Device of Storage Pool is degraded and data security is threatened.

Similar Questions

• HP DL380 G6 ESXi 5.5 capable of detecting devices of storage but unable to create data warehouses

  I will say upfront I am newbie and in need of assistance.

  I have a HP DL380 G6 for which I installed iso customized for ESXi with the help of a CD-Rom, installed everything great, no errors, health status shows all green.

  I have 3 hard drives in bays, 500GB, 500GB and 1 TB.

  Sensors see the three connected but in ESXi under storage I cannot see one, could not create a data store.

  My goal is to have a hard disk for each operating system that you are separate, I don't really care about RAID that I think that maybe part of the problem.

  I have attached the photos if someone can help me here.

  Thank you!

  

  

  

  Hello

  first of all, I would like to check if the latest Proliant SPP (service pack) is installed, or at less the systems BIOS, firmware for the P410i, network cards and the HP ILO (if you have a) is up-to-date. Latest version of the firmware of the P410i is 3.30 (B) insofar as I see, you have 3.00.

  Then go into the P410i RAID configuration and check if everything is configured correctly, it. It looks like at least the 1 TB drive and probably one of the 500 GB drives are not configured in the settings of the controller. This is why there is no volume showing in VMWare.

  If you change the configuration in P410i referring to disk/RAID volumes you may need to reinstall VMWare.

  cykVM

• Audio problems after transfer/download site asocoal Kaneva. It worked until the updates have been made? Internet problems now, explore the problems of transfer and data security?

  I was downloading my own music on a social site to Kaneva. They played very well until he had made a few updates. Problems with Internet explore every time I try to play the new songs just downloaded and you hear nothing. The old songs put forward the downloads continue to play very well. I have re downloaded and verified properties of each song, too, was done in the same way! What is a transfer or data of Internet Explorer security problem? The songs play fine on my computer, but will not play when downloading on Kaneva. This happened after a few updates have been allowed on my computer? What is DEP? Please help, we have meetings on Kaneva and this must be resolved.  Thank you!

  Hello

  I suggest you visit the link, below, that might help you.

  http://forums.Kaneva.com/archive/index.php/t-780.html

• Is it possible to export or save my 5 Lightroom presets and keywords/tags on an external storage drive before a wipe program and data because of a corrupted registry? Thank you.

  Is it possible to export or save my 5 Lightroom presets and keywords/tags on an external storage drive before a wipe program and data because of a corrupted registry? Thank you.

  See these instructions for how to move your computer to a new LR and copy things to a backup device until your computer is reformatted, you reinstall LR:

  http://www.lightroomqueen.com/how-move-Lightroom-to-new-computer/

• Documents and data - storage leak (bug?)

  Hello

  iPhone 64 GB, ios 9.3.2 6s.

  The question is:

  Documents and data to develop up to 32 GB (what I saw), as seen on iTunes and the phone ran out of free space.

  This happens already months ago, I did not find any application causing it or either messages or e-mail account, I finally had to make full backup and restore via iTunes to purge this unknown space. I thought that behind me, but still, less than months then after full restore documents and data weight approximately 32GB, that's enough, before I restore once again, someone has an idea?

  I tried everything to locate the space of simple storage up to PhoneClean, safeeraser, iFunBox management screen, I have no idea what is causing this problem...

  also tried google the question, found only on the topics related to applications causing, but I already tried to remove all his apps manually one by one, which did not help

  We hope to get some intel.

  Thank you community

  Try to restore as new, not backup your backup is probably damaged. The fact that this has happened two times points to an application or system corruption in the backup. Then download apps you want from scratch. I had to do it myself in the past, unfortunately, no fun, I know.

• Documents and data with all the storage on iPhone

  A few days ago I tried to send an email with a large attachment. However, it has not been send so I deleted my account from my iPhone. Once I did, I got a message saying that almost all of my storage has been exhausted. I checked to see and I have about 5 GB of available 64 GB. I connected my iPhone to my computer to check which took all this space and 45 GB of my space is being taken up by the Documents and data. I deleted the old messages, imported pictures to my computer and erased, erase my history on safari, check on iCloud, and allows to remove most of my apps that I have read that the removing applications and later re - download. I've also updated to iOS 9.3. It helped very little. Documents and data is now only 43 GB instead of 45 GB. Before that happened, I got about 50 GB of free and now I just 5 GB free after it happened.

