my space bar and b n are sopped working. What can I do

Similar Questions

• Suddenly, I lost my ability to press the space bar and get the hand tool. What can I do?

  This is real 5.1 and 5.5 as well as Photoshop CS5 and CS5 indd. All other keys, including my custom commands, are still working fine. I tried to delete the prefs. It still does not. Any help?

  It was noted that all ongoing problem running Chrome browser, you are running Chrome?

• Presario CQ60 space bar and left SHIFT keys not working not

  the week past some of the letter were alittle unresponsive and then yesterday my left move and SPACEBAR completely qiut working any help would be great. I'm on windows 7 if it is a diffrenance

  Hello

  As you mentioned the left SHIFT key and SPACEBAR does not work it means you need to replace the keyboard, as an alternative, you can use the on-screen keyboard or wired keyboard / wireless. To activate on screen keyboad on windows 7 choose demarrer→ Panel→Ease of Access→Ease to access Center.Click the button start the Visual keyboard.

  Chetan 
  I work on behalf of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.

  Click on the STAR of CONGRATULATIONS on the left to say 'Thank you' to help!

• my screen is too far left and I cannot use the contacts and things that are along there, what can I do?

  That's about all I can tell you, I click on channel ' lt points up and down on the left of my page commandes.sur is not centered, and there is a black bar on the side rilght.

  Arlene

  Using a laptop or desktop?

  Try to turn your monitor off and disconnect the power to it and then turn it back on. He do on all or only some programs that you use?

• What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  What happened to the feature to get around on the artboard by pressing the space bar and dragging with the mouse?

  cwalker,

  If it does not, it may be time for the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone.

  I'm at my wits end, HELP ME! I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone! This happened to me several times and I can't ever find anywhere. It just disappears. Can someone help me? I want to know why he spends, how I can solve this problem how can I recover my work and where it went! I blame my laptop or windows or the manufacturer?

  I wrote a full description of my problem, but of course it also disappeared. I type 2-300 words and pooofff they disappear I can't explain it better or go on any more because I just it loose once AGAIN all! I tried to explain in more detail a related problem, but of course he gone too so I send this before I lose too.
  original title: email disappears

  The text turns blue, because you mentioned it.  The most plausible explanation to highlight all of the text while typing is due to hit CTRL-A, which is the same as Edit | Select all.  Then when you type a character when this text is highlighted, then highlighted (blue) text is replaced by the character you typed.  Be very careful to not press the CTRL key instead of the SHIFT key when you type a capital letter A or else which will never happen.

  If your cursor jumps around then also scan your system against viruses and malware.

  Steve

• Desktop SMS and Windows Mail are not working together

  Hello

  thought I'd post here here as having a few issues with my Windows Mail but my desktop computer suffers the same problems and on a Vista forum where I posted my problem a few very useful told me who to try to solve the problems.

  One of them suddenly realized I had said my laptop is a Toshiba, and apparently the Desktop SMS and Windows Mail are not working together so that the person suggested unless I use it to uninstall apparently amongst the technically trained its known that these two programs do not like each other and explain why my office is not the problem but the laptop don't.

  After you have reset the Touch of Windows Mail (tutorial on a site http://www.vistax64.com/tutorials/ vista) wood don't be put off by vistax64 as site 32 and 64 and followed great reset Windows Mail from Brink (do not restore all mail) then uninstalled Desktop SMS and touch of the drink no more mail questions that gave me problems almost every day with marking than reading/sending project messages.

  So had to click forward then remove those bits and complete the email to send and touch wood since doing these two things as soon as send an email to the box shipment or project to obtain the number of emails in parentheses, whereas before it wouldn't happen unless I closed the program and then reopened.

  Hoping that these solutions have solved my problem and wanted to share it with someone else who wants to read this thread and you recommend Vista 64 because they are all very useful there and speak in non-technical terms for those of us not technically trained.

  Debbie

  Thanks for this piece of information. Should be useful for some of us.

• Hi, my camera and video images are upside down, how can I solve this problem

  Hi my camera and video images are upside down, how can I fix this problem

  If it is in Windows (live) Photo Gallery, select the pictures that are backwards, right click, then select rotate (in the clockwise or counterclockwise). repeat if necessary. teengeek.freehostingcloud.com

• I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  Just installed windows 7 but I can't read my product key?

  Help me please thx!

