My pointer of the mouse/mouse usually sticks or scatters all over the window

Similar Questions

• my mouse works correctly, it moves all over the screen on its own

  It started this morning very well, then unexpectedly, he starts slowly his way around the screen that I have never had this before, I use a trackball mouse, I already tried rebooting but also tried another mouse and even tried just unpluging the mouse and pluging it back

  Have you tried to use canned Air to clean the mouse?

  Using the uninstall/reinstall driver?

  Is the mouse still under warranty?  Contact manufacturer for a replacement

  There are nearby facilities that could conflict with the mouse?  Router, cell phone, phone?

  Yet away from the system.

  Here are links to support Logitech on the same issue

  See the latest response/resolution on the first thread.

  http://forums.Logitech.com/T5/keyboards-and-keyboard-mice/erratic-mouse-behavior/m-p/325613 
  http://forums.Logitech.com/T5/mice-and-pointing-devices/erratic-MX-performance-mouse-issues/m-p/711968

  http://forums.Logitech.com/T5/mice-and-pointing-devices/anywhere-MX-cursor-moving-on-it-s-own/m-p/663284

  http://forums.Logitech.com/T5/mice-and-pointing-devices/bought-a-Logitech-MX620-wireless-laser-mouse-erratic-mouse/m-p/344362

• Shortcut pointer in the window title

  When you create a title, T is the shortcut to take you to the text tool and it is always there.

  The shortcut to take you to the pointer tool is V, but when you are in the text tool, it gets just V.

  Is it possible to use the shortcut of pointer when in the text tool?

  Thank you

  If you're entered text in the Titler, the escape key will commit your changes to the text and activate the pointer tool.

  Jeff

• access point in the window of photoshop

  Hello!

  I have photoshop CS5 and recently when I well use a hotspot White appears in the lower left area of my photoshop window - it does not appear with any other window in its vicinity, and when the photoshop window is NOT ACTIVE, it disappears, which lead me to believe that photoshop is the culprit.

  It's quite annoying, as a photographer, trying to touch up.

  Anyone have this problem?

  
  Attached are pictures of the active and inactive CS5

  

  See you soon!

  Try to disable the GPU in Photoshop (Preferences > Performance). Probably, you don't see elsewhere because these other elements are not engaging the GPU features. If this is the case, I do not know why the GPU would do it exactly, but it might have to do with some of the GPU settings in your system preferences.

• Scattered all over the hard drive downloads

  Trying to gain some control over the download process; I always put Firefox 'always ask me where to save files. For the first half of the life of FF that worked perfectly well. Save a file that is brought to the top of the corresponding dialog box, showing the location that I lasted sauvΘs and asking if I wanted to re-use that one.

  I can see how that might be a concern of privacy on a shared computer, such as the list of recently used files that comes with so many applications, but it has never been a concern for me.

  What bug the absolute $% & % $& % hell out of me is that FF now appears most goddawful of random places as suggestions. No matter hoe, I always use the same folder, FF suggests places that are literally everywhere in the hard disk without detectable rhyme or reason. I waited patiently for the development team correct everything they did to make FF cannot perform this simple operation he was quite able to reach with an apparent ease at least as far as his Phoenix days. But, alas, the output ' Let's Break everything "of the week schedule has never solved the problem.

  What gives? Someone at - it a fix for the problem? I know that there are affecting a lot of people just longer because I have heard the complaints.

  I added the Boolean preference. I wasn't sure if she would take effect without rebooting or not. Of course, I had not too long to wait... Crash-O-Matic pulled on plan and gave him the restart that he may or may not have needed.

  I used some time now and have not had the problem again. I will temporarily call this one resolved.

  Thank you, man. You can't imagine how crazy this thing driving me for how long.

• I can't put the system restore at any point, nor the desire, it set a new restore point, error box - another restore is in progress and me stops dead.

  I am running windows Vista Home Basic; 32-bit.  Norton 360 anti virus; ALSO I can not uninstall all ADOBE programs, error says cannot locate
  %AppData%, critical then an error screen after another.  I'm agree with getting rid of most of the old files and users to start all over again, windows was on the computer when I bought it. Help

  I'm glad you're running properly again!

  And have nothing to do with registry cleaners, you've discovered.

  As you say, make regular data backups, and if something bad happens, you always have to fall back on recovery.

