Qosmio F10 main board replacement - update of the BIOS etc.

Similar Questions

• Qosmio F50 update of the Bios (PQF55E)

  The F50 battery do not load, maybe a problem with the BIOS (like U400)?
  Question: Where can I find a file change log of the BIOS to the version of BIOS released 6.11.08?

  Hello

  As I know there is all the details on the Toshiba European page on changes to the BIOS. I searched but I n t find anything

  However, if there is a new update of the BIOS for you phone model, then you can update. Let's see what happens
  But there is still a big chance that your battery can malfunction

  Greetings

• HP Probook s 4440: the update of the BIOS under Linux

  Hello

  My laptop (HP Probook 4440 s) is in the list of laptops with BIOS updates related to security issues [1].

  But I'm on Linux, for which no updates seems to be available [2], although there is an update of the BIOS available for Windows [3]?

  Could someone tell me how to get and apply this update via Linux...

  THX,

  Abdellatif

  [1]: https://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04393276

  [2]: http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229488 & swItemId = ob_107629_1 & swEnvOid = 202...

  [3]: http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229488 & swItemId = ob_135974_1 & swEnvOid = 413...

  I did recently on my HP ProBook 450 G2 Kubuntu Linux 15.10 running.

  A new version of the BIOS (01.16 Rev.A 1 December 2015) was available, but for Windows only.

  What I had to do to install the BIOS under Linux:

  * Download the exe file (for example: sp74048.exe): this is an archive

  * unpack with 7zip

  * go to my laptop configuration: restart, press [ESC] >

  Configuration of the BIOS F10 > MAIN > system update BIOS > BIOS update using local media

  * read the instructions:

  "Place the system on a FAT32 partition no BIOS BIN file more

  on the system or on a removable USB hard drive

  under the folder "Hewlett-Packard\BIOS\New.

  Then, add or verify that the HP Bios update utility (HpBiosUpdate.efi)

  and the signature file (HpBiosUpdate.s12) are

  on the same partition FAT32 under

  the path to the following folder: "Hewlett-Packard\BIOSUpdate. »

  * Take a flash drive, create the folder ""Hewlett-Packard\BIOS\ " "

  copy the whole folder "BIOSUpdate" since the original installation file for her

  create the "New" folder and copy the bin on it (in my case "M74_0116.bin")

  * If at the end, the flash drive looks like this:

  \---Hewlett-Packard

  + - BIOS

  | \---New

  |      Mxx_xxxx. bin

  |

  \---BIOSUpdate

  all files here

  * place the flash drive in the laptop and "BIOS update using local media" hit the button [I accept] below "the system BIOS will be updated immediately.'." "

  Then update the BIOS HP appears saying: the system BIOS is updated day. > writing new BIOS Image. > Veryfying new BIOS Image. > restart.

  Fact.

  It is really beyond me why HP does not provide a simple archive with the appropriate directory structure and a readme file so that anyone could update the BIOS regardless of operating system.

  Warning: I'm just an average Linux user. This procedure worked for me, but before use, you must consider the risks for yourself. You SHOULD know what you're doing.

• My slimline s5212y cpu fan seems to work fast constantly.is it an update of the bios for this?

  Hello

  I replaced the motherboard on a tower of s5212y slimline (the same Board of model). Everything works fine, but the cpu fan seems to work too quickly, constantly. Y at - it an update of the bios that fixes this?

  ICU wrote: Hi, I have replaced the motherboard on a tower of s5212y slimline (the same Board of model). Everything works fine, but the cpu fan seems to work too quickly, constantly. Y at - it an update of the bios that fixes this?

  Hello uti, I checked for an update of the BIOS of your system but could not locate a.

  You can try to reset the BIOS, either by removing the CMOS battery, or perform the jumper pin method.

  If you remove the CMOS battery, boot the system and enter the BIOS and reset the time, day, and year, save these settings and reboot the system.

• The update of the BIOS on Satellite Pro U400?

  I have a Toshiba Satellite Pro U400 (PSU41E) running Windows 7 x 64 and I try to update the BIOS to version 4.70 to 4.00.

  Whenever I try to do it from Windows using WinPhlash which comes with the download on the Toshiba site it seems to freeze when you try to Flash the new BIOS.
  I connected as the local administrator, tried to use other programs flash and even tried to do from a USB flash drive with no luck.

  Can someone please help me and explain how do I update the BIOS?

  Hello

  > tried to use other flash programs
  Never use other flash programs! In the worst case, you could damage the ROM module and then it must be replaced. Use only the program flash Toshiba that is tested and designed for laptop and the version of the BIOS.

  The update of the BIOS program is also designed for Windows, it s a Windows Update program.

  Satellite Pro U400 wasn t comes with Windows 7 so I guess you did your own installation. Value added package is required for the update of the BIOS program and can be downloaded on the European driver of Toshiba download page where is your laptop model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• How I restore the update to the BIOS on Satellite U400-157?

  I recently updated a Tempro alert for update of the BIOS for the notebook. Now, I noticed that the screen blanks a few times at PC startup. It was't there before. How do I roll back the update of the BIOS to a previous one.

  I don't get to see the BIOS updated screen other cases other than the time I did the BIOS update.

  Hello

  To be honest I don't understand exactly what your problem is.
  You said:. Now, I noticed that the screen blanks a few times at PC startup.
  Does that mean exactly? Is your black screen until Windows has started?

