my toolbar has suddenly stopped from showing small screenshots and just boxes with writing in

Similar Questions

• For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  Hello. Try a few troubleshooting steps here: get help with Mail on iPhone, iPad and iPod touch - Apple Support

• iBooks has suddenly stopped sync between my iPhone and iPad

  iBooks has suddenly stopped syncing between my 6s iPhone and iPad Mini.  Both are running iOS 9.3, and the sync was working well for several days after I updated the two devices.  The two options of synchronization (bookmarks/notes and collections) are enabled for both devices.  And no matter on which device I add a bookmark or a note. It will not synchronize with the other device.

  I rebooted both devices and enabled the synchronization options, and then on again, but I was not able to run.

  Any ideas as to what is happening?

  Thank you.

  I'm having the same problem. I have iBooks on my iPhone, iPad and Mac and I cannot get any of them to Favorites sync. However, purchases are synchronized.

• My Windows Live Toolbar has suddenly stop working. When I click on anything, it is that the page cannot be displayed.

  No problems with this toolbar until yesterday. Now, I click on mail-page cannot be displayed. Click on profile-page can not be displayed. That's happened?

  Hi Ladybug!

  The question you have posted is related to Windows Live toolbar and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=23

• I was put on hold with customer service for half an hour only to be directed on the forums. Wow. My license key for Windows CS6 has suddenly stop working for no reason and now considers all my programs for free trials and refuses to recognize the key

  Suddenly, she considers the invalid key in spite of owning for almost 3 years. Anything I can do to make it work again?

  Hello

  My apologies for the inconvenience, please see the following links:

  Invalid serial number error

  Warning: "Adobe software real failure of Validation...". » | Windows

  Failure audit download or installation. CS6

  Let us know if that helps.

  Kind regards

  Bani

• My screensaver that shows pictures of "My pictures" has suddenly stopped working.

  My screensaver that shows pictures of "My pictures" has suddenly stopped working giving the error message "this application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem"I use Windows Vista Home Premium with a 32-bit operating system.

  Where I go/glance to re - install this file?

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  A screen saver that displays the images stops working in Windows:

  http://support.Microsoft.com/kb/2425702

  Method 2:

  Try to uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

  Step 1:

  To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2:

  Download and install the latest package for the version of Windows Vista, you use and see if it helps.

  My PC running the 32-bit version or 64-bit Windows?

  You can check the below links to download the same.
  Download details: Microsoft Visual C++ 2010 Redistributable Package (x 86)

  Download details: Microsoft Visual C++ 2010 Redistributable Package (x 64)

  Method 3:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  Hope the information is useful.

• my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba, to no avail.

  my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba. but after downloading the drivers, when I run the winrar files, he said inexecutionable. Please help.also when I run the compatibility of the test program, it says the webcam application or incompatible, even if it worked very well earlier.

  See the help/support site Tosh or their forums.

  Have you recently updated of your drivers from somwhere system other than Tosh site or installed any new programs or perform any maintenance operation.

  Program compatibility test cannot be invoked

• Tecra S4 - sound card has suddenly stopped working

  Hello

  I have a Tecra laptop S4 and the sound card has suddenly stopped working... It ceased to operate as last month and then started working again... but now it no longer works

  I am a computer tech for 14 years now...

  I downloaded the drivers from the toshiba web site and the sound card still does not work...

  I did a restore on the Toshiba as well and the sound card still does not work...

  Problems with Tecra S series with defective sound cards?

  I also have a Tecra S2 Portable and map its sudenly stopped working but after a few days after is started working again... weird huh?

  Hello!

  Can you please explain what you mean that it s not working do not?
  The sound card is listed in the Device Manager?
  You have activated the sound using FN + ESC?
  What operating system do you use?

  In your case, I will try to update the BIOS. You can find it on the Toshiba site.
  Check it!

  Good bye

• My hp psc 1350 all-in-one has suddenly stopped working.

  My hp psc 1350 all-in-one has suddenly stopped working. I can no longer open the software by clicking on the icon in the dock.

  Sorry, but I thought that I had reported my all-in-one had started working again. Unfortunately, I can't say what went around, because I don't know.  I had only a small part of the way towards what we'll fix me it when he started to work again. I remember that there was a step that I have been unable to finish, and when I asked how to overcome this problem, it started working again. I don't even have the chance to follow the final instructions. I would rather know what was wrong and what are the fixed elements, but I'll have to settle for a working machine.

