My private things going to be on TV?

Similar Questions

• I bought Adobe CC through my University, but once I started to install update 2015 yesterday, he said that I only had trials for programs like After Effects and Speedgrade. I am unable to redeem a subscription, because it was a unique thing going

  I bought Adobe CC through my University, but once I started to install update 2015 yesterday, he said that I only had trials for programs like After Effects and Speedgrade. I am unable to redeem a subscription, because it was a continuous single thing of educational personnel. What should I do?

  Thank you for your help. I spoke with one of your customer service representatives, and the question seems to have been based on accounts. I think it is resolved.

• Qosmio X 500-116 - goes into a deep sleep

  I had the computer above since February 2010, and over the years, I had a lot of problems. I was brought not to use it as whenever he gives me problems.

  Today, I thought I would try to see if I can find a solution. I turned on after charging the battery for about an hour and it started in about a minute, not bad. I've updated my Norton Internet Security, it's over and I checked my emails incoming and sorted. I left it for about 10 minutes (had a cup of coffee). my back, the screen was blank and I can't get the screen lights up at all. Happening almost6 whenever I try to use this computer.

  Was the only one to get things going is to press the Start button until the laptop stops. Press the button to start it, she, then crosses all loading windows files once I selected "Safe Mode" I tried all the suggestion of options and never led. If I simply select Restart things return to normal. I can connect and everything seems ok. and I can do what ever I need to do t.

  I try to keep active, if I leave it at any moment that it goes back in the fatal sleep.

  I ran Norton "Scan now" on the two hard disks, no problems found.

  There are a few times, I saw a strange color screen (multicolor), not what I would describe as a blurry screen. I wondered if it might be a graphics card problem, maybe not.

  Any suggestions?

  Hello

  It is quite difficult to understand why this happen. You wrote about the deep sleep. How to understand this?
  Deep sleep is for me the status of hibernation, but if I understand you just your laptop is on but just your view is DISABLED. Can you confirm this?

  Have you tried to change the options for standby power, hibernation or even show OFF?
  Check out all the options and set it to "never."

  What happens when you do this? The same reaction after 10 minutes again?

• Hi I have this weird thing of using windows vista...

  Hi, I'm using windows Vista Home Basic... I this weird thing going where I always pass Administrator hidden account... I noe you guys will advise me to use the personal account and leave the hidden only admin... but I can't get this thing out of my head... in which windows vista just had me going crazy! Please help me! If only I can remove this hidden admin, then I can use this windows peacefully...

  -The two password protected

  -The two frequently used account

  -Just can't make up my mind which one to use at all times! Help!

  -Admin but hidden, I like to use, but sometimes I use the personal account, cause my gut always say "it just doesn't feel right not using Windows!

  -Ahhhhh! Help me!!! or do I just uninstall Windows Vista lol... you guys will think I'm crazy, but I think I'M SUFFEREING OF THIS STUFF! In addition, all my personal files are there...

  In addition, I used to change my computer name, and the owner under license of this Windows Vista a lot... I use DO NOT do this in my previous time to use Windows, but when I used THIS Windows Vista, it felt weird... ahhhhh... help me...

  Hello

  Best thing is to leave it alone on which the Muz and administrator.

  Create a MuzTest use to test and fix - make ADMIN

  ==================================

  If you want to create a new ADMIN account and migrate to it - perhaps name the Muzz.

  Fix a corrupted - user profile it also tells you how to migrate from an old account to a new
  HOWEVER do not remove or decrease the account Muz.
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Once you have migrated and connected in the Muzz (that you have migrated to) and in-depth
  tested - then remove the password of Muz and Rename administrator and disable it
  for use only in an emergency.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  ===================================

  Personally, I keep several unused ADMIN accounts that I never use except for test and difficulty.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Access to app store is corrupt after - Capitan (10.11.4) updated - level

  Hello, two days ago, I upgraded from - Mountain Lion - in-El Capitan (10.11.4)-, all right, except weird things going on with the app store, because it connects when it wants to, but the minute I want to upgrade the applications that need to be updated it asks me again the password and then says - it can not connect-. I look at others and followed by the option of disorder - Keyring - none of my certificates have expired, etc...,

