my printer does not print black printer model # 6500 has +.

Similar Questions

• The double-sided printing functionality does not work on my Officejet 6500 has more.

  Initially, it worked, but now it doesn't.

  Please read this post then provide some details.  What printer model? What operating system? You may need to enable the duplex module, as described in the Duplex printing Vista/Windows 7 Guide.

• Analysis application does not work for HP Officejet 6500 has more.

  My OS is Windows Vista 64-bit. Image of Windows service is not running. I followed the steps to start the dependency services. Still will not start. Error message 1068.     Any suggestions?

  Hello FixN

  Try the following steps to ensure that all services are running. RPC end point mapper may not show it seems have found under Windows 7 but not Vista. You are using Vista as the original poster?

  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
   
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake.
   
  Check the dependencies or sous-dependances:
   
  Right-click WIA (Windows Image Acquisition) by selecting the first properties, and then click the Dependencies tab. It should list: remote procedure call and detection of Harward Shell
   
  Under the CPP he then list Launcher process for the Service DCOM and RPC Endpoint Mapper to go back to the main list services.msc and then right click, will launch all the items listed as dependencies or void dependencies under WIA

• Library assets created in illustrator cc. But it does not appear in the model

  Are one-way unique active library? Those created on adobe mobile apps (draw, shape, comp) appear in desktop applications. But not the external manner around? I created a graphic library asset in illustrator cc. But although the new name for the library, I created showed upward in the model, the graph or the good does not. Appreciate any help on this.

  Library assets are certainly a reciprocity. Check out this thread: Active library created in illustrator cc does not appear in the model of adobe

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• Satellite L850D does not start - black screen

  Ok.. My wife L850D had problems with black screening started upward after the toshiba screen.

  I ran a few different utilities, including a reset... it all started about 3 weeks after the victory 8.1 upgrade.

  Rang technical support who kindly informed that because we put 8.1 on that he cancelled the guarantee. (btw nice guy)
  Then refused to help.

  And went and reloaded Win 8 of my happens, just to see if it was a problem of hardware, software.
  (yes I know, but it must have been only temp).

  It starts fine, sitting there for centuries without problem.
  It wasn't until I downloaded the drivers toshiba, (Yes the good) did a reboot and hey presto. black screen again.

  A little, this would imply that there is a problem with the drivers of toshiba?

  OK so the wife decided screw it, put Win 7 on it.
  Restarted with disk in. sat and sat. Google finally informed me that I had to disable secureboot and put uefi in the csm.

  OK fine, went into the bios, off course start, changed to the csm uefi and restart the computer.
  Now I get nothing; screen all turns on, fan starts, cd rom shots on and nothing stops down immediately if I push the power button.

  I pulled the battery, external and internal, let rest for half an hour and still the same thing.

  Any ideas?

  The history is for me a little confused so let me start from the beginning with some basic stuff.
  In your ad write you didn t what model do you have exactly (L850D-xxx) and I can't check the specs of the laptop but I presume that this laptop comes with preinstalled OS, probably Win8.
  Laptop with factory preinstalled OS that includes all the necessary drivers and tools and utilities. One of them is Toshiba Recovery Media Creator. With this tool, you can create a recovery (DVD or USB) media and it lets reinstall the original OS if it s some problem and HDD recovery does not work.
  Best option now would be to use these media and install original recovery image. Did you create this recovery media?

  Generally speaking when you new notebook you do not have to use the original OS. You can install anything you want, and it has nothing to do with security. You can install any OS, all supported operating systems. So I do not understand how you could get info from technical support.

  In any case, try please connect your laptop to the power supply and restart laptop. What exactly happens? See Toshiba welcome screen? Try pressing F12 repeatedly. There any reaction?

• Tecra A11-128 does not start - black monitor, only the fan is on

  My laptop starts to boot, a few seconds later, the fan runs all the time and at full power. Here the detailed steps:
  -Push the Start button (battery led is green)
  -the hhd led is green for a short time, then off
  -l' screen is black all the time
  -After a few seconds, the fan starts at full power
  -That deer situation change either, I must break with 5s on the Start button

  I tried several keys (Fn + F2, ESC, F5) while starting up, as an external monitor. Nothing has changed.

  Who has an idea? Thank you very much for your help!

  Hello

  If the start of the BIOS (or Toshiba) screen does not appear, it means that a serious motherboard hardware problem can cause this RAM modules or malfunctioning CPU would be possible
  Recommends checking the memory RAM and CPU modules
  The RAM modules could be replaced easily but it of difficult to replace the CPU and test it. Therefore, it would be a job for a technicians for laptop

• Tecra S1 - does not boot, black screen

  When I turn on my Tecra S1, fan starts, dvd starts up but screen stays black and hd light does not illuminate. If I press F8 or F12, or sometimes even if I do not support what it is, I've heard three beeps. I disconnected the battery, HD and RAM, but it seems that the same thing.

