5.0 this Friday.

  Robert

  sect55 wrote:

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed.

  Why you want to switch to theme 25 instead of simply retain the theme that was used in 4.1?

  Go wrote:

  Robert,

  Look at your application. just a simple change.

  change:

  Region: Veh/equip Information

  Presentation of the grid:

  Start the new row: Yes

  That helps, but it's not the whole story, as it appears the layout is still affected by the problem described in the thread previous Theme 25 region without buttons and issuance of securities

  Applying the fix I suggested it (in 78449 application I created a copy to ensure that I was working with the initial problems) Gets the items on the same line, but I guess that's not the same as the original provision and it doesn't look very good.

  Basically, I would say either stick with the original theme or by switching to a 4.2 theme that still use the page layout based on a table (for example, 24 or 26). Theme 25 is difficult to work with and works best with presentations created especially for her from the start.

• color in CS4 are not correctly displayed since the upgrade to windows 10

  I have upgraded to Windows 10 last week and I had problems with colors does not display does not correctly in CS4. I tried to take a screenshot of exactly what I see in CS4, but when I post it online it seems fine. Telling me that something is now display properly in CS4. It also happens in LR3. When I post the photo online or look at him in the Windows Photo Viewer, it seems. I took a video of what is going on, but the quality is not so great. I apologize. Can anyone help? I have been searching the Internet for two days and can't find an answer to my problem. I went to the Intel website and there is not an updated video driver for my graphics card.

  Most likely you have a bad monitor via Windows Update profile. Manufacturer profiles are notoriously unreliable and often faulty and should always be avoided.

  This will only affect the applications of color management that actually use the profile.

  Recalibrate, or if you have a calibrator uses sRGB IEC61966 - 2.1 until you get a.

  

  Restart Photoshop when done so he can pick up the new profile at startup.

• Site does not correctly display on the Samsung Tablet

  Hi all

  I've seen a few questions about Muse sites not shown correct on a Samsung tablet. My problem is similar but even more. The site is the correct display on computer office/ipad/iphone but not on the Tablet from Samsung.

  In the previewt its is not displayed. Now, I also know that the preview more or less simulates how a site should look like.

  This is the site: www.uwpersoonlijkeoptieadviseur.nl (Dutch site).

  I looked at the links and they seem to be ok. I mean all the links link to the version of the tablet.

  see you soon,

  Larry

  Great!

  Yes, that would be a problem with browser itself that you understood.

  This can happen if the browser is not updated with the older devices.

  Thank you

  Sanjit