  I have an Imac (21.5 inch) from the end of 2013. Help, please. Thank you so much in advance.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Beginner needs help with SimpleReadWrite

  After reviewing the NI-488.2\Examples\DotNet3.5\SimpleReadWrite\vb (which works fine) in "step" mode I can not yet discover the command which

  sends information on the device string. If I declare: BoardID As String = "0" Dim, Dim PrimaryAddress As String = "13", Dim SecondaryAddress As String =

  '0', Command1 dim As String = "* IDN?" what comes after?. Is this the right approach? What else do I need to know, and where and how I can find it?

  You did not add the assemblies to your project references list, as I have indicated in my note at the end of my answer lat. This is done through the project-> add a reference... menu item. Be sure to select the assemblies that are located in the folder of VS2008, where you have installed the support for multiple versions of .NET. This is distinct from the required Imports instructions. The Imports statement allows to simply do not have to write the full name of the class. So, having a NationalInstruments.NI4882 import you can declare a variable as

  GpibDevice private as a device

  instead of the full name

  Private GpibDevice As NationalInstruments.NI4882.Device

  What about the ReplaceCommonEscapeSequences error, well, you actually have this function in your form. This copy of the SimpleReadWrite example function.

  You should check that your device is expected for the command. Require a carriage return after the order? Require a line break? If so, you must change the definition of Cmd1 to include these characters, as is done in the SimpleReadWrite example.

  TesTech wrote:

  I will surely find a tutorial or take a book to learn more about VB.NET, as soon as I can get this thing going.

  It's just to make life 100 x harder for you. The above errors would have been clear, if you knew how to program in VB.NET.

• Must be signed with the RIM Runtime Code Signing Key (RRT) - example of code bar

  Hi, when I try to start the bardcode example in my device (9780 Smartphone), I get

  "Error starting BarCodeApp: Module 'BarCodeApp' must be signed with the RIM Code Signing Key (RRT) DURATION.

  The only class I have in my project is:

  import java.util.Hashtable;
  import java.util.Vector;
  
  import net.rim.blackberry.api.browser.Browser;
  import net.rim.blackberry.api.browser.BrowserSession;
  import net.rim.device.api.barcodelib.BarcodeBitmap;
  import net.rim.device.api.barcodelib.BarcodeDecoder;
  import net.rim.device.api.barcodelib.BarcodeDecoderListener;
  import net.rim.device.api.barcodelib.BarcodeScanner;
  import net.rim.device.api.command.Command;
  import net.rim.device.api.command.CommandHandler;
  import net.rim.device.api.command.ReadOnlyCommandMetadata;
  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.system.KeyListener;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.Keypad;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.XYEdges;
  import net.rim.device.api.ui.component.BitmapField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.EditField;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.FullScreen;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.decor.BorderFactory;
  import net.rim.device.api.ui.toolbar.ToolbarButtonField;
  import net.rim.device.api.ui.toolbar.ToolbarManager;
  import net.rim.device.api.util.StringProvider;
  
  import com.google.zxing.BarcodeFormat;
  import com.google.zxing.DecodeHintType;
  import com.google.zxing.common.ByteMatrix;
  import com.google.zxing.qrcode.decoder.ErrorCorrectionLevel;
  import com.google.zxing.qrcode.encoder.Encoder;
  import com.google.zxing.qrcode.encoder.QRCode;
  
  /***
   * Barcode API Sample
   * 
  
   * This application demonstrates the most common use of the Barcode API: 1)
   * Creating and displaying a QR code, 2) Scanning a QR code and opening the
   * browser pointing to that URL. It could be easily modified to scan/create
   * other kinds of barcodes, or do other things with the scanned/created barcode.
   *
   * @author PBernhardt
   *
   */
  public class BarcodeAPISample extends UiApplication {
  
      //This controls how big barcode we will display is to be
      private static final int BARCODE_WIDTH = 300;
  
      // This is the app itself
      private static BarcodeAPISample _app;
  
      // Errors will be logged here
      private LabelField _logField;
  