  What can I do to detect and debug the problem? Thank you

  Hey Buddy,

  I found and interesting article on the Web from Toshiba site:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  Overall this beep code means that a hardware malfunction has been detected. An ASP in your country can tell you what the problem is.

• Satellite Pro A300: Win 7 Upgrade DVD does not list my laptop model

  I bought a Satellite Pro A300 that came with Windows Vista pre-installed on it. I was offered a Windows 7 Uprgrade for 30 by Toshiba that I bought and got 2 discs:

  (1) Windows 7 Upgrade disc
  (2) Toshiba Win7 Drivers Upgrade drive

  I have updated successfully however the drivers Toshiba disk does not list my model of laptop. I tried to install the drivers on the disk for the OEM software such as drivers of web cam (which are not available online), but they do not work. Also now my DVD player does not open and I can't view the contents of the disc?

  Can someone advise who I come into contact with to get a drive for my laptop model?

  Hello

  What model of laptop do you have?

  Have you tried to choose another model instead of your laptop model?
  Do this!

  I read about a similar question here in the forum and the user could solve this choose another laptop model number.

  By the way; all Win7 drivers can be downloaded from the page of European driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com

  See you soon

• Satellite M60-170 does not start - black screen

  I have toshiba M60-170, before it was perfect, but now I don't know what is happening?
  When I try to start my computer just for 2 sec, everything is good, then the fan of sounds of the CPU and the screen is black and the stop of HARD drive.
  So everything is stop!
  I try to start again but still does not.

  Some body told me that it is the motherboard!
  Please, someone tell me what is happens with my beautiful laptop?

  Thank you

  It does not sound good friend :(

  But let's try this; Remove the battery and unplug the power adapter for about 20 min.
  After this short period of time connect the two parts, and try to start Notepad.

  If it doesn t help the chances are that your hardware is defective. Like other guys said, it could be a fault of the motherboard or something different like CPU, memory modules.
  I can speculate on failure.

  I think that you don't have many choices. In your case, you should contact the ASP in your country for a control of the laptop.

  Good bye

• Wireless does not work - Satellite A300 model PSAGCA

  Hello

  My built-in wireless does not work on my laptop. I called the customer service line, his fees to fix the problem but to no avail. Now, I have to use the wireless adapter to use internet which is not the way I wanted to. Can someone help me please how to do my job with built-in wireless?

  Thank you

  adoolan

  + The message was edited: model number added to the object.

  Hello

  Please tell us which laptop model you have and what operating system is preinstalled.

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Extend the display does not - second black monitor

  I have a laptop Toshiba Satellite C655 and I connected a 2nd monitor in order to have two screens to work on.  The screen resolution is set to the optimum level for each monitor, I chose the option "Extend these screens" and each monitor is set to a different refresh rate.  However, the second monitor stays black.  If I click on "Identify", a number 1 appears on the screen of the computer, but nothing appears on the external monitor.  Even the mouse cursor does not appear when low-pressure on this screen. I checked for updated drivers, but Windows says I already installed the best drivers.

  If I go to "Duplicate the poster", the external monitor displays the desktop and the laptop screen is black.   I don't understand.  It was working fine yesterday, but today when I turned on, I'll have these problems.  I even tried plugging an external monitor that is completely different with the same results. Any help would be appreciated.

  I have a laptop Toshiba Satellite C655 and I connected a 2nd monitor in order to have two screens to work on.  The screen resolution is set to the optimum level for each monitor, I chose the option "Extend these screens" and each monitor is set to a different refresh rate.  However, the second monitor stays black.  If I click on "Identify", a number 1 appears on the screen of the computer, but nothing appears on the external monitor.  Even the mouse cursor does not appear when low-pressure on this screen. I checked for updated drivers, but Windows says I already installed the best drivers.

  If I go to "Duplicate the poster", the external monitor displays the desktop and the laptop screen is black.   I don't understand.  It was working fine yesterday, but today when I turned on, I'll have these problems.  I even tried plugging an external monitor that is completely different with the same results. Any help would be appreciated.

  Download (and install) the latest driver for all video player is installed in this laptop specific.  The manufacturer - not Microsoft.

• Active library created in illustrator cc does not appear in the model of adobe

  Are one-way unique active library? Those created on adobe mobile apps (draw, shape, comp) appear in desktop applications. But not the external manner around? I created a graphic library asset in illustrator cc. But although the new name for the library, I created showed upward in the model, the graph or the good does not. Appreciate any help on this.

  It works for me. I made a new document of comp. I chose the icon of chart (top-right). In the column of import of the expert group who opened, clicked on my files. He showed me the files that I had stored in my CC account. He showed two files HAVE that I had downloaded. I already have one and you click Open. He was placed in my layout.

  Good luck.