Satellite P200 made strange noises after the closure of music

Similar Questions

• Satellite L505-13Z - strange noise in the audio output

  Hello

  I had a problem with my speakers (probably the one on the left): starting Windows or when windows live notifies a new incoming message sound I hear is not clear, but there is a noise similar to a robotic sound. Sounds like my speakers don't work well. 10 days ago, I bought my toshiba.

  Thank you very much

  Hello

  > to start windows or when windows live notifies a new incoming message sound I hear is not clear, but there is a noise similar to a robotic sound. It looks like my speakers
  > do not work well. 10 days ago, I bought my toshiba.

  What happens if you connect the headset and check what's happening? When you listen to the music it exists?
  I think that you have to play with some settings of his windows event.

• Satellite A500-13F - strange noise when the context changes

  I hear "zzzzzzzzz" when the substantive change and when I go to open the page to another;

  I tried to change the realtek audio driver, but it does not work and when I played, it be very strong and get high...

  Please help me!

  Hello

  Whence the noise?
  It comes from speakers or HARD drive maybe?

  > I hear "zzzzzzzzz" when the substantive change and when I go to open the page to another;
  Have you noticed that noise only with internet explore?
  It is not using batteries or adapter only?

  Please check this and please provide more information and details.

• Camileo H20 - strange noise throughout the video

  Hello.

  I today received delivery of my first camcorder, which as the title suggests, is a Toshiba Camileo H20.

  Overall, I am impressed with this little camera, but there is a problem that concerns me. After reviewing a video of test, I created to see what the quality was as I noticed a strange sound throughout the video. I struggle to describe, it's a bit like static/interference. The thing is that I already have some tests to find out what could be the cause of it, and I found nothing. Again, the camera records audio as usual, but this static/interference is there with her.

  At first I thought it's maybe because I'm close to electronic devices such as a TV and a PC, so I went in my new garden and filmed there, but noise persists. Then I covered the microphone to see if it makes a difference, but it didn't. I also tried different video modes, leaving the camera on a desk to record walking around a room and then I even resorted to transform a sound recording off altogether. The strange thing is that the camera has always been that noise when I play the video on my computer even if no sound is registered.

  I have a slight suspicion thinking he made this noise if the camera is moved. But if I remember correctly it makes the same noise when it was not moved on the desktop.

  Someone at - it ideas on how to solve this problem? Preferably not by reference. I would like to, but I don't have time because I'm going on vacation next week and I want the camera to do this.

  Thanks in advance.

  I'm downloading two videos on YouTube in VGA mode and 720 p. Once they are uploaded I will edit this post with the links.

  HD:
  http://www.YouTube.com/watch?v=EqxzQi5G0Sc

  VGA:
  http://www.YouTube.com/watch?v=9fMjfIqK09Q

  Quality cannot be correct because they have just the end of the download.

  Hello

  I have no idea why this strange sound appears, but I found in the manual of the user an interesting point.
  You can disable and enable the sound of keyboard and operating noise.
  In Submenue setting, press the button to go to the audio menu. Use the left/right keys to select ON or OFF. Press the menu button OK to validate the settings.

  The other point is that you said that this noise appears when you play the video on your computer. Maybe it's just a s codec problem.
  I remember that the sound on my movies created with the HD cam is really strange questions wore on the package of codec missing on my laptop. In addition, the player didn't manage HD sound.
  I chose the stereo settings and then the sound was ok

  I'm not very well if this might be a reason in your case but it s m worth a try
  Check the sound configurations and try to install some codec packs too

• Satellite P200-1EE - Vista stuck on the homepage

  Hello

  * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

  I tried several solutions using the F8 key at startup.

  1 / safe mode

  2 / startup repair. "Windows cannot repair this computer automatically.

  3 / the system restore. "No restore point.

  4 / windows complete PC Restore. "No restore point.

  5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

  So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

  But I'm not too sure of the latter option. That's where I need your advice.

  * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

  Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
  Could you advise me on the best option?

  Thank you

  Paul

  > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

  Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
  If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

  > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
  > Could you advise me on the best option?

  If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
  Usually, you should be able to access the D partition and would be able to move all the data to another computer.

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite X 200 - strange sounds, close the cooler

  I have this x 200 for over a year now and for the last 10 days, I hear strange noises near the cooler which is located on the lower side right (the cooler in the cooler of the DVD).

  I don't know how to open this workbook for maybe clean the fan or Exchange it. It looks like a guide to disassemble for this machine.

  Thank you

  Sounds like the fan needs to be replaced.

  Is the system under warranty? I would send it to an ASP for repair. The X 200 is a complicated design and can be difficult/risky to pull out by the owners.

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• strange slowdown after the updates today

  Hello-
  noticed a strange delay after the system starts. The system booted and the office appeared in a timely way (30-40 seconds)
  as he always does.  I uninstalled my antivirus while this problem.  (Avast from Add/Remove programs
  and usefulness clear for good measure).