      // The main screen which holds the toolbar and displayed barcode
      private MainScreen _mainScreen;
  
      // The barcode is displayed here
      private BitmapField _barcodeField;
      // The text stored here is converted into a barcode by the user
      private EditField _barcodeTextField; 
  
      // This controls the scanning of barcodes
      private BarcodeScanner _scanner; 
  
      // This screen is where the viewfinderf or the barcode scanner is displayed
      private FullScreen _barcodeScreen;
  
      public BarcodeAPISample() {
          // New screen
          _mainScreen = new MainScreen();
  
          // Create the log field so it can be used in this constructor
          _logField = new LabelField("Log: ");
  
          // Create the place-holder for the barcode image and add it to the main
          // screen
          _barcodeField = new BitmapField(new Bitmap(BARCODE_WIDTH, BARCODE_WIDTH), Field.FIELD_HCENTER);
          _barcodeField.setBorder(BorderFactory.createBevelBorder(new XYEdges(2, 2, 2, 2)));
          _mainScreen.add(_barcodeField);
  
          // Create and add the field to store the barcode contents
          _barcodeTextField = new EditField("Barcode text: ", "http://devblog.blackberry.com");
          _mainScreen.add(_barcodeTextField);
  
          // Add "display barcode" and "scan barcode" toolbar buttons
          /**
           * This is a quick example of the new (in 6.0)
           * net.rim.device.api.command package and the
           * net.rim.device.api.ui.toolbar package. All it does is invoke the
           * displayBarcode() or scanBarcode() method when you click the
           * corresponding button. For more details on this package, see the
           * JavaDocs or elsewhere in the Developer Resource Center
           */
          ToolbarManager toolbar = new ToolbarManager();
  
          ToolbarButtonField displayBarcodeToolbarButtonField = new ToolbarButtonField(new StringProvider("Display"));
          displayBarcodeToolbarButtonField.setCommand(new Command(new CommandHandler() {
              public void execute(ReadOnlyCommandMetadata arg0, Object arg1) {
                  displayBarcode();
              }
          }));
          toolbar.add(displayBarcodeToolbarButtonField);
  
          ToolbarButtonField scanBarcodeToolbarButtonField = new ToolbarButtonField(new StringProvider("Scan"));
          scanBarcodeToolbarButtonField.setCommand(new Command(new CommandHandler() {
              public void execute(ReadOnlyCommandMetadata arg0, Object arg1) {
                  scanBarcode();
  
              }
          }));
          toolbar.add(scanBarcodeToolbarButtonField);
  
          _mainScreen.setToolbar(toolbar);
  
          // Add the log field to the bottom
          _mainScreen.add(_logField);
  
          pushScreen(_mainScreen);
      }
  
      // Simply create the the app and enter the event dispatcher
      public static void main(String[] args) {
          _app = new BarcodeAPISample();
          _app.enterEventDispatcher();
  
      }
  
      /**
       * displayBarcode
       * 
  
       * This method will take the text in the _barcodeTextField, convert it into
       * a QRCode and display it on the main screen. It could be easily modified
       * to use a different barcode format or to get the text from somewhere else.
       */
      private void displayBarcode() {
          try {
              QRCode qrCode = new QRCode();
  
              // This encodes the text with a low level (%7) of error correction
              Encoder.encode(_barcodeTextField.getText(), ErrorCorrectionLevel.L, qrCode);
  
              // From there we get the actual data matrix and convert it into a
              // bitmap
              ByteMatrix barcode = qrCode.getMatrix();
              Bitmap bitmap = BarcodeBitmap.createBitmap(barcode, BARCODE_WIDTH);
  
              _barcodeField.setBitmap(bitmap);
  
          } catch (Exception e) {
              log("Exception: " + e);
          }
      }
  
      private void scanBarcode() {
          // If we haven't scanned before, we will set up our barcode scanner
          if (_barcodeScreen == null) {
  
              // First we create a hashtable to hold all of the hints that we can
              // give the API about how we want to scan a barcode to improve speed
              // and accuracy.
              Hashtable hints = new Hashtable();
  