• My DVD/CD drive has suddenly stopped working under Windows 7

  Ive been using Windows 7 for about 6 months now with on any trouble until recently my DVD drive has suddenly stopped working. Windows detects the drive but when I double click on it in my computer it says please insert disc. I find the drive in Device Manager and windows recognises that there is an error that says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I tried to uninstall the drivers in Manager device and rebooted the computer to let auto windows find the driver and reinstall it but to start, I get a message that says:

  Device not installed driver software

  I know that the drive is fine because it works fine in Ubuntu Linux system he worked great in windows 7, so stopped. any help would be greatly appreciated. Thank you.

  Go to the Web site of the factory, download the driver appropriate for your device. Uninstall the driver that is currently installed and uninstall the device in Device Manager. Reboot... After you restart, you have 1 of 2 options depending on how the software is packed from the manufacturing. (A) put an end to the automatic Windows installation feature and use the downloaded software to take care of it for you... If that's how it is set up to operate or (b) wait for windows to auto-trouvez and try to install the device, and when he asked the pilots to open and extract files downloaded to any location you choose and point the installer of windows in this direction.

  Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• Windows Media Center has suddenly stopped being able to see tuners. Error "could not find the tuner or all tuners are busy."

  Original title: Windows Media Center has suddenly stopped being able to see tuners.

  I am running Windows Media Center and have a 6 Ceton infinitv tuner connected to my network.  Since a few weeks things have worked very well.  Now suddenly after installing a faster wifi adapter, I get messages such as unable to find tuner or all tuners are busy... who don't feel like I can always go to the tuner by Explorer or chrome, by typing the address of it and it arises but also shows that it is set on the channels that I am no longer watching.  Any ideas on why WMC is suddenly acting when the only thing I did was install an a6200 netgear adapter, nothing has changed.

  Hi Eviln,

  Please contact Microsoft Community. I understand that you have a problem with the TV Tuner card, I will surely help you solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 driver corrupted or obsolete.
  3. wrong settings.

  Try the steps listed here:

  Method 1:
  I suggest you perform a clean boot and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to download and install the latest driver for TV Tuner card on the manufacturer's Web site and check if it helps.

  http://cetoncorp.com/product-support/

  Method 3:
  If the problem persists, you can see the steps in the following article and check if it helps.

  Watch TV in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions

  See the article for more information.

  Get help for your TV tuner
  http://Windows.Microsoft.com/en-in/Windows7/get-help-for-your-TV-tuner

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• device cd/DVD problem has suddenly stopped working?

  the dvd/cd device on my hp g62 has suddenly stopped working I tried to fix, but no swallows someone can help?

  Hello

  Check with HP Support, their online documentation and drivers, diagnostics,
  and ask questions in the forums about known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ----------------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I had CS4 running on my computer for about 4 years. Acrobat 9 Pro has suddenly stopped working.

  I had CS4 running on my computer for about 4 years. Acrobat 9 Pro has suddenly stopped working. Error message says. "licensing for this product no longer works."  Inside the box he is also says, "you can no longer use this program at this time.  You must fix to uninstall and reinstall the program or call technical support. However, whenever I install it I get a message that is INSTALLED successfully.  Can anyone help me, please.

  Thanks John.  I did all this and still nothing worked. I finally got help from a stranger (not in the USA) tech of cat. I guess she got hold of me and sent me a link to download this file. Eureka! It worked...  Posting it here in case anyone else has this problem. She told me that there is NO SUPPORT for Pro 9 except the forums. I'm happy you're here. Keep up the good work.  Here is the page to download the file.

  Download Adobe Acrobat products. 9, 8

  Here is the file that I used that worked for Pro 9 on Windows. Oops, it won't let me attach the file. If anyone knows how I can do make me know.

  Thanks again.

• Adobe Photoshop CS5 extended. The Liquify Filter has suddenly stopped working. Help!

  My Liquify Filter has suddenly stopped working. Any ideas?

  Check that you do not have the background show checked and the value of the opacity to 100%.

• Firefox suddenly stopped from asking me if I want my user name and saved passwords. Help, please!

  Firefox suddenly stopped from asking me if I want my user name and saved passwords. Help, please!

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.com/kb/private+browsing

  To view the history settings and cookies, choose:

  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "always use the navigation mode private.
  • https://support.Mozilla.com/kb/make-Firefox-remember-usernames-and-passwords
  • https://support.Mozilla.com/kb/username+and+password+not+remembered