My ThinkCentre does support Sata 3?

Similar Questions

• Probook 6460 b does support sata 6 GB/s?

  My SATA III SSD only works with SATA II (3 GB/s) transfer rate in any SATA port (hand, upgrade Bay, E-SATA). Is this a limitation set by HP? Or is there something I can do from the setting in the BIOS (I can't find any more)? Update BIOS F.25

  This topic/request was not answered to the last post and I have no confirmation. Can anyone help?

  http://h30434.www3.HP.com/T5/notebook-hardware/does-ProBook-6460b-support-SATA-6Gbps/m-p/1417315/HIG...

  Product: HP Probook 6460 b

  Chipset: Intel HM65

  BIOS: F.25

  OS: Windows 7 Ultimate 32 bit

  HARD drive: Samsung 830 128 GB SSD SATA III

  http://www.Intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-HM65.html

  what it you ssd? or it doesn't matter?

  in this thread

  http://Forum.crucial.com/T5/solid-state-drives-SSD/EliteBook-8560p-crucial-M4-256GB-results-normal/TD-p/89564

  the user can get sata speed with crucial when m4 III restored to f.20

• Satellite Pro C850-1EQ does support Sata III?

  I just got a new laptop Satellite Pro C850-1EQ and seeks to replace the slow drive 5400 RPM with an SSD.

  I can't find this machine anywhere - SATA specifications it supports Sata III (6 Gb/s)?

  Thank you

  Gareth

  Hello

  As far as I know, that it supports SATA II (3 Gb/s)
  But you could install some software like diagnostic tools * SiSoft SANDRA *.
  This would allow all of the details about the hardware configuration.

  Could you confirm that its SATA II?

• Satellite L750 does support sata III controller 3Gbs or 6Gbs

  Hello!

  I intend to buy laptop [Toshiba satellite L750-16V and change the HDD SSD Intel 520 series sata III (6 Gbps).]

  Is the sata controller transfer mode of sata III (6 Gb/s) data, or if it'll work in sata II (3 Gb/s)?
  [Chipset Mobile Intel Express HM65 | http://www.intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-hm65.html] supports Sata 6 Gb/s speed, but what will be the actual speed if I run the SSD speed test?

  Thanks for the replies!

  Hello

  > but what is the actual speed if I run the SSD speed test?
  I think it depends on the SSD drive.

  I have read some tests on the Intel SSD 520 series and it seems that the performance of the SSD drives benchmark was of about 480 Mb/s

• Satellite M70-340 does support SATA 300 MB/s?

  I want to replace the original with MK1237GSX MK6034GSX hard drive. The difference is 150 and 300 MB/s transfer rate. will be mk1237gsx works with my M70?

  Hello

  The Satellite M70-340 was delivered with the 60 GB SATA 5400 RPM HARD drive.
  I don't think that the speed of the HARD drive could have a bad influence on the compatibility of the HARD drive.

  You must only make sure that the size of the HARD drive and the interface are supported!

  Best regards

• Qosmio X 500 does support SATA III controller?

  Hello

  I think of one of my drives hard X500s replace with an SSD.
  So now I'm wondering whether to buy a SATA II (3 Gbps) or SATA III (6 Gbps).

  I understand that both standards will work on any SATA controller, but it the X 500 has a controller SATA III, so that I can take advantage of the extra speed of SSD? Because if not, I'd settle for the SATA II slower (and cheaper).
  Thanks in advance,
  Yanni

  Why you n t install a material such as Everest Home Edition or Sandra Software diagnostic tool.
  These tools are freeware and would provide details of s for laptop hardware.

  I also googled a bit for details, but I found just that mobile information supports the SATA interface. So it s mentioned not really what SATA controller is

• Presario C304TU does support SATA HD & Win7?

  Presario C300
  P / N:RE027PA #AB0
  Service C304TU

  This laptop has been owned by an old lady who used it rarely.
  I bought a second hand.

  It's like a new product.

  A few things I would change:
  1. its original HD is a 60 G IDE.  The Commission supports a 120G SATA HD?   "SATA Native Support" States in the BIOS.
  2. its origin OS is XP.   And it supports Vista, says in its specifications.   Support Win7?

  Thank you.
  Vickyal

  Windows 7 Starter is not recommended. Put in 32-bit Windows 7 with SP1 as suggested Serginho. Starter has no Aero desktop and is devoid of many features. Windows 7 will work actually quite well on the 2 GB of RAM. Better than Vista did.

• Satellite A200 - 1 GB does support SATA 300 HARD drive?

  I want to spend my Sat A200 - 1 GB hard disk with a 7200 RPM one... but they are all SATA300 models.
  Is this speed mode supported by the bios, motherboard and sata controller of this laptop?

  I just want to be sure that the hard drive works at its maximum speed capability and the sata and the mobo will not be a bottleneck...

  If Yes, the sata controller driver whichsis?... I want this wake in my own vista installation disc.

  Hello!

  Yes, you can use a disk with SATA300 mode but it only works in normal mode SATA no more at maximum speed. The Satellite A200 supports only SATA 1.0 mode (SATA150).

  You can use a HARD drive with 7200 RPM, this isn't a problem.

  What HARD drive capacities are supported, that you can see in the user manual. Look in Chapter 1.

  The SATA driver is in the Intel Storage Manager package.

  Good bye

• Y560P does support SATA 3?

