my taskbar has become strange after hibernate on windows 7 64 bit

Similar Questions

• Portege M700 falls down after upgrading to Windows 7 32 bit

  Dear all,

  My portege M700 laptop played most of the reliable time.
  However, it was taken very slow sleep after a few iterations of sleep-wake, taking > 5 min.

  I have now installed Windows 7 32-bit, which works very well. Has no problem with the release of sleep. However, on 1-2 times per day now, I get a message that Explorer crashed and must restart. About once a week, the system crashes completely with a blue screen of windows (without core). Most of the time, in seconds to the time that the screen freezes, I hear the fan switch on at full speed (much faster that it never runs normally) and the case becomes hot enough.

  I installed the latest drivers for 32 bit Windows 7 on the site of Toshiba UK.

  Can someone help me to diagnose the cause of these accidents?

  Thank you very much

  Chris.

  Hello

  It is difficult to say what might cause this behavior strange system.
  But you said something about the hot deal and fans begins to spin faster

  It seems that the internal temperature of laptops increases to a higher level.
  A higher temperature may affect the RAM modules and this could be the reason why the system hangs and does not answer.

  What to say that you should check the Win 7 power management settings.
  There are many options that could decrease the performance of the processor and increase the cooling.
  In addition, you should check if the cooling fans are free of dust obstructed fans might not run properly and this would increase the temperature as well.

  Hope this helps you

• Blu Ray does not work after upgrade to Windows 7 64-bit

  Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

  I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

  When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

  Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

  Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

  Hello

  After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

  The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

  Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

  Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?

• Reinstall Visio after upgrade to Windows 7 64 bit

  Hello everyone. I installed Windows 7-64 bit. My upgrade went without a hitch except to reinstall one of my Office programs. I am trying to reinstall Visio Professional 2003, however, my first legal installation disc is Visio 98. Windows 7-64 bit will not install this version, so I'm stuck without a track to upgrade in order to activate properly. How to work around this problem. I tried to join the team of Visio, but I see that they want to get my credit card on which I am not too happy to... Help... Please...

  Thank you.

  E-mail address is removed from the privacy *.

  I know it's late to this thread over 3 years, but I recently found this problem on the copy of my dad from win7 64.

  With success, I was able to install 4.5 Visio standard, Visio 5.0 update and upgrade Visio 2002.  Everything worked successfully on win7, but the older versions had some quirks to fix in the installation process for 2002 to see them on the hard drive and to recognize as valid evolutionary products.

  The main problem is that version visio 4.5 and 5.0 used an old 16-bit installshield Setup program.

  The applications themselves are 32-bit and will be running in compat for windows NT 4.0 mode in win7 64-bit.

  My solution was to get a program that will extract the old cab of installshield used on the cd files.

  The file to extract cd is called 'data.z' and you must check out it in a good location on your hard drive.

  I used the program Universal Extractor from the following site:

  http://legroom.NET/software/UniExtract

  the extraction method used was i3comp.

  Once the records from HD, I created a shortcut to the executable visio in the extracted folder, in the properties of the shortcut I went to the compatibility options and click on it to change the settings for all users.  Here, I did the program running under Windows NT 4.0 and run as administrator.

  I then tested successfully the Visio 4.5 and 5.0 with this method to ensure that any registry or ini file stuff needed by the installer of 2002 would be easier.

  After I checked they were running and working on win7 64, I put in the 2002 Update CD recently bought new by the amazon seller.

  Setup has found the copy to hard disk, and I told it to install over Visio 5.0 on hard disk folder.

  When I launched visio 2002, he asked to activate, I then just let my dad continue the activation process of Visio 2002 update because it was actually him who had bought and she belonged and was installed on his computer.

  He had worked for a couple of hours and finally had put on his machine virtual windows xp win7, but wanted on his real win7 64 bit installation.

  I had the chance to help her for about an hour, and it was enough time to understand the problem and get Visio 2002 working for him.

  I note that there is a point in the installation process when upgrade version wants to find the old copy to upgrade, he will try to get the hard disk and you will almost seem to be frozen, but the style hourglass turns the pointer of the mouse circle will be always moving.  As long as you wait outside it will be eventually find the older version installed.

  Finally, on my father's computer, there are more than 1 million files from different programs and documents to go, after about 5-6 minutes setup are the old copy and continued.

  After it's done only internet activation is required.

  Hope this helps someone.

• Audio Cup after upgrading to Windows 7 64 bit

  I recently updated a workstation reasonably powerful BOXX made from Windows XP to Windows 7 64 bit.  The only thing that does not seem to have gone well refers to audio.  Any application I play audio, it cuts out / falls for about one second every 3 to 10 seconds.  In Adobe first CC Pro and Adobe Audition CC, sounds cuts out.  When I play a video directly on YouTube, he stops and sometimes even lets out a nervous cry, so I don't think its a problem to Adobe.

  Workstation BOXX, with a NVIDIA Quadro K4200 graphics card.  Processors: Two X 5550 2.67 GHz; 12 GB OF RAM.

