my screen is dirty, what should you use to clean?

Similar Questions

• What do you use to clean your stainless steel mesh band? (Not the watch)

  I don't mean to get instructions on cleaning the watch itself, just the mesh stainless steel strip.

  Any suggestions?

  Julia

  Hi Julia

  The instructions from Apple for the cleaning of your loop Milanese are:

  • Wipe the Strip with a recommended cloth (not abrasive and lint). If necessary, you can moisten the cloth with water bit.
  • Dry with a cloth Strip recommended.

  More "clean and dry your band" here:

  Cleaning and port Apple Watch - Apple Support

• Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp

  Need help, my computer hangs at this message

  Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp

  Hello

  1. when exactly do you get this error message?

  2 are you able to start in the Office?

  3 have there been recent changes to the computer before the show?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful.

• What should I use for a replacement of WinMail in Windows.

  What should I use for a replacement from WinMail in Windows 7 when requires it a number of sites to meet an address or a link that the site offers an answer or a question.  I have msn, yahoo & gmail but lost WinMail when I've upgraded from Vista to Windows7.
  I lost WinMail thur a mistake some time & it was a nighmare tring to meet links on sites that requires to open a format Outlook, Outlook Express or WinMail.

  I have msn (hotmail), yaho & gmail, but none of them will come when I'm trying to respond to the link sites for a response. If one of those that should be used, how it equal in Windows7?

  Windows Update has nothing to do with the upgrade of Windows.

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Oiseau-tonnerre) , and then set it as a default for mail in CUSTOM (<>) Set Program Access and defaults of the computer before any function article send to or MailTo will become available.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  Support for Windows Live Mail (which will be able to import your data from Windows Mail Backup), you will find in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What should I use DC pro adobe acrobat to convert a PDF file to a word document?

  What should I use DC pro adobe acrobat to convert a PDF file to a word document?

  Hi phill79718850,

  You can subscribe or buy Acrobat DC Plans and price | Adobe Acrobat DC to export your PDF files to Word & other supported files formats or you can subscribe to the service https://cloud.acrobat.com/exportpdf to export it to Adobe PDF format online

  Kind regards
  Nicos

• What should you set when you get 'not an apple developer certificate valid' in dps app Builder?

  What should you set when you get 'not an apple developer certificate valid' in dps app Builder?

  You should try to rebuild your developer certificates. That you are trying to use is not valid (maybe it expired?)

  Neil

• What language you use Muse? / What language uses Muse?

  Hello

  Here's my problem: web site hosting offer different offers depending on the language used (PHP, Javascript, Python...). What language you use Muse? Should which plan I choose?

  I called the support who told me that the files are in html5 and css3. But it doesn't help me on the choice of supply to choose.

  Thank you in advance for your answers,

  Solenn

  Hello

  Here's my problem: hosting website offers different offers depending on the language used (PHP, Javascript, Python...). Which language uses Muse? Which offer to choose?

  I called the support who told me that the files are in html5 and css3. But it don't did not help me on the choice of supply to choose.

  Thanks in advance for your answers,

  Solenn

  Hello

  With the help of Muse, you can create a site using HTML/CSS/Javascript coding. All the languages that you mentioned, can work on the site, but you must add them manually. We hear, once your site is ready, you can export your site in html and then you can add any language script like PHP, Python, according to your requirement, so it'll be great if you can decide what language you will use in the future and buy accommodation accordingly.

• What should I use?

  Hello
  I want to create a multiplayer online game with Director MX, but I do not know what server product to use. I was ready to multiple users, when I read that Multi-User has been abandoned for the Flash Communications. I'm so confused, what should I use?
  
  (The play is turnbased)
  
  I have a document on how to use the multiuser server in Director 8.5, I can apply the same documentinfo to director mx?
  IDA

  > was released a new version of the Director
  > but is not supported by the MUS Xtra
  Compatibility issues with the muXtra would imply also questions with tons of
  other (mm and third) Xtras.
  However, problems of compatibility with future versions of operating system - what is risky is
  who will also have to do with several Xtras / existing apps.
  MM has created a version of OS x of the muXtra. But I do not expect that they would be
  create one for the next incompatible OS. On same windows, rear
  compatibility is usually a high priority, so I would say - just a guess - who
  the windows version of the muXtra will be functional for several years.

