Computer seems to do a lot of thinking before running each statement. There are files missing or damaged?
Original title: is there a way to know if my copy of windows is missing files, etc?
My computer seems to do a lot of thinking before running each statement checked upload / speed download, everything is fast, must be my corrupts, could be operational with missing or damaged files, anyway to check?
Hello
- Are you referring to the performance of the computer?
- What antivirus application do you use?
I suggest you try these methods and check the status of the issue.
Method 1:
Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
Method 2:
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
You can also refer to:
Maintenance tasks that improve performance.
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance
Tags: Windows
Similar Questions
-
Original title: user profile
My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button. I ran a virus scan and spyware scan in my user admin profile and he has not found anything. I don't know what to check.
Hello rhunter15,
There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.
First of all, we run System File Checker to see if you have a corrupt file system.
- Click Start
- Click on all programs
- Click Accessories, and then right-click on the command prompt.
- Select the Security tab and choose "Run as Administrator"
- Click on command prompt
- Type SFC/scannow.
It will scan and repair any damaged operating system files.
To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem. For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.
KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
http://support.Microsoft.com/kb/929135Once you have finished the clean boot, check again and see if you get the error of parental control.
If please post again and let us know if that helped pinpoint the problem or if you still need help.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Allowing computers
There is no such list. You can do this:
Exercise
You can disable allow individual computers, but only using these computers. The only other option is to allow "overall" your iTunes account.
1. open iTunes on a computer
2. from the Store menu, choose 'View my account... '. »
3. sign in with your Apple and the password.
4. under 'Computer permissions' select ' All of authorize.
5 allow each computer you have, you might need.
You can do this twice a year.
After you 'off to allow all' your computers authorized, re - authorize each of them according to the needs.
If you have authorized out of all computers and had to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - contact us.
For more information on the authorization and permission removal: iTunes Store-Authorize or remove approval from your Mac or PC.
-
"Your computer seems to be offline" when you try to run Photoshop elements 14
Hi, I downloaded a trial of 14 Photoshop elements successfully from the Adobe site, but when I try to launch it, it says "your computer appears to be off line, causing a connection error. An internet connection is required. "Clearly, I have a connection or couldn't have downloaded! Can anyone tell my why he thinks that I don't have an internet connection, and how do I get the download to run? See you soon.
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Original title: cannot start my computer.
My computer seems often quite slow to startup or closing down. However, recently I have problems starting, it. He often asks me to start repair. It is a common problem for Vista and how can it be solved?
Hello
· Have you tried repair system running on the computer?
· Are you able to boot on Windows?
· You get the error message?
· Were there recent changes made on the computer before the show?
Follow these methods and check if that helps.
Method 1:
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. I suggest you to run the Startup Repair tool.
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
Method 2:
Step 1:
Check if you have the similar problem in Safe Mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
Follow the article to perform the clean boot on the computer:
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135
Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.
Method 3:
I suggest to follow the steps described in the article and check if this can help resolve the issue:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
-
I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone. The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?
Probably there is debris and dust in the decision-making of the lightning. Serve with compressed gas canned (NEVER orally). If this doesn't help, try electronic contact cleaner has a q - Tip. Finally, take it to Apple.
-
Windows 7 Ultimate computer seems to have stopped, head HD not seeking chkdsk errors
Last week, I look at a the news on Youtube. Turned away from the computer, came back and heard a strange clicking noise. I listened closer and could hear the hard drive heads look back. It sounded as if the head arm was moving inside the trays and then swing to the outside several times.
Click on the reset button and the computer would not start, error says no bootable disk found. Turned off the computer, went to retrieve another new drive and create a bootable stick from my WHS server. Come back I would try once more thought, and the started computer. A ran Chkdsk with the option of scanning and repair bad sectors. He found a no mistake. A few days later the computer slowed to almost a complete stop, (non-response) error in the program I was using (Firefox). A ran chkdsk once more on the C drive and found 24 index who needed compensation, but that it has been.
It is an i7 2600K cpu @ 3.40 ghz 3.39 Ghz, 16 GB ram, and two 3.5 "HGST (Hitachi/Western Digital) drive 500 GB which is about 5 years old now.