  Device Manager shows two audio devices / drivers: NVIDIA High Definition Audio; and a Realtek High Definition Audio.

  In case there was a conflict, but it makes no difference, I disabled the NVIDIA driver.  Always cut.

  Interest, sometimes when I have audio playback in Adobe Audition CC on the audio timeline, I can see the time meter stall periodically and restart, not necessarily in harmony with the cuts.  The end of a two-minute audio current reading, audio play is over, but the marker of time has not reached the end of the audio waveform display and moves again.

  None of the above happened before the upgrade to Windows 7.  Thanks for your suggestions, you can provide.

  This sounds like a driver issue, did you test if your hardware is compatible with Windows 64-bit?

  http://Windows.Microsoft.com/en-GB/Windows/Update-driver-hardware-ISN

• HP Pavilion dv7 7077ez wireless for windows 8 does not work after upgrade to windows 7 64 bit

  I have the broadcom card. I have try all the drivers and I still cant install drivers I see on household also setup.rul 342 of the installation error wireless start won't start. What should do?

  Hi Emilinator,

  More than likely HP won't to material support for Windows 8 on any system purchased before October 1, 2011.  Most of the Windows 7 drivers work in Windows 8.

  You can try this pagewhich provides measures to solve the problems of connection to broadband for Windows 8.

  Check out this page to see if your computer has been tested by HP with Windows 8.

  You can run the Upgrade Wizard, which will scan your PC and report on what is currently installed on your PC is compatible with Windows 8.  This guide was updated for Windows 8 provides lots of information which is needed for all those planning the upgrade.

  Good luck

• Runes of Magic will not play after upgrade to Windows 7 64-bit

  Have upgraded to window7 64 bit that I use now the 8 GB of ram

  Runes of Magic was playing on my old windows version but usually install a new

  Get message that windows could not find a version of the game, so I downloaded the patches for the game manually

  Game Launcher now returns but crashes after I selected the game

  Any help would be greatly appreciated

  Thank you

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the full error message or error code?

  I suggest to perform a clean boot, and then try to download and install the game and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note: Runes of Magic is compatible with Windows 7 64 bit

  Reference:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=runes%20Of%20Magic%20&OS=64-bit

  Note: If you still have the problem then I suggest you to contact the game manufacturer.

• Windows 7 has become "not a copy genuine windows 7" after that I upgraded to 10 and downgraded to 7.

  I bought my HP Pavilion windows 7 Tiger pawn in Columbia, Missouri in 2013. I have upgraded to windows 10 in 2015 or 2016 at first (without free of Microsoft Update), didn't like it not and downgraded to 7. Since then there has been a "not a copy genuine windows 7" displayed in the lower corner to Rt. After I responded to solve it 'now' I did know that I have to pay for the downgrade. I found the product key # by 'JellyBean' but it wouldn't work. I contacted Microsoft who sent me to HP that stated that this laptop was made in Middle East and could not help me. (The keyboard is equipped for English and Iranian, I think. I cannot download IE and can't find answers from Microsoft because apparently I don't have a genuine copy of Windows 7! Heck, this computer hp pavillion laptop has windows 7 when I bought it! I even called Tiger pawn and they told me that it was purchased without the installation disk. Help! At the start, I always have this horrible "DNSunlocker" virus/malware.

  Hello Sharon,

  To remove this DNSunlocker, please follow the steps posted by ball the on this link.

  Kind regards.

• My taskbar has become white.

  When I turned on my computer today a load in my user, I see my toolbar was white so I search on how to solve this problem, I could not and when I was in my customize window all the tricks of window 7 has been blackened.

  First see if your Aero turned on or not. To do this: -.

  Start-> Control Panel-> system-> system settings-> Advanced tab-> Performance-> Adjust settings to improve the appearance-> Apply advanced-> OK-> OK

  If still no change and everything is gray in customize and then see if you have updated your Windows then uninstall the update of platform for Windows 7 (KB2670838) and your problem should be solved.

  Before I updated my Windows this month I just checked if Microsoft still offer this update. This is in the optional list. I installed so I thought to manually upgrade to IE10 because he wasn't in the IE9 update list. So I did manually and after that check updates again and to my surprise this update has disappeared completely. I have an old PC as well, and after installing all the updates I still have no problems so far.

• Why a sql statement has become slow after upgrade to 11g database

  Hello
  
  My previous version of the database is 9I and any sql statement are well-developed.
  but after upgrading to 11g database, a sql statement become slowly.
  
  My senior dba friend told me there are a few different calculating methods from 9i to 11g.
  is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
  
  Sean

  The administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
  http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366

  And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.

  HTH
  Aman...

• My taskbar has become white and will not let me click on it

  It seems that the thing when it stops responding and turns white, I think that it maybe because he fired to white. If I freak out for it, the loading slider and I can't click anything. its White shot and I can't do anything and I think theres a problem. Please answer quickly

  Explorer is the question. Taskbar is part of the process explorer.exe only and it does not exist as a separate entity. Try the steps mentioned in my previous post about exploere.exe. If you cannot use the Task Manager, try the key combination to open the Task Manager: Ctrl + Shift + Esc.