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  Brand

  Online order

  Phone

  Acer

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  1-866-539-3901

  ASUS

  http://eStore.ASUS.com/shop

  1-888-678-3688 or

  1-510-739-3777

  Reference Dell

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen

  1-800-624-9896

  eMachines

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=eMachines

  1-866-539-3901

  Entry door

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=gateway 1-866-539-3901

  HP/Compaq

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&DLC=en&cc=us&OS=4063&product=4057208

  1-800-474-6836

  Lenovo/IBM

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-4M7HWZ.html

  1-800-426-7378

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  Toshiba

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  1-800-457-7777

• I installed the photoshop of 2015 and the icons are huge. I can't use the preferences because the page is too large to navigate. How can I solve this problem?

  I installed the photoshop of 2015 and the icons are huge. I can't use the preferences because the page is too large to navigate. How can I solve this problem?

  Set the user interface of the scale to 100% in your preferences and restart Photoshop.

  

• I published my site to Business Catalyst and purchased and installation by area, but the site can be seen only with the help of a search engine. The site is visible when I type the url address, but can't find a search engine

  I published my site to Business Catalyst and purchased and installation by area, but the site can be seen only with the help of a search engine. The site is seen when I type the url address, but can not find with search engines.

  Hello

  I suggest you sign upward to Google Webmaster tools (free) and check your site (directions are in the webmaster tools) and

  also consider joining Google analytic (also free).  Analytical will allow you to 'see' who is visiting your site and how they experience through research, order the seizure of the URL, or through the links, etc.  Also from where they come, how much per day, etc.  Lots of good information.

  In addition, through this document by google

  Check the performance of your site - webmaster help search

  Let me know if you have any question.

• When I put the time, she can use the internet, she changes the time on the computer and returns on the internet. What can I do?

  When I put the time, she can use the internet, she changes the time on the computer and returns on the internet.  What can I do?

  Not enough information.  You have provided no context.  You don't say what version of Windows you are using and you don't really describe the situation in many details.  Reading between the lines, it looks like you have a child who has time on the Internet you want to limit.  You do not tell us what tools you use to control this limit online, so it is difficult to recommend the right forum for your post.  Please update your message with a more detailed description of what is happening and what you want to do.

  One thing that comes to mind is using Live Parental control with a Netgear router.  See http://www.netgear.com/lpc.  LPC uses the service OpenDNS (http://www.opendns.com/)

• How to stop spooler under app to come and say he has stops working what is spooler subsystem app

  How to stop spooler under app to come and say he has stops working what is spooler subsystem app

  Hello

  1. Since when are you facing this problem?

  2. have you made changes on the computer recently?

  3. when exactly you get the error?

  I would suggest trying the following methods and check if it helps.

  Method 1: Solve printer problems:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2: Clear the print spooler:

  To do this, follow these steps.

  a. click on Start Menu, in the online search, type services.msc and press enter.

  b. in the Services listed stop the service print spooler.

  (c) in Windows Explorer, navigate to the folder below and open the PRINTERS.

  C:\Windows\system32\spool\PRINTERS

  d. click on continue and Yes (if prompted by UAC) to approve the opening of the PRINTERS folder.

  e. remove all files in the PRINTERS folder, until it is empty, and then close Windows Explorer.

  Note: DO NOT DELETE the PRINTERS folder itself. Don't delete its content.

  f. open Servicesand start the service print spooler.

  I hope that helps!         .

• When windows update, the restart may end, it says please wait and won't restart unless I closed it and open it in safe mode, what can I do?

  When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If the problem continues to repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I use Photoshop CS5 ver.12.1. Photos I take in Camera Raw with my Canon 60 d are viewable, but those taken with my Canon 70 d are not. What can I do to be able to view Camera Raw photos taken with both cameras?

  Question:

  I use Photoshop CS5 version 12.1.  Photos I take in Camera Raw with my Canon 60 d are visible and can be worked, but those taken with my Canon 70 d are not. What can I do to be able to view and work on Camera Raw photos taken with both cameras? Y at - it a plug-in that I can use that will allow me to display and work on photos of 70 d and my photos of the 60 d? Helpful suggestions are appreciated.

  The 70 d has not supported until the Camera Raw version 8.2:

  Devices supported by Adobe Camera Raw

  PS Camera Raw versions of CS5 ended with 6.7:

  Camera Raw plugin and Adobe application compatibility

  You have two options: upgrade to at least Photoshop CC or CS6 or get the free DNG Converter to convert your RAWs 70 d DNG for use in CS5. The last option will always require an additional step.

  Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC