Alienware 15 R2 fans turn for 2-3 seconds after logging in to windows

Similar Questions

• My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

• Touchpad not working not for a few seconds after I touch it with your finger, then a more...

  I already tried SMC and reset the PRAM, but who doesn't. I found someone with such a similar problem (Trackpad doesn't work sometimes on MBP after upgrade OS X 10.8.2)

  but the measures that seem to work for them do not work for me.

  Thus, as described in the title. the touchpad works very well as long as I just touching with a finger, so scrolling with two fingers or by changing desktop computers do not work. the mouse freezes for a few seconds after I hit with 2 fingers. After about 3 seconds it starts working again.

  If there is someone with the same problem let me know!

  Technical specification:

  OS X El Capitan 10.11.6

  MacBook Pro (retina, 15 inch, mid-2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Video card: Intel Pro Iris 1536 MB

  flash memory: 500 GB

  I propose a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Hi Aubrey,

  Step 1: Put the computer to boot and see if the problem still occurs

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop HP pavilion game 15: stop light stays on for about 15 seconds after stopping

  I have an SSD M.2, when I stop the pc through windows, the power light stays on for about 15 seconds, the laptop does not turn off, but it is strange that the light stays on.

  the problem and do not receive any documented

  any advice would be appreciated

  Hello

  It is normal, in many cases, your charger light will stay longer when you turn off your machine from the wall.

  Kind regards.

• Cannot not left/right, click anywhere for 1-3 seconds after moving the mouse to even. The mouse works fine with all other programs.

  Moving the mouse to any results on the ground in time. For example: when I moved the mouse to the "Détails" box, it was entirely 2 seconds before I saw an indication that I could enter data. What reading mail on Yahoo, if I want to mark an item to move, delete etc. I find the mouse cursor on the box for 1-3 seconds before I can click on the box. The problem occurs no matter wherever the cursor of the mouse is used. (Switch from one tab to another, ranging from one matter of Facebook to another, everywhere!) I should point out that I tried to run my Email, Facebook and all regular applications with Internet Explorer and I have not had any problems at all. I uninstalled and reinstalled Firefox. No help! I like Firefox and use it for years, it's only in the last few weeks that this problem has come. I really don't want change in Chrome or IE, but I can't continue with this problem. I'm not a technology expert, so I hope that there is a pretty easy fix.
  Thanks in advance,
  Chuck

  Sorry I should have to take a look at this earlier, but you have several versions of Flash installed. Having multiple versions of the same plug-ins can cause problems.

  Take uninstaller from here:

  • Windows: http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html

  And install the latest version here: https://get.adobe.com/flashplayer/
  Notice that the link is usually an 'optional' offer for the McAfee toolbar in the middle pane you can untick this box as it is not necessary to use a Flash.

• Firefox seems to hang or take a break for about 10 seconds after selecting a file in a file upload field

  Windows 7.

  This happens on all websites that uses a file entry box to download images/files.

  I click on Browse.

  Select a file, and then click "Open" in the file browser window.

  Then, firefox seems to hang or take a break for what it is between 5 to 12 seconds, after this time, the name of the file appears in the file input field - you cannot interact with the browser at all during this time.

  Can be reproduced every time i run firefox - does not happen in IE or another browser on that machine.

  Can you check this problem on Firefox 9?

  • getfirefox.com

• I get a blue screen for a few seconds after each reboot.

  Can you help me find how to solve this problem? Whenever the computer is now receiving a blue screen of death about 20 seconds after I see all my icons on the desktop after a reboot. I write this in safe mode on my computer.

  EMERALD ASH BORER

  These were related to fsni32. sys that is a pilot of F-secure.  I remove it and replace it with MSE

  You must also seriously update to SP2, without it, you're an obvious target for malware.

  http://www.Microsoft.com/security_essentials/

• Lenovo Z500 turns off a few seconds after the round. He started for the second time.

  Hello

  For several days my Lenovo Z500 is a strange problem. When I push the turn on button laptop starts up and shuts down after a few seconds when the windows logo appears. When I push again the button it starts fine with no problems.

  I have a Windows Professional 10, everything was ok for a while and now I don't know how to solve my problem.

  I'm going to enjoy all the ideas.

  I thought to reinstall Windows, but maybe you know the solution to fix it.

  P.S. I have the latest version of the BIOS installed.

  Kind regards

  Albert

  I think I solved the problem.

  Problem has been activated "quick start" in the power settings.

  To turn off the quick start, follow these instructions:

  1. Open the start screen
  2. type po drank directly on the start screen (power buttons short for). It will take you directly to the applet "change what the buttons to" in the search results.
  3. Click on the link "Change settings that are currently unavailable" to put at the disposal of the shutdown options.
  4. Uncheck the enable (active)-quick start .
  5. That's all. Now the quick start feature is disabled.

  Now everything works fine, z500 boots each time correctly with the first run.

  Thanks LenBlazer.

• Windows digitally errors of signature for the audio drivers, after the restoration of windows 7

  After restoring windows 7 in a laptop asus restore disk of asus assistance, I still had to missing drivers, Wi - Fi and audio. I went to downloadd and site of asus drivers, two drivers, but during the installation I got the error "digital signature failed" and will not install the drivers, help please

  Hi Jorge,.

  What is the model of your Asus system and audio drivers and wireless models? Have you tried to go to the website of the manufacturer of the hardware? (For example, if your wireless card is a card Intel going on their site of drivers)

• How can I get the drivers for my aspire 3100 after that I installed windows 7

  I have a aspire 3100 that came with Vista, I installed Windows 7 and am wondering where I can get the drivers for my system updated. Acer does not list them.

  You must perform a search by yourself great web, many are available on the support page equipment manufacturers.

• Computer hangs for 15-20 minutes after the start of Windows - WinXP SP3

  Whenever I start my computer, once Windows has started (all the desktop icons have appeared), my computer treats something for 15-20 minutes, but I don't know what it is.  It freezes my computer for 15-20 minutes.  I don't have a lot of many software installed and there is no popup windows saying that some updates are being installed.  I have Win XP SP 3.  Can you help me?

  Hi KMForward81,

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Software blackBerry CANNOT CONNECT MY BB CLASSIC FOR THE DESKTOP MANAGER AFTER the UPGRADE TO WINDOWS 10

  Hello

  I mix TRIED TO CONNECT MY BB CLASSIC BB after upgrade to windows 10.

  was a mistake to remove and reinstall Office Manager

  I have uninstall but could not install again bcs of error

  pls advise

  The best

  Yoni

  I managed to install.
  now everything is good
  THX

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• Tecra series fan turns on and off without stopping

  Hello

  I have a Tecra A3 - 185 with processor 1.73 and 504 MB of RAM, which otherwise, I'm very happy for. The only problem (but important) is that the cooling fan constantly turns on and turns off. When the standby power system is turned on high-performance computer (when browsing, emailing or even doing nothing) active fan cooling for 25 seconds it turns off for 20 seconds, is it on again for another 25 seconds and so on.

  There is no even when he uses 0% CPU. I tried to change the power settings so the processor speed is reduced to 3-6 (whatever that means) with some success, but it's not really dealing with the problem all together.

  I had an another Toshiba before without any problems of this kind. Could someone tell me if it is supposed to be like this? (As I'm about to throw the computer out the window close-very annoying with this turn ups-thing) and if it is, give me some settings of the device which will take care of the problem of energy saving.

  Please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23170
  Here, you posted the same.

  Uttered in another thread, it's normal behavior. The fan starts to spin when a certain temperature level has been reached and stops turning when the temperature drops.