My swap file corrupts always after reboot. How can I remedy this?
I have Windows 7 Ultimate 64 - bit Edition with Service Pack 1, all the updates that are installed. For some strange reason, my pagefile always corrupts after restarting the computer and when I start Windows I always get Symptoms "low virtual memory". When I go to system preferences > advanced > Performance, the size of total paging for all readers file is empty and when I opened to change virtual memory settings, no paging file is enabled for my drive.
I tried to boot into the recovery environment, unlocked my Bitlocker drive using my recovery key and by using the following commands:
attrib - r - a s h c:\pagefile.sys
del c:\pagefile.sys
I also made sure using regedit in recovery mode there is no TempPageFiles value.
System Restore is disabled, and I don't want to do a complete reinstall.
I was able to boot into Windows without any problems whatsoever, but this only provides temporary relief from the problem. I have not anything with the installed AFS driver, so if someone could help me to get permanent relief from virtual memory issues, that would be greatly appreciated.
Dear Jan:
Thank you very much for your answer. However, the display on the AFS driver that you can join in the links in the post you want to go to is not relevant to my situation. However, I found a post online via the Google search engine not great and wonderful in which only you have to do to the deactivation of the attributes on the pagefile.sys file, but you must also make a few changes to the permissions of this file too. When I restarted the computer after that I left the repair mode and I allowed my computer to start, and recreate the paging file, the problem seems to have disappeared as I have not experienced the symptoms of lack of memory. I also disabled pagefile encryption on my volume of operating system that I didn't need it because I use Bitlocker. It could have been a screw-up permissions when I tried to do something or the encryption of redundant and useless file on my computer supposedly corrupted the pagefile that she tried to develop and foster growth.
Therefore, the problem seems to be resolved, and I wish you a wonderful day.
Sincerely,
Nathan Koepke
Tags: Windows
Similar Questions
-
Original title: Registery Error Message
During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?
Hello
- What were the changes made before the problem occurred?
I recommend you perform the clean boot.
Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article. -
"InDesign defaults file" error code: 0. How can I solve this. ?
Hi all, I was using InDesign CC for the past 3 weeks, but now at startup... it displays a database error in 'InDesign defaults file' Error code: 0. How can I solve this. ? I tried to uninstall and install. but it still shows. /
Start restore preferences:
Garbage, replace, reset or restore the application's preferences
-
When I start my computer, it makes a very loud beep, how can I remedy this?
WHEN I START MY COMPUTER, IT FACT BEEP LOUDLY, HOW CAN I REMEDY?
Hello
Sound beeps are error codes that describe a problem with your machine. One
continuous beep may mean keyboard (loose or bad cable), losing the card, power, shorts or
Another problem according to the system/BIOS manufacturer. Other models of beep have other meanings
According to the manufacturer of the BIOS.Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - F2 you start - look like usually
for the creator of the BIOS then see here:Computer MESSAGE / beep codes
http://www.computerhope.com/beep.htmIf my computer beeps and won't start, what do the beeps mean?
http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htmPOSTAL Codes beep
http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codesPower on Beep Codes post
http://www.pchell.com/hardware/beepcodes.shtmlIt may have other check so with system Maker or motherboard for custom manufacturer
systems.
I hope this helps.Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I need to give a file a few extra GB, how can I do this?
I need to givea folder two GB of extra space how do I do this?
I hope that you actually talk to a partition that you created with files inside that needs more space.
quite well why the scores should not be used on small hard drives...
You can use the free mini tool to adjust the size of existing partitions.
Moving data like this is risky so back up the hard drive first.
-
Error message - file system error 1073741502? How can I fix this please?
I am running Windows 7 Home premium 32-bit on a laptop purchased.
I used my laptop normally and shut it down last night. This morning, I can not load in Internet Explorer or Microsoft Outlook and when I click on what anyone on the desktop to open it, it does not open. I also notice when you try to shut the computer down that it will not close unless I press the power button. It does not restart either.
I get the file system error 1073741502 and I would like to know how to fix it please?