Even if Chkdsk reports no errors, I always suspect that the drive has failed. As I looked at the scan of glomeruli that it suspended or 20 seconds in two places. First to around 1100 groups then back to 14 000 clusters.
I have a new Seagate drive custom quality company. The chkdsk seems to mitigate the problems, but I know now that I'm running on a ragged edge and she will soon be a serious failure.
I suspect it's the same story horror IBM-Hitachi again. Readers are not mounted tight, there is a lot of space around them. I don't think overheating is the problem.
Your contribution is appreciated.
Hi Donald,.
Please answer these questions to better understand the issue.
- What is Windows 7 connected to Windows Home Server?
- Is the computer on the domain or server network?
You can deal with this problem due to the hardware failure. Looks like a bad impact on the hard drive. If it is under warranty, save and send it for repair. (If the computer is under warranty, send it - withdrawal of the drive will void the warranty.) If it is not under warranty, reinstall the drive (after saving).
Make sure you do, save it before he gets defective.
There are two hard disk problem physical and non-physical. If your hard drive sound like it, its may damage on your hard drive. First of all, you should be do is keep and back up your data and then remove those hard with the new drive. Do not use again this type of hard drive that will cause the problem in the future.
Follow the steps in this Microsoft KB article and check if that helps:
Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286/en-us
Antivirus warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this helps. If you need help with Windows, let us know and will be happy to help you.
-
Computer seems infected by a virus
I am running windows xp family.
my computer seems infected by a virus. She runs very slowly and I'm unable to access the internet or some programs easily.
I get the warning message 'disk C is full, there are 0KB available"asking me to free up space by deleting unnecessary programs.
When I try to do, I get the message "disk C is full, there are 0KB available!"in the past I had McAfee and more recently Kaspersky pure, which seems to have expired in the beginning. I tried to delete these two programs in order to
(a) free space, and
(b) remove the security programs to download avg or something similarWhen I turned on the computer, I get the error message
"ms visual c ++ runtime library runtime error." programc:\programfiles\audible\bin\audibledownloader.exe2
followed by
"requested the runtime to terminate in an unusual way.I also get
"Download Manager for audio content has encountered a problem and needs to close."also when I try to open the internet, you use Mozilla Firefox, I get the message "unable to access the internet, please restore the page.
any help or advice on how to remove unwanted programs in order to free up space would be welcome.
I can't find the original disc of windows or any disk recovery
Unfortunately, I'm not very familiar with computers, so please try and help in the words of one syllable.
Thanks a lot john allen
Try to download and run the full scan of the system with:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
If you received any error, try using another PC which is clean and upload it to removable media (for example, flash memory) and turn on your PC and press the F8 key several times and chose safe mode, then press on enter and then insert your removable device and run the tools and run the full scan of the system.
-
Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.
When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
2. my IP address, DNS, subnet mask etc are set to automatic.
3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
4.I ' installed the drivers to date of 2014 on my laptop.
5.I did a lot of searching the web, but they do not solve my problem.Please help me to solve it.
I appreciate your help.
Thank you.Hello Hall,
Please keep us updated on the status of the issue.
I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:
Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
http://support.Microsoft.com/kb/2779064/en-us
Hope the helps of information.
Please reply with the results, in order to help you solve the problem.
Thank you
-
I seem to have a lot of mistakes "not responding" it's common
There seems to be a lot of this "not responding" errors that I met with WMP. is this normal, if not, how can I fix this problem.
Hello
I see that you are facing problems with Windows Media Player.
It is not common there must some problems happen.
When exactly do you get the error "not responding"? Is - this random?
Try the following methods and check:
Method 1:
Step 1:
You can run the Windows Media Player Library convenience store & check if you are able to rip CDs.
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
Step 2:
Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-TroubleshooterMethod 2: Rebuild the windows media player.
exit Windows Media Player.
b. click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click on OK.
c. Select all files in the folder, and then click delete on the file menu.Note:
You don't have to remove the folders that are in this folder.
c. restart Windows Media Player.
Note:
Windows Media Player automatically rebuilds the database.