  What else can I do to clear more of Documents and data? Should I restore my iPhone to one of the backups that I recorded? Should I take my iPhone at the Apple Store because it happened so suddenly and randomly?

  On the phone, go to settings App > general > storage & use iCloud > manage storage (in STORAGE). Who will provide a list of what applications use data and in what quantity. Tapping on the app with you give the amount of data, the application contains (less himself) and in most cases the ability to delete the application, if you wish. You will not necessarily have to delete the app.

  Once you have completed all the actions, try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

  Also, actually iTunes sync erases some of this possibility.

  One last thing, if you have installed whatsapp, there is a known problem cases that it runs in fairly large amount of data storage.

• Documents and data resuming inexplainable spaces of storage on 6s

  Tonight I plugged my iPhone 6 s (64G, iOS 9.2.1) on my laptop Apple to sync as usual, but the bar of storage on the bottom in iTunes suddenly showed I had 40G of documents and data, which came from nowhere. My audio apps and other things only used to raise about 15G, so this added 40G of documents and data, he told me that my storage was almost full. I changed no settings at all, and when I go in storage in my iPhone, it shows that I used 54.5 G. But underneath, each app store does not add up to 54.5 G. It adds only up to the 15 previous G I.

  Please help; -

  I also have this problem... I have a 128 GB iPhone 6s, running iOS 9.2.1 plugged into my computer today and all of a sudden I have 102 GB of "Documents and data"... very frustrating.

• iPhone Documents and data - storage files do not match

  My iPhone running iOS 9.2.1 6 is showing the storage capacity almost complete when I sync via iTunes on my iMac. It shows (mostly music) data and applications to 51 GB more not less Go 61 of "Documents and data.  And of course, on the iPhone itself under "settings > storage" it shows 112 GB used and only 1.8 GB free.   The problem is, the list of applications and their consumption of storage under this summary shows just the music, pictures and my apps with just the 51 GB total storage.  There is no sign of the 61 GB, nothing for me to remove.  I saw many other threads on this problem and have tried the solutions proposed, including the removal and reinstallation of my email accounts. Also did a reset of the phone together. Any other suggestions please? Thank you very much!

  Did you check the settings/general/storage & iCloud storage use/manage? If you tap the apps listed, you can see the data stored in the "Documents and data.

• Many storage spaces and data for each quarter of the year files

  Hello

  I am junior DBA and I have a question about tablespace partitioning or data file sharing.

  I have a database of 10g in many storage spaces, for example:

  KER_DATA_2009_Q1

  KER_DATA_2009_Q2

  KER_DATA_2009_Q3

  KER_DATA_2009_Q4

  KER_INDX_2009_Q1

  KER_INDX_2009_Q2

  KER_INDX_2009_Q3

  KER_INDX_2009_Q4

  There is also a data file for each tablespace that is mentioned.

  But for this year 2013, only two big storage space I can get one and data KER_DATA, KER_INDX files.

  All tables and indexes in the whole database are KER_DATA, KER_INDX, tablespaces.

  I don't know any cut in two storage spaces and means of data files. Is this something like tablespace partitioning? This can be done automatically or someone needed to do it manually on the end of each quarter?

  This should be done to improve performance, several small files data instead a large?

  Can some admin explain this to me?

  The reason for this separation of database/tablespace was partitioning. There are a lot of tables partitioned by date column, and there are partitions for each quarter of the year. There are tablespace with a data file for each quarter (partition).

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Analyzing XML and data storage approach with OSB

  Hello!
  
  I hope that you could suggest an appropriate approach to make this request.
  
  We need treat and find data in XML files (which are consistent with an XSD) and store them in the database. There is a huge amount of XML files to deal with every day and these files are received through some messaging queues and must also be shipped to different queues.
  
  We use OSB as tool integration approach should therefore be centred OSB. I have now the OSB is able to process XML files through the XQuery expressions and store data in the database (at least to read the data, I don't know if she is able to insert data directly). But the problem I see, is that we have to analyze a lot of data of each XML file, so I think it could be very cunbersome to build all the XQuery expressions in a stadium of the OSB.
  
  Another approach, I thought consist of an MDB that receives XML, JAXB support building process and data stores files in the database. OSB could receive the queue of the original XML files, send them to the queue target as well as MDB to commit processing.
  
