My Targus Docking Station works everything except an external monitor. How to fix it.

Similar Questions

• HP EliteBook 857w: docking station HP 90 w, supporting two monitors

  I am currently working with an EliteBook 8570w on a 90w docking station.  I have an external monitor and the laptop lid open for a second, more small monitor.  I would plug a second external monitor and continue to use the laptop when the lid is open for e-mail.  I can't find a definitive answer on whether Yes or no this is possible and what is the best configuration to achieve the desired final result.  Right now, the external monitor is connected to the VGA port.  The second monitor has both DVI and VGA ports so I could continue the path with the cord or an adapter that would work best.  It is best to connect the second DVI or DisplayPort monitor on the docking station?  What installer, if necessary, would allow me to keep the 2 external screens and the open laptop monitor?

  Thank you in advance.

  Hello

  Thanks for joining the Forums today!

  While using your monitor 8570w, when it is connected to a docking station (we tested this using an advanced docking station) there are two valid configurations for three independent displays. You can connect two additional monitors through DVI or only a monitor via DVI and the other through display port. It's using the advanced docking station.

  If one of your VGA monitors should still work the same as above.

  Here is a link to an image of an adapter, you can use to connect via display port: http://img.misco.eu/resources/images/products//100/HWP/FH/FH973AT/FH973AT_6_1600x1600.jpg

  Let us know if you need more assistance.

  Thank you

• What docking stations working with Tecra M9?

  What docking stations work with the M9?

  I know Express Port Replicator, would be the Advanced Port Replicator III but with reduced functionalitiy?

  Are there others?

  What is a port on the bottom of the machine stanadrd?

  Well, the Toshiba dynadock USB Docking Station is an advanced solution for docking with a video controller high performance integrated with a viewing up to three displays simultaneously.

  But I wouldn't send any movie huge signals through the dynadock USB ports because USB ports are not designed for this purpose. You can use the external display for everyday use as a second window or office software of the internet explore.

  Good bye

• Satellite Pro 4030 boots with white screen - works OK on an external monitor

  My sat 4030 pro, Vibrio W98SE, boots to a white screen. When I press the lid closer, or use Fn/F5 it turns black. It works fine on an external monitor.

  Hi Robert,.

  If your screen is displayed correctly on an external monitor, then it indicates that your chip graohics still work correctly, then you the problem must be with the LCD itself, the FL inverter or the connecting cable to the main Board. I would recommend that you contact an authorized Service partner who can perform other tests to diagnose the fault.

  Kind regards

• Dell U2414Hb with Microsoft surface book and the docking station works do not reliably

  I recently bought two monitors Dell U2414H to work with my book surface and surface dock. The monitors to work reliably for a while (sometimes up to 3 or 4 hours) then suddenly one or two will be turned off and the display will switch to the surface for a second book or two and then return to the monitors. Sometimes, the system can go through a unstable stage of switching between monitors and books surface exposure 30 times or more within a period of 5 minutes.

  I have been searching for a solution and found the following page on the Microsoft website that indicates there is a known issue.

  Link to the Page of MS

  I tried searching the dell website, but can't find anything on this problem.

  I'm trying to find out

  1. If it is something Dell know and respect that I live the known problem.

  2. is it likely to be a solution in a reasonable time

  3 should I return the monitors and buy something different.

  Any suggestion would be appreciated

  Simon

  Problem =
  * When the Surface book is anchored and double are connected using DisplayPort multistreaming (daisy chain), one or two screens will not be recognized after restart or power cycling the book surface. In both cases, the resulting no video appearing on external displays.
  * Some displays will expose rip video on the secondary display, what installation using DisplayPort multistreaming (daisy chain).
  * A view not to return to video mode displayed after recovering from power save mode.

  Workaround short term =
  Surface CDM Dock on--> Dell mDP to DP cable--> #1 off DP (DP 1.2) monitor
  Surface book CDM on--> Dell mDP to DP cable--> #2 off DP (DP 1.2) monitor

  Long term = solution
  We still see a lot of questions with our instructors and Surface products. Microsoft is supposed to work on a special connector dongle that enhances the process of link training to increase the power of the signal has negotiated with external monitors. As to when this will be available, which is unknown by Dell.

