My Satellite M70 no longer works, and caps button flashes

Similar Questions

• My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default

  My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default browser and it would not allow me to change back. I realized that I had something that I had not needed so I tried to remove it. It took a morning full of accomplish this chore. I went back to Firefox and found that my tabs were there, but they were opaque and would not work. In fact, you could read what was beneath them. No way to get anything wthout return to the start page of Firefox. I uninstalled Firefox and put it back on and it was always the same thing with the non operation of the opaque tabs. Troops you have good ideas as to how I can get my Firefox working again?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• FS2004: When I'm at the airport of CYYZ and while that video card no longer works and it gets.

  OK, here's what happens to me at the moment and it makes me already started.

  When I play Flight Simulator 2004 and when I'm at CYYZ or other airports, such as landing or taxiing at the airport like a few minutes, whenever my video no longer works and it retrieves.

  Here is what I did to solve the problem but no results

  • Reinstalled FS2004
  • I have no Add on secernys or something else
  • Tried to lower the settings to min.
  • Updated the FS2004 to 9.1
  Here are my PC specs
  Dell Inpirson 530
  Windows 7 32-bit home
  2.40 GHz Intel Core 2 Duo
  254 MB video, ATI Radeon 2400 or 2600 XT HD (not sure)
  3 GB RAM
  Y at - it something I can fix this, I really hope that if I can fly again.

  Hello Vansers,

  1 have you tried the steps proposed in the above items to solve this problem?

  The link given in the lower part is to bind to the Flight Simulator community to post your question there. The link worked when I tried to open. However, I post the link once more. Here is the link:

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.simulators&mid=2b49ddf8-e33d-4a09-8427-89e003df2878

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• MyFinePix Studio no longer works and try to uninstall it says that ytuploader.dll is still in use

  problem deleting YTUploader.dll

  Someone has a problem with Fujifilm MyFinePix Studio where the process of update no longer works and advise to reinstall the software? If the software is uninstalled it cannot be completely removed because the file "YTUploader.dll" is still used by a program. All attempts to remove this file and the Fujifilm folder that contains the Program Files directory failed.

  Someone has any advice on how to get rid of this file?

  The general opinion of MyFinePix Studio is that he wrote very well and better to avoid, so I now use another Photo management Package.

  Hi RobertKenyon,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• host process no longer works and removes my default printer

  Host process no longer works and removes my default printer.  I need to reinstall my printer software for vista down a few hours later.

  Hello

  -First check with the printer manufacturer for updated drivers and problems as well as their forums (if any).

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  If this did not help.

  I would REBOOT and when the computer stabilizes after a few minutes, and then remove the printer.

  Then REBOOT again and go through this troubleshooting and only after he re - install the
  printer. Be sure to install the latest drivers.

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  ===============================================================

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• I tried to use my photoshop cs program after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it summer more then 30 days so that program do

  I tried to use my Photoshop CS after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it was more long then 30 days if the program will not even start righteous outputs photoshop so I can't use the Help menu - I went to the adobe Web site and logged into my account and it lists my Photoshop CS as. activated in 2011 - which I guess is when I activated it - does - what I do?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• My Flash Player no longer works and I have to download several that he twice daily. What's wrong?

  My Flash Player no longer works and I have to re - download many that he twice daily. What's wrong?

  I checked to see if it is on and it is always. I deleted temporary files. When I try to download it, I always get a message that I do not have enough privileges to complete the download. Then when I check, it still works very well!

  If you are in a corporate environment where you don't have administrator rights on the machine, you should have a chat with your friendly neighborhood computer guy; However, I'm guessing that this is not the case.

  If it's your home machine and you are an administrator, this is a good indication that the file system is damaged.  It is not really good news, I'm sorry.

  Let's start first of all, if you have something important on the machine, now is a great time to save somewhere.  Removable disk, web storage, no matter.  When the file system starts to get wobbly, he could simply be badly timed power outage or something, or it could be a first indication that your hard drive is going to bite the dust soon.  Having lost my fair share of readers, I recommend you to take the warning as a gift and make a backup.  Of this is way less painful than the alternative.

  Once your valuables are secure, and your seat is in position, locked and trained, will search for and fix something wrong with the file system.

  Check your hard disk for errors - Windows 7:

  https://support.Microsoft.com/en-us/KB/2641432

  At this point, take the nuclear option and manually purge every bit of Flash Player in the system.

  (Note: these instructions are for Win7 and lower grades.)  "If you're in Win8 or later, we'll talk more before doing anything.)

  Perform a new installation of Flash Player on Windows:

  https://forums.Adobe.com/thread/928315

  My guess is that you will get to a stage that you can't achieve because you do not have the permissions to do so, even if you * have permission.

  If it's deleting a file, usually a utility like Unlocker will repair it for you, at which point, you can delete the file and complete uninstallation.  It was probably the damaged file.  If you couldn't clean it as admin, our installers have not been able to touch either.

  Unlocker - download reviews and free software - CNET Download.com

  If it is a registry key, you have bigger problems.  There are commercial third-party utilities that are supposed to do magic registry fixes, but Windows includes its own audit of the registry and repair tool which is already not fixing the issue.  I'll leave to you to experiment with those if you want, or if you just want to do a complete reinstallation of the operating system and applications.  Whatever it is, something's wrong with the underlying operating system.  Personally, I tend to be skeptical about the utility of spare parts, and if it has been a few years, you will probably be surprised to see how fast the machine after doing a fresh install of the OS.

  Hope that helps.

