My printer squeeks when the impression as if it needs lubrication. Caan do some lubricating it myself?

Similar Questions

• How to print photos when the display screen is white? The image is missing in it.

  How to print photos when the display screen is blank?  It shows only a white screen empty when I select the photo and press on print.

  You click on a film image in the print module? And, I guess you don't have to go to the Print module, right?  Additionally, make sure that you have chosen to make a custom package.  If you chose the custom package you need to drag and drop images and organize them.

• How is to send the native port of the printer command, when the printer is set as the default printer?

  I installed on a Windows XP printer and set it as default printer.

  I also have the manual provided by the manufacturer of printers, which defines the

  commands that can be sent over the serial port, then the status of the printer

  is extracted.

  Thus, for example, by sending an order consisted of 3 bytes: 34,56,78 to the printer (COM5) COM port

  I can get an answer advising me on the State of the printer.

  However, when you send this command to COM5, I get the following exception:

  "The given port name does not start with COM/com or is not resolved to a valid serial port. Parameter name: portName. »

  for which the printer vendor insisted on request microsoft support center.

  The port name of the printer is properly set to the correct a (COM5).

  Any ideas?

  Hello

  Your Windows 7 is better suited for the IT Pro TechNet public.

  You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Photosmart C5180 - printing stops when the any ink cartridges run dry - what is happening with this?

  My C5180 does not print anything, apparently because the cartridge Light Magenta Ink. I have given levels of gray, black ink only, but it persists in telling me to replace the color cartridge. Can it be good? Is it really necessary to buy a new cartridge in order to use the printer printing black ink?

  Thank you.

  Insert the printer installation CD in your cd and cancel any window of installation. then type "X:\util\ccc\uninstall_L2.bat" in the run window (replace "X" with the drive letter of the CD drive the CD instalalion is located in..). you will get a black command prompt window that will feature instructions. Follow the instructions carefully. Once installation is complete, it can ask you to reboot, then do it.
  
  then start the installation once more. 's done it, you shouldn't face this problem.

• The printer message ' load paper in the printer "appears when the paper is still in the status bar.

  I rebooted the paper in the tray several times, and the message still appears. I have tried rebooting printer several times and the message to load paper continue to appear.

  jmtbat

  Please read this post then provide some details.  What printer model?

• Dialog box print short when the new printer synchronized via CS5 how do you get the options the printer?

  I recently purchase a new printer - the Epson SureColor P800 and trying to set up my preferences to print found the print setting dialog box is abbreviated. It is no longer a printer asking drop to disable color management.  Instead, there is a box of media and quality. I can't disengage from the printer color management to get the proper color balance. Help! I tried to update my CS5 and also run into snags is that related?

  Hi RuthC,

  Could you please attach a screenshot of the print window.

  Also what operating system you are working on Windows or MAC?

  Kind regards

  Tanuj

• Printing error when you print from the Internet only - HP LaserJet 1022

  HP LaserJet 1022

  Windows 7

  Error message when the impression from the Internet:

  An error has occurred in the script on this page.

  Line: 2126

  Char: 1

  Error: Unexpected call to method or property access

  Code: 0

  URL res://ieframe.cll/preview.js

  What should I do to fix this?   Help!

  You need to just uninstall and reinstall the software and drivers for the printer.

  They may have been corrupted.

• HP F4400, prints the last print issue when put to sleep

  Just had a weird problem start.   My wife was going to print something and haven't noticed any paper in the printer, so it wouldn't print.  When the paper loaded and only handed over running it printed fine.  But now, whenever I put my iMac to sleep, in a minute or two, it will print another copy of the final printed piece.  It happens every time he is put to sleep.   Strange... that is clear... any idea?

  Thank you

  Looks that work would fit in the heart of the printing system called CUPS then try a reset of the print system. Open Printers and scanners, mouse over the list of printers and right-click (or hold down the Ctrl key, and then if the right click disabled). A context menu will appear. Select Reset and authenticate when prompted. Note that this deletes all printers printers & Scanners, but not pilots supported, so you will just need to add printers again.

• When you try to scan, print says "configure the pc to start scan. using mac.

  When you try to scan on PIXMA MG5722 I get the message 'set the PC to start scan.  I can scan marketing PC but no printer.  With the help of iMac.  Need to scan documents on the printer using the printer scan button.  How can I fix it?

  Hello.

  According to the version of Mac OS x that is on your computer, you may need to scan using the software on your Mac.

  If you use OS 10.11, please scan from the Scan IJ utility instead.  This program are in the Canon Utilities folder in Applications.

  If you need additional help in this issue, find more help contact us.

• Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.

  Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.

  I need help please

  If it is printed in white on white paper how you see it?

  Check your printers settings in his program in place.