  However, if you cannot use the Task Manager, try to clean boot (http://support.microsoft.com/kb/929135) and check.

• Backlight HP become darker after you apply windows updates

  Hi there I have a problem with my pavilion dv6200

  This is the third time the same thing is happening to me. After I install some updates, display DIMM, and background light became darker. When I restart the computer and enter the BIOS, or if I am looking at the screen before I log on windows, backlight is normal.

  Can you help me please? All stable versions of ati catalyst?

  can help:

  http://forums.Guru3D.com/showthread.php?t=371651

  http://adrynalyne.blogspot.com.tr/2012/10/Fix-brightness-control-for-Windows-8.html

  There is a newer version, then V3 mentioned:

  http://leshcatlabs.NET/2013/01/14/unifl-brightness-resolver-updated-till-v4-0/

  Basically, it changes some registry entries, so you can do it manually, if you

  they say 'FeatureTestControl' value depends on the hardware and software of your computer, then you may need to try different values such as:

  0000F940

  0000F920

  0000F900

  0000F842

  0000F800

  0000F000

  0000FFFF

  or another...

  [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4d36e968-e325-11ce-bfc1-08002be10318} \0000]
  "FeatureTestControl" = dword:0000f940

  [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4d36e968-e325-11ce-bfc1-08002be10318} \0001]
  "FeatureTestControl" = dword:0000f940

  [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\intelkmd]
  "FeatureTestControl" = dword:0000f940

• Acer switch 10 (sw5-012) has no audio after update to windows update to birthday

  My Tablet has no audio since the update, everything works fine (for example: his icon and drivers) but there is no sound... I think windows has done that, please help guys, thanks

  Hey brother,

  That's what I did.

  1) go to: http://www.acer.com/ac/en/US/content/drivers

  (2) establish the SW5-012
  (3) in the driver, download the following:

  -Realtek Audio Driver

  -Plate-forme drivers

  (4) in the Application, download "quick access".

  (5) unzip all 3 of these

  (6) find the 3 setup.exe files in each folder to install

  7-restart your computer.

  That should do the trick.

  Also, I would like to know how your camera is done. Mine does not work since the update of the anniversary. Does your work? Do you have a solution for me? I tried to solve this problem for a few days now. I feel like I'm closer. It seems that Acer is not a driver yet to solve this problem for my SW5-012.

• Why my realtek rtl8188su has left work after upgrade to windows 7?

  I just put update vista to windows 7 pro, and during the updates, my realtek rtl8188ru wireless card stop working.  I drove back to before the last update, and it started working again.  What is the cause and how can I solve this problem?

  The first step is to remember the famous words of wisdom: If it ain't broke, don't fix it!

  The second step is to NEVER make an upgrade with anything that did not come from the manufacturer or a reliable source...

  As a general rule, it is best to install only the updates of the security. And you should always stay away from hardware (optional) on the Microsoft site drivers! Chances are the drivers that you are fine just the way they are. If you did not need to update, you should go to the manufacturer Web site the real to do.

  UTC/GMT is 04:14 on Wednesday, February 22, 2012

• Slow download speed after downgrading to Windows 7 64 bit

  Hi all!

  I'm new here! My first laptop is a Toshiba Satellite since 2003. Since then, I got one couple of others.
  Now I bought a new: Satellite P70-A-11V, a portable professional high-end computer, which came with Windows 8, which I upgraded to 8.1.

  Unfortunately, the degraded system so bad that all pendrives made plant. I have connected my Toshiba camcorder, and it also crashed the laptop. The search indexing was not working outside the C: drive. The pointer of an optical mouse has started to freeze for seconds on the screen.

  This last problem, which I think was due to the low power USB ports. So, I really had no choice after 2 restorations system total and installed Windows 7 Enterprise x 64 SP1. The operating system seems ok, but I always have problems, and one of them is that my download speed is very low, as well with LAN cable or wireless. I can't tell how is download speed.

  My internet provider provides 100 MB/s internet access via optical cable. I test on Speedtest.net and normally, it gives a range of 50 to 80 Mbps actual download speed. Then, if I check the speed of the connection Wireless wireless connection status, I experience a maximum of 130 MB/s, which is constant. Large.
  Yet, no download occurs at a speed of wretched 400 to 500 kbit/s, as if it was a dial-up connection. This problem was not present before.

  I tried to change several settings according to the forums, but nothing helped. I disabled the firewall and stimulated wireless (duplex 100 MB) and also tried through LAN cable. The rated speed is great, but apparently the slowness problem is inside the laptop, not outside. Any ideas will be greatly appreciated!

  I checked the Toshiba download page and your laptop is fully supported for Win7 64 bit. Drivers LAN and WLAN are available also so I hope that you have installed all the drivers, tools, and utilities including LAN and WLAN. Can you confirm this?