I tried to do a system restore and the message is that the system restore cannot start.
I wanted to also know if running two different registery boosters and the other has a tweek system is the right thing to do? Should OT I remove the original that always works with the computer. I was wondering if they would be in conflict? also
I have a disk of Home Basic windows 7 here at home. He will be allowed to use rather than the windows 7 Home premium which is loaded on the computer please? as I don't have the original disc already loaded.
Thank you!
Hi Shaelene,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
For reference:
Difficulty of broken desktop shortcuts and common system maintenance tasks
http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
-
After the defragmentation report files that cannot be defragmented:
4 fragments 1.92 GB System Volume Information restore... and a long list of letters and numbers
The reason being, these fragmented files are used at the same time
Defrag is running...
To remove, run disk Cleanup utility, after that, in run, type: cmd cmd
type: Defrag C:
Once thru type: System properties open output, advanced, virtual memory,.
Change button, with selected C:, the value "no paging file", click on set 2 X, close, restart
PC. Go back to xp, in run, type: cmd cmd type: Defrag C:
This time, it'll take a little longer (5-8 min), once its type thru,: OUTPUT
Return to system properties, virtual memory, set C: "let the system handle.
Click on set 2 X, close, close each window & agree to all, once through, reboot the pc...
Do it once in a while, too, it works better with a slave hd with a pagefile on this subject
also...
-
Disk Cleanup doesn't work do not
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
(Try to run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup)
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------
Then, check here:
Disk Cleanup stops working and does not remove the files in Windows
http://www.tips4pc.com/articles/computer%20Troubleshooting/disk_cleanup_stops_working_and_w.htmDrive serious cleanup problem in Windows caused by broken registration
http://www.Winhelponline.com/blog/serious-disk-cleanup-problem-caused-by-broken-registration/Yet an another problem of disk cleanup
http://www.Winhelponline.com/blog/yet-another-serious-disk-cleanup-issue/-----------------------------------------
Good alternative to free - CCleaner - disk cleanup
CCleaner - free
http://www.CCleaner.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Hello guys,.
I am a beginner in the first, just start learning. Creating a project and wanted the project finished as a bluray format, after 14 hours file adobe first pro (not yet) creates all three files above, what to do next? How to play the video file?
Kind advise pls
Here is some info on a free muxing program: http://forum.videohelp.com/threads/295144-Mux-mpeg2-using-ffmpeg
There are others, as well. This research will produce some people: https://www.google.com/search?q=muxing+program&aq=f&oq=muxing+program&aqs=chrome.0.57j0l3j 62.4499 & sugexp = chrome, mod = 5 & sourceid = chrome & ie = UTF - 8
Good luck
Hunt
-
original title: WHAT KIND OF FILE IS EN_WINDOWS_7_PROFESSIONAL_X64_dvd_x15 - 65805.iso
WHAT TYPE OF FILE IS: EN_WINDOWS_7_PROFESSIONAL_X64_dvd_x15 - 65805.iso
Hello
Through my college, Microsoft had a complementary offer for students of computer class download software among several offered on the site: MSDN Academic Alliance Software Center Microsoft.
I tried to download Windows 7 Professional. But I don't know how to download correctly. We offer time-limited from Microsoft. Now, I'm not going to school, so my school can not help me with the download of related issues.
I have this file-(EN_WINDOWS_7_PROFESSIONAL_X64_dvd_x15 - 65805.iso) recorded on in the Temp folder on the C drive of my computer. But I don't know what the right file? Should I burn to DVD? File size is 41.4 MB.
Can someone help me with this? If this is the right file? If so, then can I've burn it to DVD and save it for later installation on my computer?
Prompt response will be appreciated.
Thank you.
YM
By its name, it is the image ISO of the DVD Windows 7 Professional 64-bit (English language).
Depending on the size, (41.4 MB according to you), it is incomplete by many and of no use.
