Satellite M60-170 does not start - black screen

Similar Questions

• Satellite C855D-124 does not start - black screen

  Hello

  I have a problem on my PC (by Satellite C855D-124) specifically was playing a game, and stopped from nowhere I could not do any command then off button.

  But as I returned the call and turned the lights appeared as the charge appears as a small light and also appears on your but then nothing appeared on the monitor, no warning or error message...

  Then it connects but does not seem to do anything and I would like to know if you can help with advice on what happened and what I do or what I can do...

  Sorry for the mistakes but I do on google translator...

  Hello Adrian

  For me it is not easy to understand your problem, but what you can do right now is to restart your laptop and check if the basic operations are working properly. Try restarting several times to see what will happen.

  Start the laptop computer can see you Toshiba welcome screen?
  Is there a usual activity of HARD disk at startup?

• M17x R1 does not start - black screen - fan turns, turns on the keyboard, nothing on the screen.

  Hi all

  Newbie here and desperate.

  I have a problem with M17x my son this morning. Everything worked very well and after some time, turned off the machine it self.  Now it does not start even - at least I think, it won't because there is nothing on the screen as it is empty.

  I've tried several things, including trying to move on and outside, with or without a battery of the power cord.

  I'm at a loss as to what could have happened.

  Help, please.

  Smakwam.

  The gpu of cooking is very easy in fact, that you have designated your oven to about 275 degrees cover a cookie sheet with paper and configure the map out of it by winding 4 balls of aluminum foil and their definition on each corner of the map. you never want to have it put all directly on the sheet. do Cook for about 10 minutes then cool before coming back into the laptop. Always be sure to remove all of the components and the radiator and any residue of thermal paste. After sick cooking you need to reapply a fresh thermal paste. I use artic silver 5. It is has more detailed instructions on this online, as well as photos. You want to make sure it's your video card before you do it just to be sure. I just had to do it again last week, works like a charm for me every time.

• Satellite L850D does not start - black screen

  Ok.. My wife L850D had problems with black screening started upward after the toshiba screen.

  I ran a few different utilities, including a reset... it all started about 3 weeks after the victory 8.1 upgrade.

  Rang technical support who kindly informed that because we put 8.1 on that he cancelled the guarantee. (btw nice guy)
  Then refused to help.

  And went and reloaded Win 8 of my happens, just to see if it was a problem of hardware, software.
  (yes I know, but it must have been only temp).

  It starts fine, sitting there for centuries without problem.
  It wasn't until I downloaded the drivers toshiba, (Yes the good) did a reboot and hey presto. black screen again.

  A little, this would imply that there is a problem with the drivers of toshiba?

  OK so the wife decided screw it, put Win 7 on it.
  Restarted with disk in. sat and sat. Google finally informed me that I had to disable secureboot and put uefi in the csm.

  OK fine, went into the bios, off course start, changed to the csm uefi and restart the computer.
  Now I get nothing; screen all turns on, fan starts, cd rom shots on and nothing stops down immediately if I push the power button.

  I pulled the battery, external and internal, let rest for half an hour and still the same thing.

  Any ideas?

  The history is for me a little confused so let me start from the beginning with some basic stuff.
  In your ad write you didn t what model do you have exactly (L850D-xxx) and I can't check the specs of the laptop but I presume that this laptop comes with preinstalled OS, probably Win8.
  Laptop with factory preinstalled OS that includes all the necessary drivers and tools and utilities. One of them is Toshiba Recovery Media Creator. With this tool, you can create a recovery (DVD or USB) media and it lets reinstall the original OS if it s some problem and HDD recovery does not work.
  Best option now would be to use these media and install original recovery image. Did you create this recovery media?

  Generally speaking when you new notebook you do not have to use the original OS. You can install anything you want, and it has nothing to do with security. You can install any OS, all supported operating systems. So I do not understand how you could get info from technical support.

  In any case, try please connect your laptop to the power supply and restart laptop. What exactly happens? See Toshiba welcome screen? Try pressing F12 repeatedly. There any reaction?

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• Satellite L305D-S5934 does not start - white screen

  I have a problem with a 2 years satellite l305d-s5934.