  'Dave C' wrote in message
  News:e7r566$CC9$1@forums. Macromedia.com...
  > Given what you have said, I think that using a solution Director/MUS
  > should
  > be fine. The game will not simply stop working in a year or two. The risk
  > would be that a new version of Director is out with a few fabulous
  > feature you can't live without, but it are not supported by the MUS
  > Xtra.
  > That doesn't look like a likely presence counts for your scenario.
  >
  > You can consider the educational value of learning of a product
  > who
  > is no longer being developed. Many of the basic concepts that you will be
  > have
  > learning will certainly be useful for you in the future, but the
  > Details
  > implementation of your design using the MUS cannot.
  >
  > Finally, there are problems of license with the execution of the MUSEUM you should
  > be
  > know before continuing.
  >
  >
  >

• To turn off the Recycle Bin so that the files that you delete from your hard disks have gone permanently without having to empty the trash, what should you do?

  To turn off the Recycle Bin so that the files that you delete from your hard disks have gone permanently without having to empty the trash, what should you do?

  Original title: help

  Hello

  Hold down the 'Shift' key when you delete and it bypasses the Recycle Bin.

  See you soon.

• What do you use to track the specific type of mobile devices open your emails?

  Mobile email is on the rise. What do you use to track the specific type of mobile devices open your emails?

  We started to use the Sunflower (Email Analytics - sunflower) this month and have been very happy with it. They not only do report on e-mail clients, you will tell people how committed are with your email address (for example did they spend time reading it or just delete it right now?). They also allow you to track individually, which means you can identify iPhone or Android users and send them a targeted campaign.

• What applications to use to clean the unwanted cache?

  What applications to use to clean the unwanted cache? I doctor battery now, but it would be nice to share some ideas on the subject. IPhone 6, last updated. Thank you

  There is no apps that do this on an iOS device. And battery doctor causes more problems than it solves.

  What problems do you experience that you think you need these applications to solve?

• You have to drive up to 7 pumps separately at 24 v, 0.5 a, with a square of 4 Hz wave. What should I use?

  I need up to 7 separate channels for this so each pump can be driven independently. Can anyone suggest what equipment to use to achieve this?

  George

  You can use the 9474, he needs power external 24V and one of the cDAQ backplanes (e.g. 9171).

  Best regards

• What should I use: Stand by or hibernation mode?

  What is the general Council concerning power options - should I use (default) stand-by, hibernation or shutdown. This could be for 1 hour or overnight.

  I just used stand-by but sometimes all night I hear the hard disk activity.

  I was wondering the general consensus.

  Thank you

  Hello

  Something this two modes:

  Sleep and modes extended recording the State of the computer when it off s. The next time the unit is turn on, the data will be retrieved and the computer's User Interface will appear exactly how it was when it was turned off.

  The difference between the standby and Hibernation mode is the method of saving the State of the system data:
  -in standby mode, the RAM is used to save the State of the data, and therefore, the RAM is always fed in order to maintain the saved state.
  -in hibernation mode, the State of data is saved on the hard disk, in a special file called Toshiber.dat.

  Standby mode keeps the saved state of the computer for only a few days, that is until the battery is empty.
  Hibernation can persist the State of the data indefinitely, but start and stop times are longer than with the Standby mode and require more energy while saving and recovery of State data.

• BlackBerry Smartphones BlackBerry 9780 - screen early failure - what should I do?

  I have a BlackBerry 9780 which I bought from a friend who has improved his own phone.

  I would have gone directly to a BlackBerry of any sort of tesco on contract, but the situation at the time made it difficult.

  I started my contract with O2/Tesco with a Samsung BlackBerry look-alike.  A few weeks later, I bought a BlackBerry PlayBook and realized that get t as the most out of that I also had to have a BlackBerry phone.  Tesco wouldn't let me exchange the samsung I have been more than a month in contract with another 23 months to go.  Then buy the 9780 at my companion, it was really the only option.  Tesco sorted guys my BlackBerry connection for me - fair play to them, they were superb!