  Thanks a lot for taking the time to answer and help others here.

  See you soon.
  Mick Murphy - Microsoft partner

• Dell pro 8 black screen sometimes venue if he wake up with the windows key

  Sometimes if I wake my Tablet pro 8 of meeting point with the windows key, I see is black screen. It seems minimal leak backlight of the screen, but a few pressing the button of windows do not display the log on screen. The Tablet is NOT turned off. If I press the power button, I always get the screen turn on with screen, connection immediately. Is this a common problem or am I unlucky? Thank you.

  Hello, I'm having this problem with my unit as well... DV8Pro will not wake up from slumber. I had to press the power button for 10 seconds to start up again. I just had for a month. Someone at - he found a solution to this? Reference dell is listening to its customers?

• Some, but not all, CC 2015 applications fail to launch the Windows 10

  System:

  Intel Core i7 - 6700K

  ASUS Z - 170 Deluxe

  32 GB OF RAM

  1.2 TB SSD

  NVIDIA GeForce GTX 980

  OS was originally Windows Update November 10, now Windows 10 anniversary (Version 1607, OS Build 14393.187)

  I have creative cloud installed my desktop PC (the above specifications) and my book of Surface. Everything works fine on the book of the Surface and they are on the same network. Initially, all the applications worked fine on my desktop but at some point along the way, most of them is launch order. Photoshop, Illustrator, and Muse would launch very well, but Lightroom 6.1.1 InDesign, bridge, Premiere Pro, After Effects, Audition, Dreamweaver and Media Encoder would do anything if try to start either in the start menu or the CC app things I tried to solve this problem:

  • Reset.
  • Check out CC on all devices, then back away from logging in.
  • Uninstalling and reinstalling the CC.
  • Off my C:\User\Username\AppData\Roaming\Adobe preferences, uninstalling CC, deleting the old prefs, CC reinstalling backup.

  Finished always with the same results. Then I out of the CC, uninstalled all applications including CC, set a Recovery Point and proceeded to remove any related Adobe (uninstalled all Adobe software, open the registry and deleted all the registry keys associated with CC). Rebooted, installed CC, same results. Was able to install the applications, but only 3 of them would launch. Disconnected CC, CC uninstalled, restored to my previous Recovery Point. Tried to install CC again at this stage, the same results. Could install apps, but most of them will not start.

  I was at this point on the Windows 10 November update so I decided to maybe switch to the update of the anniversary, he'll fix it. Thus once again signed off CC, CC uninstalled and upgraded Windows 10 for the last birthday update (Version 1607, OS Build 14393.187).

  Then I came across a new problem, I was not yet able to run the Setup program on the update of the anniversary that has been resolved here:

  Installer of creative cloud leaves early in the installation process

  Theoretically these tools I ran should have cleaned up remnants of the CC completely. Unfortunately, I had once creative cloud installed again after upgrading OS, I tried two apps problem and CC Lightroom (2015) and Dreamweaver CC (2015) does not always. (Click 'Open' in the app next CC or the other app does nothing, no window opens at all.) These two proposals used to work. (Actually I have thousands of saved photos and waiting because Lightroom does not work, even if it worked before on this computer.)

  And a simple uninstall and reinstall fixed Illustrator. OK, I'm all fixed, applications work. I hope some of this info will be useful to someone else in the future.

• Second the mouse pointer to the center of the screen of Windows 8 (office and metro) - Sony VaioT Ultrabook

  After a few updates MSFT uncontrolled or without reason, the boot of Win8 poster now the gray circle or circle with the mouse pointer in the Center on the login screen of the touch screen. Try moving the pointer with touchpad shows second pointer, and the original remains flashing in the Center. By connecting to the Metro interface, the cursor of the Center remains in the Center, and it is possible to move subway tiles by dragging the screen.

