My tecra M4 think its running xp pro

Similar Questions

• Re: Satellite P100-434: unable to load its running Xp Pro drivers

  I have a P100-434 (SPAD), which is running XP Pro, I decided that I wanted to rebuild the OS because it became very crowded and slow.
  I partitioned the HD and installed a 2nd copy of XP Pro with dual boot, but I find that I can not load the audio drivers on the NEW XP.
  The driver installation aborts and reports NO MEDIA FOUND.

  I checked the driver that I downloaded from the old installation of XP and it works very well, is the sound card and installs the drivers.
  I'm a bit of a loss as to why a vanilla OS install can't find the sound card.

  So can someone point me in the right direction to get sound? (I've reloaded XP twice with the same result each time).

  Post edited by: exraflad

  Windows XP needs * KB888111 * and * KB835221 hotfix * before MS site that you are going to install the audio driver.

  -You must install the two patches
  -Download the Conexant audio driver from the Toshiba page. I found two different versions. I would recommend checking both!
  -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

  Greetings

• Yahoo toolbar has lost and can not reinstall because PC think its always there. Anyone?

  After restarting my computer this weekend, I realized my Yahoo toolbar was missing (as was the possibility of opening a 2nd window). Tried to reinstall the toolbar because my PC thinks I have the latest version already installed. How can I install the fees? Or rather how do I uninstall the missing toolbar so that I can install it then again? I am running XP Pro on this PC. I use the toolbar to access many sites as well as for the bookmarks. Please tell me what I did to cause this so that I can avoid this inconvenience in the future.
  Thank you.

  Amazing! I repeated the steps 4 times Corrupt_localstore.rdf and it worked finally. Done the same every time so that I would know exactly how to rectify if this happens again. And all this time I thought that repeating the same things over and over again and expect a different result, it was the definition of insanity. Although I am crazy but I had a different result, which is the only crazy this time?

  I want to thank you again for the help. I tried to get help of Yahoo and never got a response after receiving the assurance that I would receive a response - soon. It was days ago and nothing yet. You have both responded in hours. (And jscher2000 - you continued to offer advice despite the specific nature of the problem). I am truly grateful. Not only is the back of the tool bar, but has not lost a single application. I'll be sure to recommend the forum at all. Already I suggest Firefox to everyone. Now, I can happily tell them about this.

  Have a great weekend.
  Michael

• I think that my Mac Pro is infected by evil ware. How to ask for help?

  Hello

  I think that my Mac Pro (early 2008) is infected by evil ware. (I deliberately used the Word 2 spelling to try to make a distinction between the entity unknown I think I and - maybe - we can download free software).  I'm not familiar with the various players 'bad', so I'll just refer to it as "my entity."  I think it's a virus that is sophisticated, because, among other things, I think it changes the use/application of Malwarebytes.  A brief description of why I say this.

  I had, before, downloaded and ran Malwarebytes.  I remember well, it's that Malwarebytes did not find any serious problem.  I also ran Sophos, and that he had found two threats, one of which dealt with Sophos.  Sorry, I don't remember their names.  But, as I'm sure you don't know that Sophos takes something like 8-12 hours to run, so I have not used even once, recently.  But, I have not called Malwarebytes on my file utilities.  When I clicked it, I got a window titled users. and that was Apple, comments and shared.  I decided to download Malwarebytes again (but without deleting the Malwarebytes I just described), thinking that the the Malwarebytes nine, well replace the bogus one.  Well, he didn't.  So I can't say that the download didn't happen, or happened, he was immediately converted to users.  So I have 'something' with the title "Malwarebytes Anti - Malware" which is actually the user.

  Another indication: when I want to search, I use Safari or Chrome.  But after I enter the article I'm looking for, I see (something like) kuklorist research of...    If I ask spotlight where is kuklorist?, there is no answer.  So, no matter what kuklorist is, it can hide very well.

  I noticed that the recovery Farbar scanning tool and Malwarebytes Chameleon are available for PC.  Is there something like them for Macs?