  I gave the wife the Samsung!

  The 9780 has been great.  I've used it since about January/February of this year.  My companion had sent it to a repair/refurb, (of course, the central navigation button was faulty), before it was sold to me.

  I noticed that there is a small area that was black on the screen, it looks a bit like a diagram of rorschash, (it is the best way to describe it).  I happened to be in the other day from Maplin and I showed it to a guy who seems to be very well informed.

  He believes that the screen is depixelling or words to that effect.

  I need it to last at least 18 months until my contract is in place, and then I'll renew and get another.

  What is the best couse of action?

  Hello

  as far as I know, the dead pixel or black spots will be little bit greater over a long period of time.

  9700 & 9780 are tough phones, is one of the best Blackberry produced, but he has a weakness

  that is the screen / lcd screen. Sometimes, it gives you a black spot, dead, blank screen of white or black blankscreen pixel.

  the replacement are normally made in China, they have different qualities.

  so make sure that if you take it to a local repairman, you are given a minimum of two weeks guarantee

  It is only a 2 minute job for replaces it, simply remove the 6 screws and 2 clips

  but the problem is that sometimes you do not get a good replacement.

  Once I tried 5 screens before I get a good.

  and once you use a replacement screen, ready to be replaced again after 4 to 6 months if your unlucky.

  Here's how its done

  http://www.YouTube.com/watch?v=t2xkr15QQkY

• What do you use for deploying Windows 7 64-bit Ent regarding vCPU and RAM in your environment?

  Hi guys,.

  In my environment, we are currently running Windows 7 Ent 64-bit with 2 x vCPU and 2.5 GB of RAM.

  Everything is working fine, but recently I just got a free health check of Xangati and would like to know if there is something I could do to improve the environment.

  Essentially according to the results of the audit, I learned that I could be more indicer CPU and RAM on my desk from view.

  My host is running 16 x 2.599 GHz CPU, and according to the report once I hit the hard desk with activities (CPU maxed out at 100% for about 15 minutes), it is said that the "CPU usage" hypervisor uses only 1.9 GHz top.

  This means that a 1 x vCPU is more than enough to handle our daily tasks, so I went down there to 1 vCPU and test it hard once again by Windows Update.

  Even if the use of the "processor" said again that I didn't not max at 2.599 but use the Windows processor is maxed out.

  For me, it's like doing an update of windows on 1 vCPU is slower than when I used 2 vCPU but according to numbers, it shouldn't.

  It was the same exact situation with the RAM.

  If I look in the Windows Task Manager, Windows RAM was maxed out almost when I was doing tests, but on the side of the hypervisor, it says I'm only averaging about 1.7 GB.

  So now I'm not sure what matrix that I should go. The windows or on the side hyper-visiere? Haha.

  If I followed the hyper-visiere, I get scared when their desktop view is slow, the user could come to me and ask for additional resources, because that's what they see in the Task Manager.

  It will be hard to convince them not to worry about what the Task Manager shows.

  Note: I have no problem with the data since all desktop computers store is located in the FusionIO card.

  Anyway, just want to see it as the Deputy there to use when they have configured their Windows 7 operating system.

  Are you visiting x 2 vCPU and 2 or 3 GB of RAM? Or you would follow instead indicating you the numbers of the hypervisor?

  What would you do?

  Thank you guys!

  I feel that it is something that must be determined on a case by case.    We started with 1 vCPU which works great for 95% of our users.    We have others that require more resources while they were transferred in a different pool with additional resources.    In addition, we found that 1 vCPU works well for most everything except the video.   If you want to play a lot of video you can test with 2 vCPU and see if that works better.

  In the end, it's all about what your user comments and should dictate.   You don't want to shake your users of the resources, because that will lead to the decline in performance and the bad perception but also be careful not to approve because they will lead to poor performance and a bad perception.    Once people get a negative perception of the environment, it is difficult to cross.