  In turning on, the power light turns on, but the hard drive light does not work and the screen remains blank.
  I tried removing the battery and reboot without it after pressing the power button, but nothing changes.

  Any advice on fixing the problem would be welcome.

  Thank you

  Hello

  Remove the battery, disconnect the power adapter and leave the laptop disconnected for a longer period of time. After that connect the two parties can try unit lights up once more

  If it does not, check the RAM. Remove the single module and test two slots with each module.
  Sure, it might be possible that the two modules are faulty and that the procedure could not help you.

  In the worst case the motherboard may be affected in one such case that mobo replacement would be useful.

• Satellite Pro C660 does not start, no screen

  Hi guys I was wonder if anyone could help please.

  I have a Toshiba laptop Satellite Pro C660 - 2 DR who seems to be defective (just out of warranty).
  Everything worked fine until we came to a morning market and found that the screen remains off (black screen). There are no output through the VGA as I tested it on an external monitor.

  The CPU fan turns for a few seconds and then turns off.
  There is no noise from the hard drive read/write either. The power light stays on. I removed the hard drive to access data on another system that worked Fortunately

  . I also removed the RAM, battery and optical drive, but there is still no output to the screen.

  Is it sounds like a faulty motherboard?
  The laptop seems to be in excellent condition.

  Is there something else I can try please? I would be very grateful for any advice.

  Rich

  Yes, it looks like the faulty motherboard or a part of the motherboard as RAM or CPU.
  You said that you have already removed the RAM, but have you used a good RAM module tested?

  Theoretically, it could be just a problem of RAM but in the worst case, you will need to replace the motherboard and I think it would be really expensive repair.

• HP 255 G2 does not start-> black screen (my fault)

  Here's the situation:

  Purchased a HP 255 G2 (windows 8.1) to be used with Linux Mint.

  I know that I have to enable the legacy mode in the BIOS and disable secure boot. I forgot the last part (disable startup secure).

  Now I can't do anything with the laptop, it does not meet the ESC or F10 to enter the BIOS to correct my error.

  I also have a USB stick with flash of the BIOS, but it does not boot from the USB key to reflash the BIOS.

  Does anyone have a clue as to what I can do next? Picked up by HP for repair?

  Hi Fd1sk,

  Your HP 255 G2 is a commercial product and get your question more exposure, I would say post in the trade forums. Here is a link to the forum Commercial Notebook.

• MY ACER INSPIRE 5820TG does not start black screen?

  Hi all

  It will not start, seems a connection lost the Start button.

  Ant the solution or similar problems?

  Sincerely, Kenneth

  Hello

  Could you give me more details?

• Satellite M60-182 does not start on AC supply

  After press the "button" is about 5 sec blue lighting and computer is turn off. But I can run on battery power. The computer and is now operating normally. I don't know what the problem is? Please someone help me.
  Answer might be in Polish.

  Have you tried that?

  Unplug the AC adapter, remove the battery and wait up to 1 hour.
  Connect the AC adapter and the battery, and then try again.

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite A100-233 does not start Win XP

  Hello

  When I was working on my A100-233 it suddenly hung up, only the touchpad worked. I try Ctrl Alt Del, but no use. After that the laptop start peeping (a long peep) until I stopped it by power.
  When I restart, the windows did not start (black screen) even in safe mode (it listed some files and stop there).

  Finally, I tried to re - install windows by its restore CD. Stop the CD after loading and display 'pleas wait. "
  Also, I try to start MS-DOS form ok. But there is no hard drive (C: D: E :) nothing.)

  But the BIOS recognizes the hard drive, when I connect my hard drive to a USB port on a different computer, it worked, I saw all the data.

  So what happens on my laptop.

  So in my opinion there would be something wrong with the hardware.
  Maybe it's something wrong with the HARD drive partition table or the memory as you know it is always difficult to say what might be wrong s s.

  As San Remo said an attempt to set the BIOS default settings and check if the HARD drive is correctly recognized.
  Then format the drive HARD integer (delete all partitions) and try to reinstall Win OS.
  In your case, I will try to reinstall the operating system from the original CD of MS Windows XP too.

  If you fail the pieces of unique equipment as the RAM and the HARD drive must be verified.

  Good luck