• HP Elitebook/HP 2013 Docking: Elitebook will acknowledge only an external monitor at the same time

  I have a HP Elitebook that I anchor on a HP 2013 Ultra Slim Docking Station. I am trying to connect two external monitors (the two HP EliteDisplay E201) to the docking - one VGA and one DVI. The docking station is more than enough ports and screens both work if hooked up at once, but I can't bring it to be recognized at the same time. Is there something that I am missing? Do I need a splitter or how to make this work? Thank you!!

  No need to apologize.  If anything, I should apologize because I purge my frustrations with HP to someone also have problems with the HP hardware.  That makes no sense at all.

  Anyway, it seems that the Folio 9480 m will have HD Graphics 4400 * at least *.

  According to the Intel site, it supports up to 3 independent displays, so you're good so far.

  Intel page is very informative, in order to see if you can understand how to operate from here:

  http://www.Intel.com/content/www/us/en/support/graphics-drivers/000005556.html

  Before that, make sure that your port docking station display firmware is up-to-date.  I assume you are using HP 2013 Ultraslim Docking Station.  Look at the Firmware of this page section (find your way to the page "drivers & software" for your product, or use the software for HP do you still, even though I personally do not use them).

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=7089928&swLangOid=8&swEnvOid=4059

  Good luck.

• N5110 display not working, but when the external monitor is connected to come

  My screen does not work and I often hear 8 beeps at startup which indicate a problem with lcd display. But if I connect an external monitor, the LCD lights up also and then I can disconnect the external follow and work with my built-in screen. If I turned off or in hibernation etc the same problem occurs.

  Hi rndb_v,

  LCD screen could be about to fail, or it could be a cable problem. I suggest you try reseating the LCD cable. You can find the manuals here http://dell.to/1n5lDxb

• HP Envy 4 Ultrabook: what docking station works with HP Envy 4 Ultrabook?

  I have a HP Envy 4 Ultrabook, and I want a docing station that works as both a plug-in and plug out. I need to connect a monitor, keyboard and mouse are wireless

  There are two different sets of Envy 4 Ultrabook, but assuming that it is the manual for your:

  Manual

  There is no connector dock hardware on the laptop. Therefore, no nod to the bottom dock is available. The only choice would be a USB 3.0 dock, which feeds the laptop so you should have to plug an AC adapter and a USB port whenever you wanted to 'dock '. So, by doing this it would connect a monitor, mouse and keyboard. A no more than a glance down.

• M6300 with docking station, works only with nvidia display drivers when it is docked in the windows.

  I have a M6300 with FX3600M graphics chip. Native screen resolution on laptop is 1920 x 1200. When I plug in the base of the Samsung monitor that comes with it, I have no video display. On the Samsung's native resolution is 1680 x 1050.

  I get the screen on the Samsung at the start, but when windows starts, monitor turns off. If I remove the video drivers I get the display on the Samsung until I put the pilots back in.

  I know that the Samsung cannot manage the native resolution of the laptop, but if I have the lid closed and rooted, I would think that the laptop would indicate 'anchored im' so lets use this resolution to 1680 x 1050.

  
  

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Windows install doesn't work or is not installed properly how to fix?

  I have Windows xp proff. Windows install worked and it stopped working after some time I can not do the automatic updates and can not install some things, I tried many programs and none of them can help me. Someone at - it an answer for my problem?

  Hi Kathleen,.

  Thanks for joining Microsoft Community.

  According to the description provided, looks like you're not able to install updates or programs such as the Windows Installer does not work.

  I have a few steps, I should help you solve this problem.

  Method 1:

  Try the steps mentioned in this link and check:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Error message "Could access the Windows Installer Service" when you install a program in Windows XP

  http://support.Microsoft.com/kb/315353

  Method 2:

  Try these steps and check

  Let us scan SFC and check if there are any file system corruption.

  1 put the Windows XP CD in the CD-ROM.

  2. click on 'Quit' if the auto-menu appears.

  3. click on 'Start', then click on 'run '.

  4. Type "SFC/scannow" (without the quotes) in the "Open" box, then click on 'OK '.

  Note: There is a space between "SFC" and "/ Scannow".

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3:

  Run a virus scanner and check:

  Virus is known to cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Delete a file called "wre.exe", now two of my virus scanners will not work and nor does internet Explorer, how to fix?