• Printer does not print to restart the computer

  My LasterJet Pro 400 M401dn (new) print only when the computer is restarted. I changed the USB cables, USB ports, turn off sleep on my Toshiba laptop utility. I use Windows 7. Other previously directly attached printers worked fine.

  Within 4-5 minutes to restart, I am unable to print. When I restart the documents in the print queue to print very well.

  Any help would be appreciated!

  Julie

  Hey JAGSM,

  Which driver you use with the printer?  Have you installed the driver full features here?

  Or

  Have you installed the driver of the UPD on the same page?

  I would try this printer uninstallation and reinstallation.  Try the full functionality and UPD to see if it is a driver compatibility problem that leads to this problem.

• Low-frequency shaking sound when the backlight is disabled

  Very starnge.  It only happens for some MP3 song, and when the backlight turns off, I hear that very clearly some low-frequency (about 3-4 Hz) sound poping out.  Once I press a button and the backlight was on, pop vanish.

  Yes, after changing the EQ for 'Rock' to 'Normal', the problem is resolved.  I don't even have to use "custom" for the equalizer.  This problem makes me very carefully listern for the background music/noise.

• [ADF, JDev12.1.3] Call ExecuteWithParams operations programmatically when the page is loaded. How...?

  Hallo,

  in a working group, I have a 'readonly' page that uses in many istances VO (for fields, tables,...).

  When the page is loaded, I need to call its ExecuteWithParams operation for each VO.

  I would drag / drop (cascading) the operation of each VO ExecuteWithParams in the workflow, but the problem is that I need to run logic to call.

  For example, I have some cases in which I have to exec VO, and then pass the value of a field in the returned to the VO ExecuteWithParams, another record.

  I guess I can't manage this 'declarative' in the taskflow but I use code in a managed bean.

  So far, I've added for each VO ExecuteWithParams action page links.

  I know I can use a code like this to call the ExecuteWithParams for each VO...

  OperationBinding operationBinding = BindingsUtils.getBindings().getOperationBinding("ExecuteWithParamsToCall");
  operationBinding.getParamsMap().putAll(paramsMap);
  Object result = operationBinding.execute();
  if (!operationBinding.getErrors().isEmpty()) {
    return false;
    }
  

  ... but the problem is... where and when I call?

  I wrote in the managed bean extended view a public function initPage() tha called the ExecuteWithParams.

  How to use this function?

  I can use it during the lazy fo page load?

  Can I use it as a method call to place in the working group before the page? I have to admit that I already tried that way, but it did not work...

  In addition, after calling a VO ExecuteWithParams, as I said before, I may have the need to treat the VO after his execution to gather values for some fields (I'll pass these values to the other VO ExecuteWithParams).

  Can I access the iterator from the bean by using the iterator binding?

  Thank you very much

  Federico

  Instead, I have to create it in the the methodCall1 pageDef?

  Yes

  And if methodCall1 calls - as in my case - the function of a bean that uses the ExecuteWithParams many istances VO... I create all the necessary links in the methodCall1 pageDef?

  Yes

  And Yes... Links ExecuteWithParams that I created in the page untitled1 aren't necessary?

  Once again Yes (except if you do not have to invoke to untitled1 page)

  If you have 2 minutes trying to download the app, so you'll have is that I was

  I have more than 2 minutes (I hope), but I did not immediately jdev

  Dario

• Generate random numbers when the pdf file is opened

  I tried to write a script that generates a random 12-digit number when the PDF opens.  I need the number appears in a certain read only field on the pdf file.  I tried write the script in the script of the document and have failed.  (The number random and another part of the document will be used to extract information from it at a later date.)  Can someone help me with a script so that I can make this possible?

  Do you want a new random number whenever the file is opened? If Yes, enter

  Copy the following code as a script at the level of the document (not inside a function!):

  this.getField("fieldname").value =.

  Math.Floor (Math.Random () * Math.Pow (10,12));

• My default size for printing the letter, but it retains the impression as if a parameter is set to 8X6.75. How can I fix it?

  Firefox has recently updated to 40.0.2. Just back from a week off the coast of the work to discover, it was the incorrect impression. The printer is said to add 8X6.75 paper to print. Firefox settings are defined on 11X8.5 and all other browsers are printing very well.

  If Firefox does not use the entire sheet of paper, it can result from after having extracted Windows incorrect paper size settings when reading data from the print driver. Compensation it may involve conclusions some mask parameters, but here goes:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) for each parameter of the problem printer, right click and reset The fastest way is to click with the mouse and press the r key on the keyboard with your other hand.

  Note: In a few other discussions involving printers Brother, printer_printer_name.print_paper_data preference has been set to 256 and when the user changed it to 1 that solved the problem of paper size. If you see a 256 here, you can change the value by double-clicking it or by using the right click > modify.

  Any improvement?