  When you go to the office, the pointer to the Center rest sometimes, sometimes disappears; When there, open and close the Task Manager without doing anything he removes the unwanted pointer. When removing the additional pointer in the Center, office does not respond to tap and double tap. and does not show the rectangle of the area of selection, as he usually did. However, the touch screen digitizer apparently works as the key, and touch multi-touch show shadows in the points of contact. It also allows to scroll the text in the browsers to slide the touch screen. But the zoom and the valves do not work.
  I also noticed that a few seconds after that the Office will appear on the screen, the touchscreen works as he used before (look and work area selection), but they stop working after 3-4 seconds and you can only take account of the points of contact and scroll the text in browsers (no resizing)...
  Device Manager displays the digitizer as 'USB input device' USB\VID_04F3 & PID_0018; It is impossible to find the name of the vendor or update the driver. The device also creates objects of device HID four children. The digitizer can be stopped and restarted from the Device Manager; upon restart, the Center pointer appears again, or a white square is displayed. Touch the place goes the arrow-shaped pointer in the gray circle of key indicator in the center of the screen. Open and close the Task Manager remove the pointer from the Center.
  Sometimes, when you move a pointer 'true' with the touchpad as the arrow in the Center pointer is replaced by a helping hand or cheek two arrows.
  It seems that there is an application or a service that loads with office and seizes 'touch down' messages, do not let them be served by gui. However, I don't find anything unusual in starting programs or services; Virus scan shows that the machine is clean.
  I thought it might be a ClassicShell likely to interfere, but removing it does not change the behavior. Neither the removal of all the utilities of the startup list startup.
  It is a software problem, suggestions, which could bring him or how to find the root cause of the problem are appreciated.
  I saw a similar description of the behavior on the forums of Sony, but there was no resolution.

  FIXED! My laptop had this problem from day one.  I found a thread where some people had fixed it by going into the properties of the mouse and two enabling paths (shortest path setting was OK and barely perceptible) or by changing the standard display cursor to enlarged (or black).  But this does NOT work for me.  Here's what worked completely:

  I turned off the touch screen.  Who needs him--it was a stupid idea of Windows 8, in any case, and the compromise to solve this question "cursor ghost" was worth WAY.

  Go to Device Manager.  Under Interface devices, there are 2 lines for input USB device.  (If there is more, temporarily disconnect the receiver wireless mouse or another USB input device).  Disable the first, one in right-clicked on it and selecting Disable.  And the problem is GONE!  I hope this helps.

  Maybe the screen had a defect that makes act like an invisible finger relying on, or more likely, it's a Windows 8 bug affecting some machines.  In any case, it's a huge relief to see it fixed, because the cell phone was horrible, when this happened.  Good luck!

• Satellite A660 - 07P problem with the pointer of the mouse using the touchpad

  I just bought my A660 07P last Thursday, September 15, 10 and I noticed that I had problems with the mouse pointer using the touchpad.

  From time to time, the cursor/pointer is locked and seems something like a button up and down.
  I assume it's because it's on a mode of waiting, but in this case as every 5 minutes.
  When it is locked, it will also change the zoom percentage when the touchpad is struck. It is very not when I'm in the middle of something and I can not move the pointer. In addition, the start is very slow.

  BTW, I have not installed any programs or applications. I'm still testing until Friday, otherwise I'll go back to where I bought it.

  Hi mate

  This isn't touchpad problem.
  I guess as support for computer laptop MULTI-TOUCH PAD
  There are a few additional features supported by touchpad, and I think that you have enabled this while using the touchpad

  The touchpad supports the features:
  _ChiralMotion_
  You can scroll vertically and horizontally

  _Pinch Zoom_
  This feature provides functionality like the scroll wheel zooming

  _Rotating (chiral spin) _
  This provides gestures to rotate the photos and other objects

  _Momentum_
  This feature provides a smooth, fast trackball as the movement of the mouse. A quick finger on the touchpad surface can move the sliders in the entire screen.

• Dragging points in the chart with the mouse

  Hello

  I would like to ask if any Graph control NOR for .net enables drag and shift the points on the graph with the mouse.

  Here's the simple example to describe what I'm thinking:

  

  If there is no such functionality, can be implemented and if it cannot, in such a way?

  a.h.