              // The first thing going in is a list of formats. We could look for
              // more than one at a time, but it's much slower.
              Vector formats = new Vector();
              formats.addElement(BarcodeFormat.QR_CODE);
              hints.put(DecodeHintType.POSSIBLE_FORMATS, formats);
  
              // We will also use the "TRY_HARDER" flag to make sure we get an
              // accurate scan
              hints.put(DecodeHintType.TRY_HARDER, Boolean.TRUE);
  
              // We create a new decoder using those hints
              BarcodeDecoder decoder = new BarcodeDecoder(hints);
  
              // Finally we can create the actual scanner with a decoder and a
              // listener that will handle the data stored in the barcode. We put
              // that in our view screen to handle the display.
              try {
                  _scanner = new BarcodeScanner(decoder, new MyBarcodeDecoderListener());
                  _barcodeScreen = new MyBarcodeScannerViewScreen(_scanner);
  
              } catch (Exception e) {
                  log("Could not initialize barcode scanner: " + e);
                  return;
              }
          }
  
          // If we get here, all the barcode scanning infrastructure should be set
          // up, so all we have to do is start the scan and display the viewfinder
          try {
              _scanner.startScan();
              _app.pushScreen(_barcodeScreen);
          } catch (Exception e) {
              log("Could not start scan: " + e);
          }
  
      }
  
      /***
       * MyBarcodeDecoderListener
       * 
  
       * This BarcodeDecoverListener implementation tries to open any data encoded
       * in a barcode in the browser.
       *
       * @author PBernhardt
       *
       **/
      private class MyBarcodeDecoderListener implements BarcodeDecoderListener {
  
          public void barcodeDecoded(final String rawText) {
  
              // First pop the viewfinder screen off of the stack so we can see
              // the main app
              _app.invokeLater(new Runnable() {
                  public void run() {
                      _app.popScreen(_barcodeScreen);
  
                  }
              });
  
              // We will use a StringBuffer to create our message as every String
              // concatenation creates a new Object
              final StringBuffer message = new StringBuffer("Would you like to open the browser pointing to \"");
              message.append(rawText);
              message.append("\"?");
              log(message.toString());
              _barcodeScreen.invalidate();
  
              // Prompt the user to open the browser pointing at the URL we
              // scanned
              _app.invokeLater(new Runnable() {
                  public void run() {
                      if (Dialog.ask(Dialog.D_YES_NO, message.toString()) == Dialog.YES) {
  
                          // Get the default sessionBrowserSession
                          BrowserSession browserSession = Browser.getDefaultSession();
                          // Launch the URL
                          browserSession.displayPage(rawText);
                      }
                  }
              });
          }
  
      }
  
      /***
       * MyBarcodeScannerViewScreen
       * 
  
       * This view screen is simply an extension of MainScreen that will hold our
       * scanner's viewfinder, and handle cleanly stopping the scan if the user
       * decides they want to abort via the back button.
       *
       * @author PBernhardt
       *
       */
      private class MyBarcodeScannerViewScreen extends MainScreen {
  
          public MyBarcodeScannerViewScreen(BarcodeScanner scanner) {
              super();
              try {
                  // Get the viewfinder and add it to the screen
                  _scanner.getVideoControl().setDisplayFullScreen(true);
                  Field viewFinder = _scanner.getViewfinder();
                  this.add(viewFinder);
  
                  // Create and add our key listener to the screen
                  this.addKeyListener(new MyKeyListener());
  
              } catch (Exception e) {
                  log("Error creating view screen: " + e);
              }
  
          }
  
          /***
           * MyKeyListener
           * 
  
           * This KeyListener will stop the current scan cleanly when the back
           * button is pressed, and then pop the viewfinder off the stack.
           *
           * @author PBernhardt
           *
           */
          private class MyKeyListener implements KeyListener {
  
              public boolean keyDown(int keycode, int time) {
  
                  // First convert the keycode into an actual key event, taking
                  // modifiers into account
                  int key = Keypad.key(keycode);
  