  I suspect that the screenshots would help in my descriptions, but I don't know how to make them. I also suspect that I am not to follow the correct procedures in the start of the case.   Could you tell me how to do these?

  @gmail.com

  See:

  What is kuklorest? Something seems to be taken in charge of my browser and assigning to bing

  Also:

  How install (really delete) adware

  Stop advertising and pop-up advertising windows in Safari

  Adware removal Guide: Identification

  When you think yo are done r

  Run and view the results here so that we know more about your configuration.

  EtreCheck

• Restore the computer to its factory XP Pro status update to SP3?

  I am running Windows XP Pro SP2 on an old but still functional machine.  Despite several attempt I can't get bugs
  the update SP3 to work... it seems to be installed, but I can only boot Windows Mode without failure.  At this point (and for other reasons), I want to restore the original sound, out of the condition of the area of a disk image.  Since the end of support for XP Pro SP2 and lower ranks, when I've restore the machine to its original state Pro XP will I still be able to use Windows Update?  I have Windows XP PRO SP3 update on a disc.  Of the State of origin of machines, can I just install SP3 using this disc?

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

• I am running Acrobat Pro DC under MacOsSierra and when I want to scan a dokument I can´t choose the option request to the digitization of additional pages. Why?

  I am running Acrobat Pro DC under MacOsSierra and when I want to scan a dokument I can´t choose the option request to the digitization of additional pages. Why?

  Lars Andrae

  If I'm not mistaken you use ICA scanner. This 'Still Prompt pages' option is not available for ICA scans from now. But we are working on that, and will soon be available. I'll put you once its available.

  For now please try the TWAIN driver.

  Thank you.

• Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all the other programs of cloud of 2015 but not PP2015.

  Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all programs of cloud 2015 but not PP2015. When I got this error, I had a mid-2012 Mac Pro running El Capitan 10.11.2 and an Apple ATI Radeon HD5770.  You can't update the drivers with Apple, but El Capitan should have giving me the latest video drivers.

  First try to open but after loading everything it errored out with the "can't find a video playback device adapted." A very cryptic message in my way of thinking. They mean the monitor, video card or what?  In any case, I decided that I must have my video card, so I bought a 4 GB Nvidia GTX 970 MacCards.com card, put it in and got the latest drivers for it, than MacCards.com current guard.  This resulted in no gain. Always the same result right along with the exact error even after loading the PP2015.

  I reinstalled PPCC2015 yesterday and it still loads but never opens and gives me the same error.  I feel like even if I bought a new MacPro and reloaded all software CC, I'd still have the same result. Very depressed of not being able to run the software I pay for every month.

  In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

  In this folder, go to preferences and find the adobe folder.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  Then relock the lock.

  Now, go to your OS hard drive and click on users, your user name, Documents.

  Find the adobe folder there.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  The lock, the lock again.

  Wait a minute. Then launch first.

  This fixed it for me.

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• How can I determine if I am running XP Pro 32-bit or 64-bit?

  How can I determine if I am running XP Pro 32-bit or 64-bit?

  How can I determine if I am running XP Pro 32-bit or 64-bit?

  In general, with Windows XP, if you have to ask what architecture you are running: you are running Windows XP 32-bit.

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  1. Click Start.
  2. Do right click my computer and then click Properties.
     If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.
     If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

  Another surefire Tip: If your system is fully patched and you have SP3 - you run 32-bit.  64-bit has only until a SP2.

• I am running XP Pro on my Dell Inspiron E1505. My wireless switch is 'off '. How do I turn it on?

  I am running XP Pro on my Dell Inspiron E1505. My wireless switch is 'off '. How do I turn it on?

  Your manual is here...

  FTP://FTP.Dell.com/manuals/common/Inspiron-6400x_owner%27s%20manual_en-us.PDF

  Extract from page 74...

  Enabling/disabling the wireless network adapter

  NOTE:

  If you are unable to connect to a wireless network, make sure you have all the components for

  establishing a WLAN (see "What need you to establish a WLAN connection" on page 70), then check that your wireless network card is enabled by pressing on .