  If I replace the hard drive with the sata ssd driver y560p 3, I work at full speed 6Gbs?

  Hi Hung,

  States of personal systems Lenovo IdeaPad Y560p model reference:

  SATA 3.0 GB/s, which is SATA 2.0.

  Please see PSREF page for more details...

  http://www.Lenovo.com/PSREF/

  Zehn

• Support SATA Acer Aspire Timeline 5810 t-8929

  Then this model does support SATA III? I am interested in the hard drive WD3200BEKX.

  Hello.

  You can use your laptop hard drive because it has a SATA interface and the HARD drive is 2.5 mm. Just keep in mind that the transfer speed will be limited by the bandwidth of SATA II, which is 3 Gb/s.

  I hope this helps.

  See you soon!

• Satellite R830 - support Sata III for SSD drives

  Hello

  Why Toshiba Satellite R830 does not support Sata III, although the plug to motherboard. indicate that it is possible?

  So you can not significantly increase the performance of your laptop by replacing the HARD drive with disk SSD Sata III. Is it possible to activate the Sata III (6 Mbps) on R830?

  All the system settings? It's also kind of bios update request necessary support SSD and SATA III...

  Any help is appreciated! :)

  > It shows that SATA III is supported, but when you install the SSD SATA III disc it does not work with higher speeds to ~ 250 MB/s (cases Crucial M4).

  From my own experience many SSD readers need a updated firmware that is provided by the manufacturers of SSD drives.

  But readers in the R830 SSD seems to support these specifications:
  Host interface: Max 300 MB/s
  Reading data supported: Max 250 MB/s
  Writing data supported: Max 160 MB/s

  By the way: the R830 supports a Mobile Intel HM65 Express Chipset and the chipset supports the storage interface high speed supports up to 6 Gb/s transfer rate for improved data access. Provides up to 6 SATA ports, 3 Gb/s with up to 2 ports support 6 Gb/s transfer rate.

• By Satellite L655-1KE supports SATA III?

  Hello world

  Sorry, but I write quickly because I repair this laptop from a friend (and need to do this before Christmas!).

  The problem is that the HARD disk is dead.
  So I need to buy a new one, but I have a question: does this computer motherboard support SATA III or only SATA II? The original HARD drive is SATA II.

  As the HARD drive is dead, I am not able to install a tool like Everest to get information.

  So, can anyone give me the answer help or is there a tool I can start and who could give me details on the SATA III supported?

  Another idea, is it a tool capable of giving that there are details from the start in mod console with a Windows CD?

  Thank you in advance!

  Gourbish.

  Yes, you might be right; SATA III isn't taken care of.
  I had installed a compatible drive SSD SATA III but I could get max / 3 Gb/s, which means SATA II

  However, the SATA is backward compatible, so you should be able to use a SATA III HARD disk but with limited performance.

• Apple does support HDMI 2.0 on any MacBook Pro?

  I would use my monitor Dell 4 k with my MacBook Pro retina end 2013.  This laptop does support HDMI 2.0?  I would like to use HDMI at 60 Hz.

  Thank you.

  In itself, it supports HDMI 2.0! But apparently some did work with a Thunderbolt/Mini DP adapter HDMI 2.0: CDM HDMI 2.0 cards

• Chrome still does support OSX 10.9.5

  Chrome still does support OSX 10.9.5?

  According to the page of the Google Chrome browser, this version of Chrome is said

  in support of Mac OS X to present 10.11.5 10.9.5. Chrome - the Google browser

  However, the questions and problems that Chrome continues to show Mac users,

  indicate that it is not a wise choice for Macs.  Users have found Chrome to be

  a resource eater, which affects the performance of OS X.

  We'll find a better browser to Mozilla Firefox; also Safari is always supported by

  Apple at the moment (my OS X 10.9.5 a recent version of Safari; I prefer Firefox.)

  • How to download and install Firefox on Mac - using Mozilla Firefox:

  https://support.Mozilla.org/en-us/KB/how-download-and-install-Firefox-Mac

  Browser like SeaMonkey (Mozilla) has also a customer of e-mail with browser for 10.9.5.

  http://www.SeaMonkey-project.org/

  A few others are probably OK, that won't cost you performance elsewhere.

  Good luck & happy computing!

• HP J6450 really does support WPA Wireless encryption?

  I just bought a new J6450 yesterday, and when I tried to install it as a wireless network my SSID does not appear (even if the PC just next to the printer is connected to my network).  Even when you enter the SSID manually the installation process does not recognize it. There are other SSID in the region that appear during the installation.  I confirmed that my router is broadcasting and the printer was 4 feet from the router, so I know that is not due to the intensity of the signal.

  Details of router - NetGear WPN824v3, configured for either 802. 11B or 802.11 g (auto mode), WPA encryption

  The only thing I noticed during my research it tonight is the SSID that was listed when installing 2 are encrypted and most of the HP support info and documentation related to the wireless configuration seems to refer essentially to WEP.  If the HP J6450 really does support the WPA encryption, and if so, does anyone have ideas for troubleshooting why it does not recognize my router?

  Thank you.

  Connection to the router under the admin user, then "Wireless settings" page is a Mode setting and the default value is "Auto 108 Mbps.  Using the arrow in the drop-down menu, change to "b and g" then set the channel to 'Auto' and save the configuration changes.