My ReadyNAS does not appear as a network computer

Similar Questions

• Computer laptop XP does not appear in the network of Vista laptop

  My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.

  Can someone help me with this? Thank you so much in advance.

  Hello
  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How can I include my Apple TV in a homegroup. It does not appear on the network, but it works?

  I am using Windows 7 on my XP8000.  I installed Apple TV several months ago.  I wired it to my router.  Everything seems to work fine except when I display the network, Apple TV does not appear.  When I try to SECECT work of the Apple TV, nothing coming except the XP8000.  I can't do anything else.  I thought maybe I should do the part of the Apple TV from the residential group, but can't seem to do it.  Any help would be appreciated of course.  Thank you.  I have AppleCare for Apple TV, but have not used.

  You would not 'see' the Apple TV in the window of Windows 7 network. The Apple TV
  using proprietary protocols. With regard to the content of the navigation using the Apple TV to go
  the computer http://www.apple.com/support/appletv/getstarted/ should help. If
  you have questions, you should post in the apple forums.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• My cd drive does not appear in the my computer list. Œuvres to eject and it looks like it works.

  Under my computer, Miss me my CD card. I hear the CD player to make the noise, but it will not be displayed on the screen. So I can't read CD that I saved the material on. My Dell is only 3 years old. Maybe bad CD player already? Can you help me? Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The previous computer's internal drive does not appear on the current computer

  I have an old hard drive of my days of windows XP.  I plugged on my current computer about a year ago and I was able to access the drive.  Recently, I reformatted my C drive, and I am more able to access the external drive now from a previous computer.  Nothing happens at all.  It does not appear in the computer file.

  The first step you should take is to enter the BIOS Setup program and check if the disk is visible there.

• First Pro does not appear on my secondary computer

  First Pro Cs6 does not appear on my cloud program manager secondary portable adobe creative.  Why is this and how can it be remedied?

  If a program is not available for editing in the application manager this means normally the machine is not compatible with the program.

• The so-called Ralink APS does not appear on my network and I don't know who or what he is.

  RALINK APS appears on my network.  I'm the only person on my network.  I've been hacked so many times it's RIDICULOUS.  It comes and goes... I can't remove it.   The manufacturer is Ralink Technology, model: Ralink model of Access Point, model number RT2860's serial number: 12345678, MAC address is: said 00.26.f3.64.b2.98, IP address: unavailable.

  I have a router, a stand-alone modem, I use avast and security systems prev.  This router should not be on my network.  When it appears, it is as if someone else has control of my computer.  Have I been hacked again?  Can someone please help?

  original title: network Hacking

  I have Windows 7 64 bit.  It seems not to be in the file you mentioned above.  The properties of said TeamViewer amended 10/17/11.  I guess I'll just try to remove it from my office.  FYI: I just checked and RalinkAPS is on my network as we speak.

  Thanks for your help.  Any other suggestions?

  Yes - I don't know why the other person told you to uninstall TeamViewer in fact (it was not installed - once again you had on your desktop * was * installer - not a shortcut to run it.) - but I think that this will address the initial question:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/ralinkaps-WiFi-chipset-shows-up-in-network/e0860b5b-E542-E011-9577-d485645a8348

  He could have you some of the same symptoms as you have described - but could so many other things.

  As for being pirate - not so sure you have visited.

  My suggestion for you...

  Make sure that your firewall of Windows 7 is activated without exceptions (No. Exceptions selected.)

  Change your password for router something which is less than 15 characters and contains at least three of those four things: letter uppercase, tiny, number and symbol.

  Buy these two products:

  • eSet NOD32 AntiVirus (just the Antivirus, not the sequel) (~ 59 USD/2 years)
  • MalwareBytes AntiMalware (25 USD)

  Uninstall/remove any antivirus/antimalware you use and install these two things, register / activate them and let it automatically update and scan at least once a week (you can schedule scans with both of them.)

  Change all of your passwords online (at least the ones you can) so that they also follow the same rule set (but not the same password) I gave above on your password for the router.

  Keep your Windows operating system and all installed applications UPDATED.

  Backup copy.

• Workgroup computers connected but does not appear in the network folder

  I got number of connected computers on my working group, but for the moment, only 3 of 8 computers appear in my record of working group in my network.

  When I search the names of each computer on the 'Search' from the menu 'Start', they appear and seem to be connected as I am able to access the shared folders.

  The name of the computer, I searched (let's call it 'Computer 1') appears on the left menu under 'Network' with 3 computers that are obviously connected but when I click on network and go into the network, computer folder 1 is still not visible and only 3 computers are indicated.

  How can I solve this problem?

  Thanks in advance

  Hey Kass,

  These computers are on a domain network?

  I suggest to follow the steps described in the article and check if it helps.
  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/en-CA/Windows7/why-can-t-i-see-other-computers-on-my-network

  
   

  Why computers are missing from the network card?
  http://Windows.Microsoft.com/en-CA/Windows7/why-are-computers-missing-from-the-network-map

  Let us know if it helps. If the problem persists, we would be happy to help you further.

• IPhone does not appear as wifi on computer

  J

  What are you talking about? Do you mean that your PC does not see the hotspot of phone? You cannot run 9.3.1 on iPhone IOS 4 as your online profile suggests.

• A network computer does not appear on the network or in the "workgroup computers.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  See my reply to your post later. No need to post twice.
  MS - MVP - Elephant Boy computers - don't panic!

• Router WRT610N does not appear in my network places.

  
  
  

• I have several computers in my house. Using the Gallery live in windows, when I tag a photo of a computer it does not appear on the other computer any ideas what Miss me?

  all photos are stored on a computer with another computer maps to this file.  The machine that is mapped also seems to be to save a new copy of the image in the my folder of photos of each photo with a tag of edition.  Any help would be appreciated.

  Hi Bryanclem,

  The question you have posted is related to the Windows Live Photo Gallery and would be best suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=20

  I hope this helps!

  Halima S - Microsoft technical support.

• XP Cd rom error message, code 19. CD rom icon does not appear in the 'my computer' file and does not read the CD.

  Hello, I have tried everything to fix this problem and nothing has worked. I removed the cd-rom drive and reinstalled, I open my registry and remove the filters above and below the exact file, what I was told. I don't know what else to do, nothing is solved the problem. Please help me, I really need to use my Cd-rom for school assignments.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• external hard drive does not appear

  I have a WDC32 external hard drive that I have used before.  It appears in the device mgr under the disk drive.  It does not appear in any drive computer.  I tried the 2 front (UBS) and 1 in the back and no change.  Bishop says peripheral device works very well and the latest version of the driver software is installed... I don't know, but I thought it was previously assigned to the j: drive, but is no longer is shown... Thanks in advance

  Hi cluess in chicago,.

  1. did you of recent changes on the computer?

  I suggest that you check in Disk Manager if the drive is detected and more later assign the drive letter, check if it works.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.