  Here's what's happening.  AprΦs dΘmarrage, logon and the desktop appears, the warning that no AV is installed
  (from Security Center?) takes a full 90 seconds for it to appear.   In addition, during those 90 seconds, Outlook Express cannot
  to complete it's search for new messages and a manual to open the Security Center fails.

  After 90 seconds, everything started to work... Is something delay?  Certain services having a problem starting?
  Thanks in advance for any help.

  Dave

  EDIT - I investigated further after that I posted above.
  Apparently, this problem is caused by the Microsoft.Net Framework 4.
  Open the CMD prompt, navigate to \WINDOWS\Microsoft.NET\Framework\v4.0.30319
  and by running the command
  NGEN executequeueditems
  the system spends ten minutes compiling some objects.
  Finally, you get a message saying that 'all compilation targets are up-to-date.

  Rebooted the system and startup is back to normal. Access to the network and the opening of
  Delays in Security Center disappeared.

  Hello

  I'm happy to hear that you were able to solve the problem and thanks for letting us share the resolution. Let us know if face you any problems with Windows in the future.

• Emails disappearing after the closure of my Windows Mail (Vista)

  After that I opened an email in my Windows Mail (Vista) then close it, the next day, when I look for this email went. I looked in, "Delete","" box of ", etc. They simply disappeared!?    Even on the date and the same time if I see email is after the closure, but then I click on 'Junk Mail' for example and then again in box enamel disappeared.  When I realized what was going on I tried 4 times with odd ball different emails and it happened every time.

  In each folder: view | Current view. Make sure show all Messages is the only option that is checked.
   
   

• Inadmissible Windows desktop after the closure of the programmes

  Hi, I recently met a problem with vista. IM on windows vista Home premium service pack 2. A few days after the closure of a program that my office did not at all, cannot select all the icons on the desktop and right-click on it also did not work, it seems to be with various programs and not bound to a single, though the first program that screwed up windows Explorer, I was reviewing some files. My menu of the taskbar and start work very well and can get into almost anything from there. When I want to restart my computer I see then all selections that I did on the desktop suddenly appear just before the reboot like something is hung up. I have norton 360, valid copy and its updates and is not at all to any virus. Someone who can help I would be greatly appreciated!

  Hi, I recently met a problem with vista. IM on windows vista Home premium service pack 2. A few days after the closure of a program that my office did not at all, cannot select all the icons on the desktop and right-click on it also did not work, it seems to be with various programs and not bound to a single, though the first program that screwed up windows Explorer, I was reviewing some files. My menu of the taskbar and start work very well and can get into almost anything from there. When I want to restart my computer I see then all selections that I did on the desktop suddenly appear just before the reboot like something is hung up. I have norton 360, valid copy and its updates and is not at all to any virus. Someone who can help I would be greatly appreciated!

  To make sure that I understand what you were saying...
  Your problem is that your desktop icons are not suitable.
  But if you open the start menu, you have no problems to access anything whatsoever.
  If my understanding of your problem is correct, then maybe your desktop icons are corrupt.
  Here is a tutorial that will help you rebuild your cache of icons:
  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  Please let us know the result.

  t-4-2

• When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. are you referring to the startup sound?
  3. What is the brand and model of the computer?

  I suggest you try the steps from the following link:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.

• How can I keep the workstation user interface log after the closure of the workstation?

  Hello

  On a Windows host, the newspaper of the UI for desktop is called vmware - < user name > - < PID > .log and is stored in the user's TEMP directory. Now, I got a problem that occurs during the closing of the workstation. I want to check the log to see what's happening, but the user interface log is deleted automatically after the closure of the workstation.

  Is there a way to tell the workstation no do not remove the log of the user interface? Thank you.

  Well, can you try this?

  %AppData%\VMware\config.ini to edit and add:

  UI.log.FileName = "C:\some\path\to\logfile\vmui.log".
  UI.log.Keep = 'TRUE '.

• process on the main window to stop running after the closure of a modal dialog box

  Hi everyone, I am new to Oracle Forms so any help would be appreciated.
  
  Here's the scenario: I'm on MY_MODALESS_WINDOW and run a trigger that looks like:
  
  ================================
  execute_trigger ('TRIGGER_1');
  If form_failure then goto FAIL; end if;
  
  show_window ('MY_MODAL_DIALOG');
  synchronize;
  raise form_trigger_failure;
  
  execute_trigger('TRIGGER_2);
  If form_failure then goto FAIL; end if;
  
  < < FAIL > >
  null;
  
  ================================
  
  -No error in compilation.
  -Here is the number: TRIGGER_2 has never been called/executed after the closure of the MY_MODAL_DIALOG?
  
  Thanks again,
  
  Published by: user12216598 on March 12, 2010 09:07

  As I said before, open a modal window does not stop execution of the current procedure. If you need this behavior, put your modal window and all its components in another form module and use CALL_FORM to open this form. Then the execution stops at the CALL_FORM statement and and will continue after the CALL_FORM when you leave the form called.