• Hi I was told to come to the support with the error number 16... for some reason, my first pro no longer works and I'm still paying for I have but I had to reinstall, which I don't know how to do if

  Hi, I got to come to the support with the error number 16. for some reason, my first pro no longer works and I'm still paying for I have but I had to reinstall, which I don't know how to do if

  Hi Omid,

  Please see the below help document to fix the error 16:

  Configuration error 16. CC, CS

  If the problem persists, please contact support:

  Contact the customer service

  Kind regards

  Sheena

• I design premium cs3 on my old laptop is no longer works and want to put it on my desktop pc

  I design premium cs3 on my old laptop which is no longer work and you want to put on my desktop how can I do this without buying it again once I have on my previous products of the page with the serial key

  If you have any records, you can use them to reinstall.  Otherwise, you can download the demo version of the software by means of the linked page below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Re: Satellite M70-168: new HD and OEM license

  Hello

  My Satellite is out of warranty...
  Original HD (80 gb) broke, and it is impossible to find the same HD.
  I'll replace it with a HGST Travelstar 5 K 750 HTS547575A9E384 - HD - 750 GB - SATA-300.

  1. I think that 2 Sata (sata 300) is compatible, but work to only at speed of sata 1 (sata 150). Is this a problem?
  2. restore the operating system on the hard drive with the DVD created in the first inning, license is OEM allow this work, or block the restoration?

  Sorry for my bad language... Frenchie Frenchie's

  Thank you very much.

  Satellite M70 is old but good laptop and with the new drive HARD and clean OS preinstalled, it should work well. I had it a long time ago and if I m remembering well there connector SATA HDD SATA HDD can be used.

  I think 750GB can be too much and I don t know if it will work OK. Used mine M70 with 320 GB of HARD drive.
  You can test it, but please post comments.
  > Do to restore the operating system on the hard drive with the DVD created in the first round
  You can use the original picture but if I m remembering well that old book has been delivered with the recovery disk (WXP Home) and I put t know what you have created.
  > OEM license allow this work, nor block the restoration
  As far as I know, the license of the sticker belongs to the recovery image and you cannot use it for the activation of the operating system. If you use original recovery DVD that you got with your laptop you don t need. preloaded will be activated automatically.

• Satellite M70 does not work properly with external monitors

  Hello

  My Satellite M70 has problems with a couple of monitors and projectors.

  When I connect to another manufacturer (model AL1721) monitor, the screen remains black, if I connect to another monitor manufacturers (model AL1716) everything works fine.
  If I connect a projector there also is a black screen.

  At first everything worked fine, I had a monitor AL1721 who worked, and 1 day it no longer works. I reinstalled windows, updated video card drivers, but it still does not work.
  anyone an idea why?

  Hello

  How do you connect the monitors and the projector? with an analog or a digital (with adapter) cable to the screen?

  Another question: when you connect your AL1721/Beamer and turn on the machine, you can see the Toshiba logo or something else. Is the error just that occur in windows or the "DOS" screen, too?

  BTW. have you reinstalled with recovery or separated from an original disc of Microsoft windows and the drivers you have installed?

  Questions about the question that could be answered by your help me to help you. ;)

  Welcome them

• Satellite M70 164 - screen freezes and goes black, overheating

  Hello world! :)

  Recently my Satellite m70-164 started to freeze after only a few minutes of work. The picture on the screen freezes, and a few seconds later, it becomes completely black.
  The computer doesn't even have time to warm up, and it's not stop... It's just the screen that freezes and becomes so black. I have to reset the computer by pressing the power button. (I write from another computer).

  I noticed that working time reduced whenever I have reset the computer and after some time it freezes even though I am in the BIOS settings, so I don't think it's an OS problem.
  Even if the computer does not have time to warm up, this suggests it might be a heat problem.
  So I tried pointing a fan this is low (a big, like the ones we use in the summer), and it works without problem!

  With the fan facing these, I reinstalled Windows - so no Virus.
  Laptop fan * not * continue to operate as it is overheating.
  The fan runs and it is not clogged as I've cleaned.

  So if anyone has the same problem, or ideas, please respond!
  (And sorry for my English)
  Thanks in advance! : D

  Hey Buddy,

  I agree with you. In this case, even in the BIOS, that it has nothing to do with Windows or a Virus. In this case, it seems to be a hardware malfunction

  But before contacting an authorized service provider to diagnose what part is the cause, clean your laptop using a jet of compressed air. This should be done from time to time (every 4 months) and, therefore, it of not necessary to disassemble the laptop.

  Check this box!

• Satellite M70-169: screen freezes and meshes + mouse freezes

  Hello
  Hope you can help. So far, I'm impressed by my toshiba satellite m70-169.

  He has recently developed an intermittent fault: when the tilt of the screen the effect of light mesh on it and the screen freezes. The mouse also hangs at this point.

  If I tilt the screen one way or the other I can get it to work properly. A slighy inclination of the screen can cause the screen to freeze again. The problem is getting worse, however.

  The machine has never been dropped or struck, but was taken by one of the screen when it is open.

  I disassembled the strainer and push gently on various points and cables but nothing in this area suggests a loose connection or a weak point. So I believe the problem is in the essence. I tried to open this up but it fails because I didn't force anything.

  Question 1: any suggestions on the problem and possible solutions?
  Question 2: advice like how to open the main part, so I can check any loose cables, connectors or broken bones?
  Question 3: patterns for disassembly?

  Even once - I hope you can help - thanks in advance...

  John

  Hi John

  The above user is right. It s too risky to disassemble the laptop without having any experience with laptops.
  It is why I always recommend taking to a technician.

  But if you want, you can have a look here:
  http://www.irisvista.com/tech/laptops/ToshibaM55/laptop_LCD_screen_removal.htm

  It s a site on satellite M55 and withdrawal screen.
  But once again; You can do everything BUT only at your own risk! ;)