-
I found some information online to open my computer in safe mode, type regedit in the start menu and then double-click HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet n to locate and eliminate the malware file name. Everything was fine until the part of filename to locate because no file name appeared
Hello
Unless you know exactly what you do, in any case you are to change your registry database.
This can make your operating system unusable.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
See you soon.
-
I have the names of duplicate files, what's happened and how can I solve this problem?
I'm so screwed! sigh... I was back up files and moving them from one disk to another... done with thousands of files... it was completely straight and perfect. now, it seems that windows kept multiple files of the same name, same type. Why? How? the only thing different is the size and date related to them. dates are often inaccurate, so I don't know which to keep and which to get rid of. I do not know the extent of the problem, but I know that she completely screwed up all my web files. I've created several sites and it is now a huge problem. -What happened? How should I do? It's weird. I am running windows vista. "never had this happen before." Thanks for any help you can provide. I need.
Hi VICK-TORIA.
I suggest to follow the steps in the article and check if it helps to solve the problem.
http://Windows.Microsoft.com/en-us/Windows-Vista/eliminate-duplicate-files
-
I am lost without these tabs. Help, please.
Press the ALT key, or press F10 to display the Menu bar
You can use one of them to set toolbars to display.
- Firefox '3-bar' menu button > customize > show/hide toolbars
- View > toolbars
Press the ALT key, or press F10 to display the Menu bar - Right click on empty toolbar space
-
I can't use of Youtube, how can I remedy this situation?
I have Norton Antivirus protection and scans lift you own. I have no logging problems on other sites. The only way I can go with success on YouTube is by typing the address, but once I'm there I can't search for videos. Research go nowhere.
Also, I have a smart phone. The phone has no problem go on YouTube and with success the video search.
Please help, I'm at my wits end.
Hi Lemang,
This problem could be caused because there might be a problem with Silverlight, Flash or Java that do not require Add-ons to play. In most cases, ensure that you have the latest updates for Windows, add-ons can help solve most of the problems.
If you use Internet Explorer, then I suggest you to follow the steps below and we update on the State of the question.
The video problems when you use Internet Explorer:
http://support.Microsoft.com/kb/2532294
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
For all windows questions do not hesitate to contact us and we will be happy to help you.
-
I use Lightroom CC 2015 - I just upgraded to version LR ^ and everything worked WONDERFULLY, but last week my gradient and radial filter stopped working correctly, and I'm not sure how to fix this? For example when I click on them to use them, on the gradient filter I don't get the 'line' to 'stretch' (or 'circle' for the Radial filter) in all of my photo? If I select the checkbox at the bottom, to show the hidden region sometimes I see a hidden ares, sbut mostly not.
I'm not sure how to fix this? Can anyone help? Please?
These are my tools 2 FAVORITES in the develop Module. Maybe I was wearing the overuse? Laughing out loud! This is how much I love them.
Thank you!!!
Julie
Press H to see what you're doing and O to see the overlay.
Maybe you are looking for
-
Tecra A4-204: Bluetooth power off
I have laptop Toshiba Tecra A4-204. I would like to know if it is possible to disable bluetooth radio using the software only. It can be disabled using the hardware on the front of the computer switch. He is also an item called "Turn Bluetooth Radio
-
Failed to upgrade to El Capitan, not recent upward. Apple customer support helped me to back up my files on an external hard drive (WD My passport for Mac) nd formatted the hard drive and installed at El Capitan. I have now an empty machine and all m
-
I have only one user on this laptop XP Sp3 and that the user is the administrator but I keep getting locked out of certain activities, telling me that I don't have access and contact the system administrator. It is usually said "this operation has b
-
Update easy firmware Suggestions
Something simple, Sandisk can do in the next firmware update to improve this Sport Clip (without too many problems): Easy: 1) to return to the song played instead of the Main Menu. Treat the guys of circuit breaker; How in the world can people EQ th
-
Cannot open the e-mail since the last update on 09/11/11
This update came just after the new features added to the email. I wonder is there a compatibility issue? The last update was a security update. Is it blocks something perhaps?