  I took my computer to the shop twice to fix the same virus, and then I got it again. This time, I decided to try to fix myself because obviously they couldn't do it, despite having taken $200 from me.

  my mother gave me Norton antivirus, and its history has shown me where the file kept showing in taskmanager, so I went there and deleted. the virus seems to have disappeared and to a large extent, my computer seems to work but I can't run microsoft security essentials or antimalware bytes. haven't tried my other programs yet, but I know that I can still read PDF files, and I can see my photos. the icon of internet explore doesn't work, I got in line to say things to try to find the file online. whenever I try to go online, or use one of my two antivirus, it tells me to choose a program to use to open it.

  is there anyway that I can fix this? really get rid of the virus? I can't afford to have this fixed thing again, and of course, they are unable to him anyway.

  If you like not what it was, I think it was called xp antivirus 2012 or something similar.

  in fact, its virus programs not only blocking, his block anything that does not use another program to run, like adobe or realplayer. I am sure that it changed something. I'll try this thing to scan in any case, just to see if it finds anything. If it isn't, I have no choice but to do a complete reinstall of windows.

  is there a risk to the installation of an operating system from an obsolete drive severely? as in will be my computer be infected again until he finally update all the way?

  First of all, you can not delete a file by using the Task Manager. You can choose to terminate a process but cannot remove a file that you have indicated above in your initial post.

  Second, you can't have the two Microsoft Security Essentials and Norton installed on the same machine. Conflict reducing your coverage and possibly even cause a blue screen.

  Thirdly, you are unable to open due to the malware programs change you file associations of executable files.

  Fourthly, you have problems to connect to the internet most likely because the malicious software modified your internet connection settings.

  It will be easy to fix if you follow my instructions carefully.

  With the help of a good working computer and flash drive you mentioned above download the four files below save them on the flash drive.

  XpExeFix.reg

  RKill

  RemoveProxy

  Malwarebytes< it="" doesn't="" matter="" that="" you="" may="" already="" have="" malwarebytes="" downloaded.="" use="" the="" one="" on="" the="" link="" i="" provided.="" it="" has="" been="" renamed="" to="" allow="" it="" to="" run="" on="" infected="">

  Now take the flash drive for infected patients. Open the flash drive. Right-click on XpExeFix.reg and choose merge. Confirm the prompt. You should receive a message that the information has been added to the registry.

  Then, double-click RemoveProxy and run it. Once the operation is completed, you should be able to access the internet. If you are unable to run the file go to the step below and run RKill and then return to this step.

  Then, from the flash drive double click on RKill and choose to run it. It may take a while to complete but, just let it run. You will get a window similar to that of the command prompt and must be informed when the process is complete.

  Once the RKill completed, double-click Malwarebytes and choose to install it. Update to update the installation, then run a full scan. Remove any detected object. If you are unable to update just for some reason any run it.

  Post when you have completed these steps for additional instructions.

• My sound on my computer worked but lately it seems to stop working unless I beat type of speaker and now the sound does not work and I don't know how to fix it.

  When I plug in head phones work. and when he came out I had just hit my speakers really hard until she is back now he used no matter what I do.

  Hello Christina,

  Well tell what is obvious, you may well have damaged your material in a certain way - probably 'hit' a wide wire that has already been lost. It's a hardware problem; This site deals with software, for example, windows.

  The kind of help that I could give would be if you have problems with your audio drivers, or if it is a virus or malware that was the cause. But shots on your speakers 'really hard' it makes it seem as if its associated hardware.

  Assistance with the material, I suggest you two sites: Tom Hardware (http://www.tomshardware.com/); and Computing.Net (http://www.computing.net/).

  Best I can do, sorry. Let me know how you fare.

  Kind regards

  BearPup

• After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. How to fix?

  After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.

  PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?

  Rune

  One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.

  A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem.  Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.

• Firefox toolbar is to cover the upper part of one of the Web pages that I use often, so I can't back up my work or open any work previously registered right now. How to fix?

  My toolbar in the upper right corner of my web browser is covering the upper right site that I use often, registration, open and create functions that have unfortunately no other access point I know.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  If the Firefox window is maximized or you launch Firefox mode full screen with the visible toolbar?