  Tricky

• Computer seems to do a lot of thinking before running each statement. There are files missing or damaged?

  Original title: is there a way to know if my copy of windows is missing files, etc?

  My computer seems to do a lot of thinking before running each statement checked upload / speed download, everything is fast, must be my corrupts, could be operational with missing or damaged files, anyway to check?

  Hello

  1. Are you referring to the performance of the computer?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  You can also refer to:

  Maintenance tasks that improve performance.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

• I am running xp pro so why they ask me to activate Windows 7?

  activate windows 7?

  I am running xp pro so why they ask me to activate Windows 7?

  XP has been activated years ago? now, they say both need equipment to enable the garbage.

  There is nothing wrong with your report that I can see - so you should not receive not authentic or notice of activation.

  The notification came at one time and then disappear later?

  If Yes, then it is probably due to a "race condition", where two programs or more are fighting for the possession of a file--in this case, it prevents the system WGA, checking the status of the operating system, resulting in the notification. A plus later re - test then clears the air.

  The addition of SH Devolo may have been the straw that broke the back - is the amount of RAM on the system? XP SP2 requires at least 512 MB for a reasonable speed, so if your system has less, I'd say you are trying to upgrade if possible.

• I have problems to connect to my network wireless computers in my house running XP Pro.

  Hello. I have problems to connect to my network wireless computers in my house running XP Pro. I set up my wireless router to use WPA - PSK encryption. When I type in the passphrase on computers running XP in my house, I get an error message indicating that the password must be 5 to 13 ASCII characters or 10 to 26 characters in hexadecimal. It doesn't even seem like it checks the password. The error immediately.

  I tried to connect to the network using my work running Windows 7 laptop and it works fine. Any help would be appreciated. Thank you.

  original title: cannot connect wireless

  Go, I tried and it worked was that you have to be sure what parameters you have set when you set the security of your are wireless (for example the Type of security, Encryption Type etc.) and they have to be compatible with the version of your laptop.
  Older versions usually have 64bitWEP or WEP 128 bit and newer versions have WPA, WPA2-Personal (PSK).

  The 64-bit and 128-bit require 5 or 13 characters. These characters can be obtained when you configure the wireless (it will ask you to put the characters and the characters will be automatically converted to hexadecimal characters, which it must be remembered that they are the password wireless).

  WPA or WPA2 - Personal (PSK) are easier to implement and the passwords are normal characters that you want it to be.

  Then go to your security wireless set up the page and re - configure the password or the type of network and it should help

• I am running XP Pro, and my taskmng has without tab click!

  I am running XP Pro, and my taskmng has without tab click!  (ctrl, alt, del.)

  Just a window with what is running. (tabs - performance, network, etc.).

  Anyone know how to recover the clickable part? I reinstalled Win XP, I ran a Windows File Checker.

  I have a page if I find a place here where I can download for better communication

  C:\Documents and Settings\HP_Owner\Desktop\2011-04-30 23 25 16

  http://www.mydigitallife.info/Task-Manager-tabs-and-menu-bar-missing-or-disappear/

  Your turn :)

• Message in the event viewer running XP Pro with SP3 get following: 7026 ID: start system or boot start drivers following could not load: nvatabus nvraid. How can I fix it?

  Get the following in the Event Viewer error message have had this message for quite some time

  ID 7026: boot start or system start following

  driver (s) failed to load: nvatabus nvraid. How do I

  This difficulty?  I am running XP Pro SP3. Would appreciate any help in this matter.

  Hello

  · What is the number and the model of the computer?

  · Remember the recent changes on the previous computer o the question?

  The problem is related to the display driver installed on the computer.

  Check the status of the card/video display adapter installed on your computer.

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, look for the screen reader and expand the drive, double-click the sub element to check if an error message or error code is listed.

  See the links below: http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=7026&EvtSrc=Service+Control+Manager&LCID=1033

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658