                  // From there we can compare against the escape key constant. If
                  // we get it, we stop the scan and pop this screen off the stack
                  if (key == Keypad.KEY_ESCAPE) {
                      try {
                          _scanner.stopScan();
                      } catch (Exception e) {
                          log("Error stopping scan: " + e);
                      }
                      _app.invokeLater(new Runnable() {
                          public void run() {
                              _app.popScreen(_barcodeScreen);
  
                          }
                      });
  
                      return true;
  
                  }
                  // Otherwise, we'll return false so as not to consume the
                  // keyDown event
                  return false;
              }
  
              // We will only act on the keyDown event
              public boolean keyChar(char key, int status, int time) {
                  return false;
              }
  
              public boolean keyRepeat(int keycode, int time) {
                  return false;
              }
  
              public boolean keyStatus(int keycode, int time) {
                  return false;
              }
  
              public boolean keyUp(int keycode, int time) {
                  return false;
              }
  
          }
      }
  
      /***
       * log
       * 
  
       * Writes a message to an edit field for debug purposes. Also sends to
       * STDOUT.
       * 
  
       *
       * @param msg
       *            - The String to log
       */
      public void log(final String msg) {
          invokeLater(new Runnable() {
              public void run() {
                  _logField.setText(_logField.getText() + "\n" + msg);
                  System.out.println(msg);
              }
          });
      }
  }
  

  My request is properly signed and work very well in the Simulator.

  Thanks in advance.

  Solved.  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/Support_-_Sign...

• LastVisibleItem

  Can someone give me an example of how I can find the name of the last visible item in a list. I tried the following, but it gives me a null value, while the list has a number of entries.

  trace("Last visible item: " + myList.lastVisibleItem);
  

  Hey,.

  just a follow-up. Simply re-directed my code and saw that there is a race condition that kind of thing going. Bascially when you do the lastVisibleItem property right after making the list, the list has not been fully created yet so it doesn't have a lastVisibleItem property value. I put in a trace of delayed and it seemed to work. Here is the sample code that I fell:

  ListTests.as:

  package{   import flash.display.Sprite;  import flash.display.StageAlign;  import flash.display.StageScaleMode;  import flash.events.Event;    import flash.utils.setTimeout;
  
    import qnx.ui.data.DataProvider;  import qnx.ui.events.ListEvent;   import qnx.ui.listClasses.DropDown;   import qnx.ui.listClasses.List;   import qnx.ui.listClasses.ListSelectionMode;  import qnx.ui.listClasses.RoundList;  import qnx.ui.picker.PickerList;
  
    [SWF(width="1024",height="600",backgroundColor="#e8e8e8",frameRate="30")] public class ListTests extends Sprite {     private var myList:List;      private var myDataProvider:DataProvider;      private var myArray:Array;
  
        public function ListTests()       {         super();
  
            // support autoOrients            stage.align = StageAlign.TOP_LEFT;            stage.scaleMode = StageScaleMode.NO_SCALE;
  
            myList = new List();          myArray = new Array();
  
            myArray.push({label: "Thomas Luddington", selected: false});          myArray.push({label: "Master Maruyn", selected: false});          myArray.push({label: "Master Gardyner", selected: false});            myArray.push({label: "Captain Vaughan", selected: false});            myArray.push({label: "Master Kendall", selected: false});         myArray.push({label: "Master Prideox", selected: false});         myArray.push({label: "Robert Holecroft", selected: false});           myArray.push({label: "Rise Courtenay", selected: false});         myArray.push({label: "Master Hugh Rogers", selected: false});         myArray.push({label: "Thomas Foxe", selected: false});            myArray.push({label: "Edward Nugen", selected: false});           myArray.push({label: "Darby Glande", selected: false});           myArray.push({label: "Edward Kelle", selected: false});           myArray.push({label: "Iohn Gostigo", selected: false});           myArray.push({label: "Erasmus Clefs", selected: false});          myArray.push({label: "Edward Ketcheman", selected: false});           myArray.push({label: "Iohn Linsey", selected: false});            myArray.push({label: "Thomas Rottenbury", selected: false});          myArray.push({label: "Roger Deane", selected: false});            myArray.push({label: "Iohn Harris", selected: false});
  
            myDataProvider = new DataProvider(myArray);
  
            myList.dataProvider = myDataProvider;
  
            /**            * set the cell renderer to the renderer holding           * your new skin           */
  
            myList.selectionMode = ListSelectionMode.NONE;            myList.rowHeight = 55;            myList.setPosition(100,25);           myList.setSize(500, 400);         myList.setSkin(MyRenderer);
  
            addChild(myList);
  
            setTimeout(function():void{trace("Last Visible Item: " + myList.lastVisibleItem.index);}, 1000);
  
        } }}
  

  hope that sheds some light. Good luck!

