Update easy firmware Suggestions

Similar Questions

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• LaserJet MFP M127fn Pro: Unable to update the firmware on M127fn

  Hi and thanks for the support.

  I can't update the firmware.

  I downloaded firmware update and it launched.

  It does not find the printer.

  I'm sure that the rated requirements.

  I can print.

  It is turned on and connected via USB.

  He does not sleep.

  There seems to not be any error/malfunction.

  I tried as an administrator.

  I have some unrecognized devices in Device Manager. Perhaps, which could be related? Something with the USB drivers, maybe?

  Hi mightyiam ,

  Thanks for letting me know. Since you are able to print with the older USB cable, it should not be a problem. Now if you had intermittent printing problems, then it could very well be caused by the cable. If you have a spare a kicking around, you could try, just to exclude.

  As the firmware will not update, I suggest to call our technical support at the 800-474-6836 and inquire about a replacement printer. If you don't care to worry about the update of the firmware, you can decide what you want to do. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you.

• Help! Accidentally updated the firmware of the Laserjet pro 400 with firmware Laserjet CP4525

  Help!  Accidentally updated the firmware of the Laserjet pro 400 with Laserjet CP4525 firmware.  The printer is now just spit out pages and never reaches a State ready for the correct firmware.  I really hope that I don't have it bricked just with a click of silly.

  Can someone help or suggest a way to put the appropriate firmware?

  See you soon

  Glyn

  I got it due sort connect the laptop via USB drivers install and then deploy the firmware.

  I then had to delete and add the printer on our print server.

  See you soon

• Update the Firmware on SG200-18

  I need to update the firmware on the SG200-18 to the latest version. Which of these links, and subsequently, what file I need to download for that (I just need English)?

  http://software.Cisco.com/download/type.html?mdfid=283783779&flowid=24309

  Thank you!

  Hello

  You are in the right place, you want to select the SMART switch firmware.  The MIB are SNMP, so you don't need to enter those unless you have to.  Once you click on the scroll to the bottom of the list and select:

  SX200 Firmware Version 1.3.7.18 
  sx200_boot - 13506.rfb

  and

  SX200 Firmware Version 1.3.7.18 
  sx200_fw_1.3.7.18.Ros

  You will need to update the firmware as well as the startup code.  I suggest doing both and then just restart once.  Note that the startup code requires TFTP to transfer, I usually use TFTPD32 for this.

  We also have a little longer then usual for the switch to reboot when first upgrade you the firmware, because it made some changes to the file system internal to the switch. If you are comforted in you can watch the progress.  Once you start to feel it takes too much time, wait a few minutes and it should come up (I waited for a good number of these improvements in the laboratory).

  Hope that helps,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Failed to update the firmware Sony A7

  I'm updating my ILÇE-7, but the software update twice gave me a failure message.

  In "Reset camera" it gives the 'update is aborted due to an error during the process"

  I have Windows 7, 64 b. Everyone knows the same and what would be the solution?

  Hi pansomon,

  Welcome to the community of Sony!

  We're sorry to hear you're having trouble, update the firmware of your camera A7. Can I ask if you tried using another computer and the same error? In addition, please check the version of the firmware on the camera is running. It could be that the firmware is already updated.

  I also suggest resetting the device to its factory settings before trying to re-download the firmware. And make sure the camera has enough left autonomy (a life of the battery is full or at least 60% is recommended) before updating. Also remember to connect your computer to an outlet and don't set it not on the standby or sleep mode until the update at the end (that interrupts the download process).

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest to your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Update the Firmware Officejet 7310?

  Like my Officejet 7310 and recently took a used for children.

  The network shows Configuration Page printing "Firmware revision: RL7001xNx" on the unit used while my original unit shows "Firmware revision: RL9002xNx '"»

  Is there a way to update the Firmware of the unit used for the RL9002xNx version?

  I'm not finding a way to update the Firmware via the Sites from HP Support...

  Any suggestions?

  Thank you!

  My PC is always Windows XP SP3 but I added three laptop computers for the children and women who have Windows 7 and I had all the HP7310 installation problems or the center of HP solutions on their machines.  Make sure you get the Windows 7 "32 or 64 bit" depending on your system).

  My initial concern about requiring the update of the Firmware has actually been resolved, I think.

  Printer was running very slow and hesitant, I thought could have been due to Firmware.

  Found on another blog the suggestion to clean the sensor 'media' (red laser on the side of the cartridge carriage).  It worked and I'm very happy with the results!

• An error occurred during the update the firmware.

  Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

  Thank you in advance for your help! ... soon a

  If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.

• I had a ' year error occurred when updating my firmware. " -6721 "message to update my airport extreme

  What is - this? What should I do to perform the update?

  Did you solve?  I was able to update my firmware for my Time Capsule airport, but now my two devices for Airport Express, which gave me the error that you mentioned, seem to be "brick" and I can not even time Capsule to recognize after a reset.  I even spent my firmware to see if that was the problem... nothing.

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• Problem with updating the firmware on 40TL838G

  Hello

  I am very happy owner of Toshiba 40TL838 screen (G).
  Recently, I tried to update the firmware on it.
  Next steps in the user manual I tried to do the update of the network. "No new updates available" poped upward. I goggled solutions and came across a manual update of the USB.

  I downloaded the firmware recent Telefilm, coppied to usb (4 GB, formatted FAT32).
  Following the online instructions I have unplluged TV power.
  Plugged in USB. Connected TV to the power and he lit. And nothing happened.

  After 20-30 sec info abut being plugged usb pop uped question I wish to put on the Media Player.

  Firmware: 6.1.0M.1
  MBoot: 00480288
  MFC: 240226

  Any ideas how to proceed with this case.

  Concerning
  SLim

  Hello

  The firmware can be downloaded and updated via the network.
  But as far as I know you need to change the drive media or software update settings can not be started.
  Media Player-> USB media player-> installation
  Then press left or right, and select THE
  Now we turn on the TV
  Insert the USB key containing the firmware and after inserting the USB firmware update information appears on the screen.
  Then choose YES

• Update the firmware, Toshiba TL 838

  I have problems with my TL838, I heard you can update the Firmware and this has solved some of the problems. Where can I find these updates?

  > I have problems with my TL838.

  What problems do you exactly with the LED Toshiba TL838 TV?

• I just bought an iPhone 6plus, I love, but have been told by others never to install updates. That's what they say ruined my iPhone 5, so I'm a bit hesitant to go ahead and install this update first. Suggestions?

  I just bought an iPhone 6plus, I love, but have been told by others never to install updates. That's what they say ruined my iPhone 5, so I'm a bit hesitant to go ahead and install this update first. Suggestions?

  Upgrade and to ignore your so-called friends who have no idea what they're talking about.