  What approach seems most suitable for you?
  
  Thank you.
  
  Daniel.

  The OSB database adapter would give you XSD modeling the tables that you want to insert. You can consider fields of mapping of the input XML to XSD data adapter directly.

  Come discover the database adapter, and you will find them easy.

• T110 II - Windows 2012R2 Storage Pool corrupts every reboot

  Hello

  I have a brand new II T110 and added two HGST sister NAS (6 TB) drives for the drive of 1 TB SATA boot and load 2012R2.  Boot drive works fine.

  HGST both drives are in the detected (Auto) BIOS and Windows can see very well.  If I created a Storage Pool and readers, all is well.  I create the pool, to a mirrored virtual disk and then place a volume on it.  Everything works very well.

  I then reboot the server and the Storage Pool faints and disks show metadata corrupted.  I can reset the readers and recreate a pool and the same thing happening at each reboot.

  HGST reader tool retrieves the two disks and they test ok, so I think that wise things of material should be ok.  Two storage spaces Windows is so broken for discs 6 TB, or there is some other incompatibility with these drives, HGST.

  Anyone who has used 6 TB SATA disks in a T110 II and know all the problems?

  Thank you

  As I do not leave messages without answer, the answer is my server Dell PowerEdge T110 II was also recording event 129 ' restore the device, \Device\RaidPort0, was issued "and 153 of the event" the i/o operation to the logical block address 0 x 0 for disk 2 (name AOP: \Device\00000043) was retries. "for two disks in the pool of storage at boot time.  Apparently, this then causes the shoot to disconnect.  Despite a re-navigate reads correctly readers.

  On moving a channel SATA 2-1 disc (the second disc is on 3) one of the disks is no longer this set at startup and if Windows can initialize the storage pool that he can read the drive meta data.  The two drives appear healthy when initialization is complete.

  No idea why this server records these events because the readers/server otherwise appear very well.  No Intel RST drivers do exist, so there is no way these errors impact software.

  I guess it's a hardware or a bug in the BIOS using discs of 6 to on this server, but there is a solution.

  Of course if the drive channel 1 past default offline there is a chance for the storage pool would not initialize because the drive channel 3 always gets this single e/s on startup error.  But a "Rescan" storage would bring it online.

• account is not found, name, first name and date of birth, but it is not!

  try to allow my sons xbox account after the recent upgrade.  After I have connect and click Yes to give him access he says I need acount.live.com to visit t enter my name, date of birth, but when I visit it and login, my name, first name and date of birth are there.

  
  I'm lost for what to do.
  Any ideas?

  Hi all

  This could be caused if there is no synchronization between the Xbox LIVE account information which are obtained on the LIVE and the information stored locally on your console. Try to remove the profile (delete profile only) and download the album LIVE profile. Here's how:

  How to remove Xbox Live profile safely
  Before to delete your profile, that you know the user name and password for your Microsoft account that is associated with your profile.

  1. Go to settings, then System.
  2. Select storage.
  3. Select all the devices.
  4. Select Gamer profiles.
  5. Select the gamer tag you want to delete.
  6. Select Remove.
  7. Select delete profile only. This deletes the profile but leaves saved games and achievements.
  
  Clear cache Xbox system
   
  1. Press the Guide button on your controller, go to settingsand select system settings.
  2. Select storage or memory.
  3. Storage device highlight and press is on your controller.
  4. Select clear system Cache.
  5. Clear your cache of Xbox 3 times online system.
  
  Restart your console

  Download Xbox Live profile.

  1. Press theGuide Xboxbutton on your controller (large button in the center of your controller X).
  2. Select the option download profile.
  3. Enter the Microsoft account associated with your Xbox LIVE player number.
  4. Enter the password for your Microsoft account.

  
  Let us know in case you need more help.

• Question about several berries in a single storage pool

  A couple of years ago, we bought a PS4100x and that it has set RAID6. We were happy with our performance, but we are running out of storage space. We have recently acquired a PS6000e and PS4000xv that we seek to add to the default storage pool and to give us more storage capacity. I was able to successfully join the PS4000xv swimming like a RAID10 (performance gain) and want to join the PS6000e swimming like a RAID6 (provision of capacity).

  I've read several different positions on the problems of mixture of RAID levels and types of disk (SATA/SAS) and negatively impact SAN performance or downright causing failure of SAN. Furthermore, I continue to find mention of problems with the previous firmware. Unfortunately, I can't find anything current that will help me through this issue.