• In FXML menu bar

  Hello everyone: I am completely new to JavaFX with no prior knowledge of Java Swing. I've always worked on web-based applications and thus run into all sorts of trouble. Advice on the resolution of it would be much appreciated.
  
  I have an application with a login page and a homepage. The home page has a menu bar that I'm not able to get to the screen.
  
  The FXML for menu page is:
  
  -----

  ........................
  ........................
      <children>
          <AnchorPane>
              <children>
                  <fx:include source="header.fxml"/>
                  <Label layoutX="20.0" layoutY="15.0" style="-fx-font-size: 2.0em;" textFill="white" text="Welcome " />
                  <Label layoutX="130.0" layoutY="15.0" style="-fx-font-size: 2.0em;" textFill="white" fx:id="userName" />
                  <Label layoutX="2.0" layoutY="100.0" style="-fx-font-size: 1.0em;" textFill="white" fx:id="printTime" />
              </children>
          </AnchorPane>
          <MenuBar fx:id="menuBar"/>
      </children>

  -----
  
  This is my welcome controller: I have to load the content of the menu bar in the controller that I provide access restrictions to certain users based on their role. However with the code below, I am not able to display the menu on the screen.
  
  -----

  public class WelcomeController implements Initializable {
  
      @FXML
      private Label userName;
      @FXML
      private MenuBar menuBar;
  
     @FXML
      private void logoutFromApp(ActionEvent event) {
          App.getInstance().userLogout();
      }
  
      @Override
      public void initialize(URL url, ResourceBundle rb) {
  
          Logger.getLogger(WelcomeController.class.getName()).log(Level.INFO, "Enter initialize");
  
          User loggedUser = App.getInstance().getLoggedUser();
          userName.setText(loggedUser.getId());
  
  
          // Created as per one of the examples online
          menuBar = new MenuBar();
  
          // Prepare left-most 'File' drop-down menu  
          Menu fileMenu = new Menu("File");
          fileMenu.getItems().add(new MenuItem("New"));
          fileMenu.getItems().add(new MenuItem("Open"));
          fileMenu.getItems().add(new MenuItem("Save"));
          fileMenu.getItems().add(new MenuItem("Save As"));
          fileMenu.getItems().add(new SeparatorMenuItem());
          fileMenu.getItems().add(new MenuItem("Exit"));
          menuBar.getMenus().add(fileMenu);
  
  
          // Prepare 'Help' drop-down menu  
          Menu helpMenu = new Menu("Help");
          final MenuItem searchMenuItem = new MenuItem("Search");
          searchMenuItem.setDisable(true);
          helpMenu.getItems().add(searchMenuItem);
          final MenuItem onlineManualMenuItem = new MenuItem("Online Manual");
          onlineManualMenuItem.setVisible(false);
          helpMenu.getItems().add(onlineManualMenuItem);
          helpMenu.getItems().add(new SeparatorMenuItem());
          final MenuItem aboutMenuItem =
                  MenuItemBuilder.create().text("About").onAction(
                  new EventHandler<ActionEvent>() {
  
                      @Override
                      public void handle(ActionEvent e) {
                          System.out.println("You clicked on About!");
                      }
                  }).accelerator(
                  new KeyCodeCombination(
                  KeyCode.A, KeyCombination.CONTROL_DOWN)).build();
          helpMenu.getItems().add(aboutMenuItem);
          menuBar.getMenus().add(helpMenu);
  
  
          Logger.getLogger(WelcomeController.class.getName()).log(Level.INFO, "Exit initialize");
      }
  }

  -----
  
  Also can someone suggest me a good book on JavaFX 2.0 which broadly covers FXML?
  