  To be honest, I put t think the BIOS update would be the reason for which go into the BIOS (press F2) and set the default BIOS settings (F9) and save the changes (F10).

  If you want to recover the BIOS version earlier, then you will need Flash module ROM BIOS using a basic BIOS version BACK. You will find on the European driver Toshiba page only the win versions

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

• Satellite A200-1TD - gel during the update of the BIOS

  I have a laptop model Satellite A200-1TD: PSAE0E, XP operating system

  I tried to update the BIOS and it did not work so he blocked. After that a few minutes, I tried to restart and it didn't worked so I unplugged the AC cable. After that, he did not answer. Black screen, no sign.

  Help, please

  Hello

  I think that, in this case, you can do nothing because the ROM module has to be reflashed and in the worst case the whole mainboard needs to be replaced.

  These freezes during the update of the BIOS can cause such problems as the laptop doesn't start over.

  Moreover, on the Web from Toshiba site you can find an authorized service provider:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an ASP.

  Welcome them

• DON'T DOWNLOAD THE LAST UPDATE OF THE BIOS

  Updated HP had me to download an update of the BIOS today (10/01/13) that crashed my computer. He showed a blue screen and says that the BIOS is not ACPI compatible.

  Here is how I fixed my computer:

  1. I restarted my computer and kept pressing the ESC key.
  2. A menu came, and I pressed F10 to access the BIOS options.
  3. I selected the option "roll back BIOS.
  4. Once the BIOS has been restored, the computer restarted and says that Windows failed to open and he began a process of auto repair.
  5. During this process, he asked if I wanted to restore the computer to a previous state, while it was working properly. I said yes.
  6. When he was done, the computer was working again.

  This may solve your problem if happen you, or has already occurred.

  Have fun

  The f

  Finally, HP came out with a new firmware for this machine: F2. B

  Fix/development

  -Provides security improved for UEFI EDK2.

  NOTE: HP recommend transitioning to this BIOS update without delay.
  -Fixed an intermittent problem where the system stops working when the system is turned on (started) while a USB device is connected to the system.

• Username and password required for the update of the BIOS download?

  Hi guys,.

  Hoping someone could help.

  Yesterday, I received my Mini of click on Satellite and I currently support after discovering there is a certain drivers are installed before you can actually use the thing.

  While the laptop is in charge, I try to download the update of the BIOS on my laptop, so I can transfer it to my laptop once it is fully charged... I did have problems downloading tastes of the driver wifi for example but when I try to download the BIOS update opens a new and tab where Toshiba ask me a username and password? I tried to enter my username and password I used to register on this site and I also tried using another computer to download it, but without success. It is worth noting that I could partially download the file last night but then it failed to half way through download?

  Any suggestions?

  Thank you very much

  Liam

  Hi all

  I am eager to read an answer that helps on these issues...

• Tecra M10 - update of the BIOS says "this computer is not supported.

  Recently refurbished a M10 - 10I to reinstall the operating system. WinXP install at all so I try to update the BIOS as it seems quite old (V1.5). Most recent version (and is available) for this machine seems to be V3.0. Download and try to run the file "P0065V300" and get the message:

  Package for the TOSHIBA BIOS ver.3.3.0
  This computer is not supported

  What can I do? Its supposed to be for this model!

  Also, prefer a version of boot drive, but hey, I can use a version of Windows, assuming that it runs on Win7.

  Hello

  Tecra M10 - 10I belongs to the series of PTMB1E and according to the page of the Toshiba UE driver, BIOS v3.00 - WIN is the latest BIOS version which is available for this model.

  The BIOS update requires a few additional tools Toshiba as VAP (additional package for Win 7)

  If this driver isn't installed, the update of the BIOS would not work.

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• Portege Z930 - 12 H - update of the BIOS and McAfee Endpoint Encryption?

  The update to the latest BIOS (Ver.6.70) for my laptop Portege Z930 12 H comes with the warning:

  «If you use the BitLocker Windows Drive encryption, please temporarily suspend (or turn off) before BitLocker Drive Encryption updated BIOS.»

  The same caveat applies to McAfee Endpoint Encryption, which is used on my laptop and I can * not * pause or stop? Or can I apply the upgrade of the BIOS safely?

  Thank you.

  As much I know Bitlocker isn't related to Antivirus from McAfee software and two security tools are not connected to each other. BitLocker is a tool for Microsoft Windows and McAfee is a 3rd party software preinstallation on the device.

  I found a nice how doc on the update of the BIOS.

  [How to upgrade the BIOS on Toshiba laptops | http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm]

• Satellite A110-180 - update of the Bios for Windows 7 and Linux

  Hello

  I want to change the following settings in my bios on my laptop satellite A110-180
  * AHCI for SATA
  Disable the IDE

  But none of these options.
  So I thought that maybe I should update my bios.
  I found the download page, but there are 2 options: Windows Vista or NO vista, but I want to dual boot windows 7 and linux.

  Which one should I download, or is there another option to change the settings?

  Thank you!
  Bart

  Hello

  Satellite A110 does not support these options (SATA AHCI).
  The update of the BIOS will not help you!

  Linux is not supported and therefore, you will not find any special BIOS for Linux OS!

  The two BIOS updates are for Win Vista or OS independent.
  Therefore, if you use other than Vista OS then you should throw the update of the independent BIOS to the BONE!

  But as mentioned above; both options will not appear after the BIOS update!