  My goal is to have the following 3 tables of EqualLogic in the default storage pool:

  • PS4100x (10 k SAS) RAID6 (approx. 15 to)
  • (15 k SAS) PS4000xv RAID10 (approx. 3 to)
  • PS6000e (7.2 k SATA) RAID6 (approx. 11 TB)

  Any help or advice would be much appreciated. Thank you!

  Reference Dell Dustin,

  You can mix both RAID and the types of players in the same pool.  That is supported.  Especially on current FW 7.1.5 and 8.0.2 just came out today in fact.

  When there are several members in the same pool, the data is distributed across members, in proportion to their relative sizes.  If the 15K Member will have only a small amount of data compared to the others.

  Often, when you buy a 15K member is for a specific purpose in mind.  Some of the benefits of faster spindle will be lost for more data on the volume will be on more/more members.

  You can set preferences for volume to R10 to ask more than the volume go.  You can start with the 15K in its own pool.  Later, you can merge the pools.

  If you are satisfied with your performance now and are not the intention of that greatly increases the load of I/O then you can keep them in the same pool and it will be much better overall performance.  Given that the members of the group are working together.

  In addition, during a sustained peak load, the advanced performance load balancer will exchange blocks of one very busy at a less crowded.  This helps out even the load.

  Kind regards

  Don

• EqualLogic storage pool - replication

  I am very new at EQL replication and am trying to wade into white papers.

  I have several questions that I expect to have answered. But first a bit of my setup.

  I have a PS6110XV (firmware 6.05) and one Storage Pool and Volume/LUN serving an ESX HA Cluster. The volume has been created (not by me) to its maximum almost 4.8 TB (high volume) with very little for the snapshots (5%) and local reserve. Common current use is 2.6 TB with a little over 1.8 free to.

  I'm trying to understand my options of setting up this unit as a primary group to replicate on a PS4110E and will have questions. First of all, I grew up the PS4110E in its own group and am able to connect to the local iSCSI of the PS6110XV network. Everything is good with regard to connectivity at this point. However, Im faced with the question if I need to evacuate my volume entirely on the PS6110XV and start over with a new distribution of volume because the primary group fails for lack of space, which according to me is the lack of space that I have to return to the local reserve.

  1 should I a local reserve on the primary group equal to or larger than the part 'in service' of the single LUN on this unit?

  1a. If Yes to 1;

  My current volume on the PS6110XV shows 2.6 TB in use, however, I managed to get my HA cluster up to 1.7 TB. However, the volume on the LUN EQL shows still 2.6 TB of writing that I've previously run. I tried the vm tools to reclaim space, but now it is understand only oriented thin provisioned LUNs. Have I not an option to recover space on the thick LUNS, which should leave me theoretically with enough free space in the logical unit number to perform the initial replication?

  1B. If Yes to 1, not 1:

  Can I add a second table of members (in my case a much PS5000 ELDERLY) to the primary group in another Pool of storage and use to the local reserve of my LUN PS6110XV just to accommodate replication?

  1 c. If Yes to 1 and no to 1A and 1B:

  I have to evacuate my PS6110XV and start over and be smarter with my allowance and reserves to ensure that I consider the replication from the beginning?

  2. looking forward: once I get this configuration I have will locate the secondary group over the WAN. I have a lot of bandwidth, but I am willing to confirm some things. I understand that I can not NAT traffic. Telling me that I have the unique opportunity to set up a virtual private network, or go with a transfer L2. Is this correct? What I am especially struggling here is whether the default gateway of the NIC management or group should be accessible to the remote location. I don't know if I am articulating here and I'm strong enough with the side network, but think I should set up correct routing (not not using NAT) within the correct one iSCSI networks WAN link?

  Thanks for any advice or information here. I really appreciate it.

  JK

  Do not remove the Member.

  First of all I would like to convert the thick volume a thin provisioned volume.  Who will the new unallocated space in the pool of free space.   Supprimer delete snapshots, and rerun the recovery operation.  You may need to increase the percentage to reclaim space.

  Then try again to configure replication for the PS4110.    Once you get the replicated data, you can then move the DR table to its final location.

  Both need access to all ports on both sides.  Then yes a VPN.

  Kind regards