  Thank you.

  I think that there are a number of things going on here:

  (1) in your controller, you replace the menu bar, you created in your document:

  menuBar = new MenuBar();
  

  You don't need to do - FXMLLoader will automatically inject the field of the menu bar with the value named in the document ().

  (2) you put the bar menu at the bottom of a part of the stack. It may not produce the layout you want.

  This should work (to be noted that it requires that JavaFX 2.1 - if you need something that works with 2.0, made me know):

  G

• Using the simple custom event

  I try to get a better understanding of the events and to create my own custom events and calling dispatchevent. This is in reference to a previous post here: http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=60 & catid = 585 & threadid = 1329712 & enterthread = y
  
  Initially, I tried to get this working in the middle of a bunch of other things going on but could not get my disptachevent to trigger the listener that I had put in place. After messing around for a while, I decided to just pull this part out and try to get the basics of this work (I always have problems with). While I can find a lot of examples, listeners in action out of events predefined (such as mouse clicks) can't get a lot about what I'm trying to do. I don't know I am missing a simple property of the events and making a call wrong here but I can't understand what it is.
  
  

  Quote:
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" initialize = "createListener ()" >
  
  < mx:Script >
  <! [CDATA]
  
  Import mx.controls.Alert;
  
  public function createListener (): void {}
  var dataListener: EventDispatcher = new EventDispatcher();
  
  dataListener.addEventListener ("myEvent", retrieverListener);
  Alert.Show ("listener created");
  }
  
  public void retrieverListener(event:Event):void {}
  Alert.Show ("event fired");
  }
  
  private function tempFunction (): void {}
  dispatchEvent (new Event ("myEvent"));
  }
  
  []] >
  < / mx:Script >
  
  < mx:Button = "108" x = "193" label = "Button" click = "tempFunction ()" / >
  
  < / mx:Application >
  

• Failed to create the specific message of B2B Protocol

  Hello
  
  I get this error when sending the message-
  
  
  
  Machine Info: (PUNITP84609D)
  Description: Failed to create the specific message of B2B Protocol
  StackTrace:
  Error -: AIP-51503: general create Message error: java.lang.Exception: java.lang.NullPointerException
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2289)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1641)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
  at oracle.tip.adapter.b2b.data.MsgListener.onMessage (MsgListener.java:833)
  at oracle.tip.adapter.b2b.data.MsgListener.run (MsgListener.java:400)
  at java.lang.Thread.run(Thread.java:534)
  Caused by: java.lang.Exception: java.lang.NullPointerException
  ... 7 more
  Caused by: java.lang.NullPointerException
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.getPrivateKeyFromWallet(EBMSExchangePlugin.java:5967)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.getPrivateKeyForSigning(EBMSExchangePlugin.java:5322)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.signAttachment(EBMSExchangePlugin.java:5160)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2130)
  ... 6 more
  
  
  What could be the source of the error?
  
  Thank you.
  
  Kind regards
  Anuj Dwivedi

  Hello

  There is another method that can help you get things going. 'Orapki' is a utility that is shipped along with the installation of the Oracle Application (path on windows $ORACLE_HOME/bin/orapki.bat) server and you can use the same to generate the wallet and certificate for your test object.

  Here are the steps, first of all, let's create an empty wallet and the second will add a self certificate signed to it.

  1 C:\Oracle10g\midtier2\bin\orapki.bat wallet create - portfolio. Eu1 - pwd
  2. Add C:\Oracle10g\midtier2\bin\orapki.bat wallet - wallet. -1024 key size - dn "CN = sample" - self_signed - pwd eu1 - validity 365

  Note: For some reason the private keys attached to the wallet created using keytool do not appear, or may not be localizable.

  Kind regards
  Sinkar
  [Correction to Ramesh team]

• format of the clock after upgrading to IOS 10

  After the upgrade to IOS 10.0.2on my iphone 6 s the clock passed using two points using a format point.

  Language and region are still like before upgrade: Norway.

  I tried to change in various other regions which, to my knowledge, uses the same format of the clock, but there is still a point. Is there another way to change this?