  Hello

  It seems that you may be heading in a different direction, but I thought I would offer my 2 cents.  One possibility would be to update the point in the data table based on the position of the mouse in the MouseMove callback and replot then data.  Although it may not fully satisfy all your needs, below is a simple example of how to proceed.  If all goes well, it may be of some use to you.

  partial class Form1: Form
  {
  xData private Double [] = {2, 4, 7, 8, 5, 4, 2};
  Private Double [] yData = {5, 8, 9, 6, 3, 2, 5};

  private int pointIndex;

  public Form1()
  {
  InitializeComponent();
  }

  private void Form1_Load (object sender, EventArgs e)
  {
  scatterGraph1.PlotXY (xData, yData);
  }

  Private Sub scatterGraph1_MouseDown (ByVal sender As Object, MouseEventArgs e)
  {
  xPoint double;
  Double yPoint;

  scatterPlot1.InverseMapDataPoint (scatterGraph1.Bounds, Object, out xPoint, out yPoint);
  This XYCursor is transparent in color and it is
  SnapMode has the NearestPoint value
  xyCursor1.MoveCursor (xPoint, yPoint);
  Cursor.Current = Cursors.Hand;
  }

  private void scatterGraph1_AfterMoveCursor (object sender, NationalInstruments.UI.AfterMoveXYCursorEventArgs e)
  {
  pointIndex = xyCursor1.GetCurrentIndex ();
  }

  Private Sub scatterGraph1_MouseMove (ByVal sender As Object, MouseEventArgs e)
  {
  xPoint double;
  Double yPoint;

  If (get_Cursor is Cursors.Hand)
  {
  scatterPlot1.InverseMapDataPoint (scatterGraph1.Bounds, Object, out xPoint, out yPoint);
  xData [pointIndex] = xPoint;
  yData [pointIndex] = yPoint;
  scatterGraph1.PlotXY (xData, yData);
  }
  }

  Private Sub scatterGraph1_MouseUp (ByVal sender As Object, MouseEventArgs e)
  {
  Cursor.Current = Cursors.Default;
  }
  }

  NickB

  National Instruments

• Why my mouse pointer on the screen?

  When I went through my mouse pointer on the screen,

  away from what I do during the video, I am running Windows XP

  w/office

  You are using a laptop with a touchpad? If so, I guess you hit during the navigation. You have not provided all the details, so it's a bit difficult help.

• Screen goes black and only the mouse pointer visible to the windows xp screen

  My computer has used to work without problems.  Now, when I start it upward, to the Windows XP start screen, the screen turns off and all that is visible is the mouse pointer.  I tried to start safe mode, and it does give me even the option - not even if I press F8 at startup upward.  What is the problem with my computer and what can do?

  Thanks for your answers, Dena and Jojih.

  The screen went black and all I could see was the mouse pointer.  There is no ameioration or changes on the hardware of all kinds.  I wonder if one of my employees has a virus on the computer.  I could not do in safe mode, even if I tried to press F8.  If I put in the Windows XP CD, the screen would go black after that he loaded the system files, just like at the start of Windows XP.  So I used Acronis PC Backup and Recovery and make a recovery disc and used to reformat the hard drive and then I reinstalled Windows XP.  Everything has been great to work for.

• How to manually or programmatically set the pointer speed to mouse to a value exceeding the threshold available in Control Panel?

  I have a disability that limited my range of motion. The maximum setting in the control panel to the speed of the mouse pointer is not enough for me, especially on the horizontal axis. Is it possible to manually adjust this setting beyond what is available in the control panel? A registry setting? A call to the Windows API? Please notify.

  In the registry, go to:

  HKEY_CURRENT_USER\Control Panel\Mouse

  Set the key: MouseSensitivity

  Range of values set via the GUI is: 1 to 20

  You can try to set the value above 20 (the highest speed set via the GUI).

  I tried to change the values in the registry, however since the driver does not reload the values I don't know how do to cause the changes to take effect.

  Since you mentioned the API call, here are a few discussions deep in to the mouclass.sys (file of class system, Microsoft HID-compliant mouse):
  http://www.eggheadcafe.com/forumarchives/win32programmerkernel/Nov2005/post24565529.asp

• Start Windows vista, nothing on the screen, only the pointer of the mouse

  I have a gateway desktop vista, nothing on the screen, only the pointer of the mouse
  I used the recovery tools nothing fixs

  Hello

  "I used the recovery tools nothing fixs.

  It helps us if you tell us what they were.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If necessary, here's how to reinstall back to new condition.

  "Gateway Recovery Center in Windows Vista® '

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read these options to the gateway address:

  Gateway System Recovery from the hard - the following are methods to recover or repair the computer using the recovery of hard drive partition.

  • Complete recovery plant
  • Restoration with automatic data backup
  • Windows recovery environment

  See you soon.