If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
exit Windows Media Player.
b. click Start, type %LOCALAPPDATA%\Microsoft, and then OK.
c. Select the Media Player folder, and then click delete on the file menu.
d. restart Windows Media Player.Note:
Windows Media Player automatically rebuilds the database.
Method 3: re-save the files associated with Windows Media Player. To do this, follow the steps below.
a. Click Start in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.
b. at the command prompt type regsvr32 wmp.dll , and then press ENTER.
Type regsvr32jscript.dll , and then press enter
Type regsvr32 vbscript.dll , and then press enter
Restart the computer and check if the problem is resolved.
Method 4: The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.
You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:
How to use the System File Checker (SFC) to search for missing or damaged system files in Windows 7
http://support.Microsoft.com/kb/929833
I hope that helps!
If the problem persists, or you need help with Windows let us know.
-
the software on the remote computer seems to be incompatible with this version of screen sharing
Hello
I use Apple Remote Desktop (see 3.8) to a MacBook Pro 15 of the retina to access an iMAC 27 5 k. I get the following error message
"Connection failed for 'iMac_5K'.
The software on the remote computer seems to be incompatible with this version of screen sharing.
MacBook pro screen resolution is 1920 x 1200
the iMac 5K resolution is 3200 x 1800
Thank you!
Hemdani
What is your question? The message seems pretty clear...
-
Everyone,
I'm trying to configure the WIndows server. I am running the following: Windows Server 2012 R2 Foundation.
I did the following:
1. I crossed the Config Wizard on domain Active Services and installed it.
2 then I joined the field. When I reboot the server, I get the following error:
A. "your computer seems to be configured correctly, but the unit or".
"resources (DNS server) is not responding.
A1. When I put a static IP address on DNS, I can't go to the Internet. Even if
I can go to the tank and the PING of the IP address and everything is good.
A2. The I change the DNS to get the IP address automatically. Then I can get to
the fine of the internet, but I still get the same message about a problem with the
DNS server.
Can someone guide me please what the issue is here? Thanks in advance.
3. Furthermore, I can't see the new server name/information when I go into Windows Explorer
as part of the network.
A. I'll go in Windows Explorer and see the other machines when I look at the network level. Yet,.
for the that set up simply, I can't find it, please help.
Thanks in advance.
Jerry
Hi Jerry,
I would like you to post your question in the forums TechNet for assistance:
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
I hope this helps.
-
My computer seems to be not very hot lately. What should I do?
I had questions 'freeze' screen lately and the bottom of my
computer seems to be very hot, what could be and what can do?
The inside must be dusted regularly semi. The system overheating very quickly will be a build-up of dust. Is this a desktop or a laptop?
-
Every day my computer seems slower, what should I do?
every day my computer seems slower, what should I do?
Hi Rebecca,.Your computer may be infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove most malware infections. I hope this helps you.-Brian -
I got a DVD9 Power on my computer, and the folder is now empty. I think that I transferred to a vlc file. How can I check?
If you know the name of the file, you can search for it: http://support.microsoft.com/kb/308895
You can also try searching the *.vob files.
Maybe you are looking for
-
Hello community! Need help, I want to use two routers to establish two separate wireless networks on a cable modem connection. I searched for my answer and see some other threads on this topic, but all are either a bit too technical for me, are inc
-
How to change the color of the graph automatically
Hello I want to trace several graphs with different colors. I wrote a program that performs the calculations in matlab even can trace in it, but I would like parcels to labview, it turns the color of all parcels is white. Can someone take a look at m
-
I can not open the page for my transfer of ports linksys
I put my ip address in used open upward to set my portforwading to play the ps3 game to get my nat type open
-
Windows Live Photo Gallery screensaver does not extinguish whatever my power settings. This is the case with Windows Live Photo Gallery. When you use any other screen saver, the screen turns off according to the way in which the power settings are
-
Hey guys,. The switch integrated on a PIX 501 will freely forward traffic between devices plugged into it, as long as they are on the same subnet? I assume that the answer is Yes. If so, is it possible to isolate one device other network traffic usin