  Hi, ferdinanden!

  Thank you for reaching out by Apple Support communities. From your post, I understand that your clock is not displayed as expected in the iOS 10. Rather than see a colon, showing time as 07:32, you see just one point, displaying the time as 7.32. I would be happy to offer help!

  There could be a few different things going on to cause this, and change your region has been a great first step to understand that and fixing it. Given that this did not help, try the following steps. Before you start, use this article to create a backup of your iPhone: How to back up your iPad, iPhone or iPod touch
  

  1. Replace it with another under settings > general > language and region. See if that allows you to adjust the way in which the clock is displayed. If so, revert to the language of your choice and see if she spends exactly the point again.
  2. Make sure that the value is automatically enabled under settings > general Date & time
  3. Restart your iPhone by following the steps here: restart your iPad, iPhone or iPod touch
  4. Reset your iPhone settings in settings > general > reset > reset all settings. This will not delete your personal data (such as your photos/videos, contacts, calendar of events, etc.) but it can reset it customizable settings (as the wallpaper / brightness, alert sounds/ringtones, the Date and time settings, etc.) to their default values. It will also remove saved passwords and Wi - Fi networks and all previously used settings APN or VPN.

  Have a great day!

• What happened to the version patches-new organ is acting weird bug

  IMAC 2.66 GHz Intel Core 2 Duo 4 GB. Recently updated to OS 10.11.6 and Logic Pro X version 10.2.4. Have had all kinds of strange things going on acting buggy. Is to assign a piece for organ, but impossible to find patches of organ in what were before upgrade. I downloaded all the sounds of the relevant library. What is going on. We will have to wait for another upgrade? should I go to backup and reinstall the older versions?

  Thank you

  IN the Inspector - watch the channel bandwidth and make sure that the blue triangle is up next to the insert for the instrument. If it's not - click to the left of the insertion to move there. This sets the context of what the library shows.

• download RealPlayer has stopped working

  RealPlayer Downloader worked very well in FireFox and explore. I did a Windows Update and the Realplayer downloader doesn't work anymore.

  Hello

  Have you tried just to re - install RealPlayer (or level to the new RealTimes)?

  I had the same problems in the past, but a re-installation got things going again (at least for me. I do not, however, promise anything...)

      B.R.
  

• Solve a problem by getting an Airport Extreme to join my network.

  Greetings,

  I have a WiFi network, consisting of a router TimeMachine (primary Base Station), the AirPort Extreme Base Station and expansion of the Airport Express network

  I receive notification messages for these devices utility AirPort (Enter Password) - probably updates lately.  I do not know the passwords for these devices because I've had them so long and after initial installation and many updates of OS X I couldn't find entries for them in Keychain Access.

  Today, I made an attempt to reset the Airport Extreme to try and go through the installation routine and have the opportunity to create a new password and save it.  First of all, I did a soft reset and then tried a hard reset.  The results were the same for either - one error as follows...  Airport Extreme fits factory currently.  It is plugged in and running with a light orange blinking.  She appears in the WiFi menu as a new Airport base station.  Selecting menu launches Airport utility and a dialog box drop-down connection.  The dialog box States "collecting information on your network - preparation, Joining Airport Extreme and finally"an unexpected error has occurred, try again"there is a very brief message (.5sec) before the last error - try again.»  In my view, that it is said 'Extreme Base Station on your network'.  This could mean that because the TimeMachine works as the main base station, the Airport Extreme Base cannot be joined so that I can Setup/modify it.

  Ultimately I'd like to get the issue resolved for all three devices password, but I'm a little gushy now after this attempt

  Someone has an idea how to proceed.

  Thanks Dave

  There are several things going on, but you can fix pretty quickly is the password. It is a piece of information that you should really have - now and for the future. You can reset your password by sticking the end of a paper clip in the back of the airport for more than ten seconds. You will see the configuration on the Airport utility screen. Do not forget your password in the future.  At the end of this operation, you can see a firmware view - to take care of that.

  Once your airport is reset, and the password is updated and updates, you can see if there are any problems - if any. If there are additional questions, you can include a photo of the Airport utility screen.