my USB connect the sistem say it works well, but my USB key is not read anything like this isn't the power?

Similar Questions

• can't get photos to share facebok, email etc. Worked well but tried today and will not share ffrom photo app.

  Not able to share your photos of Photo on Facebook, email, etc. Was working fine until yesterday. Tried to share more older photos to Facebook and e-mail but I just an error message. All the photos are in the same format so ideas?

  I tried a few different things, but ended up talking to a Microsoft guy named Mathew. He was extremely helpful and patient, and after the download of many updates (67), the system seems to work very well. I don't know what the cause was but will present Bravo to Mathew to support tech Surface for its helpfulness and professionalism.

• USB keys do not work in my VISTA PC, but working in the XP computer.

  My PC is only a few months and underwarranty. VISTA is OEM original and authentic. All updates and installed SP2.

  But I have several problems with VISTA.

  One of them is the following:-

  USB keys do not work in this PC. Initially, they are recognized, but as soon as I start the data transfer it stops and does not recognize the keys more. Same USB keys work correctly on other XP computers.

  An external hard drive works perfectly on the same USB port. If the port is fine.

  Hello PG_eu,

  First of all if still under warranty, contact the manufacturer to execute tests for your USB slots. Have you tried to see if other devices work on the USB plug? The manufacturer of your may be able to replace your computer if needed.

  Then, I'd go for the Device Manager to see if you have errors. Go to Device Manager and see if you have a yellow fringe! showing that there are errors with your USB devices. Open the Device Manager in Windows Vista via the management utility of the computer, the Control Panel, or from the command prompt by typing in devmgmt.msc.

  You can go to the different tabs and see if the devices work properly, should be cancelled or update your drivers.
  You can also go into the event viewer and see if you have errors on your hardware devices.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• Dell: inspiron 1525 not boot from a USB stick, USB key are not not in the start option.

  Hi all

  I bought this dell laptop inspiron 1525 in the year 2008 with mentioned configuration:

  Core 2 duo processor

  1 GB OF RAM

  Due to some problems in my windows vista, I decided to install a new windows vista in my laptop. I run the dell support live cd at the start of my laptop and created the partitions on my system. But while the new installation OS on the cd i found that optical drive of my system does not work very well. so, I decided to install the new OS of USB. I went to the BIOS and selected the USB key in the boot sequence. but when I tried to install the new OS while pressing the F12 key, USB key is not listed in the start option.

  could someone help me to install the new OS in my machine? It is very urgent that my machine is down for 1 week.

  Please try attached BIOS changes screenshot than everything be useful to me.

  Thank you

  Gurpreet

  Hi Gurpreet,

  Thank you for your response.

  My apologies if I seem repetitive, but when you go to the Option of boot sequence in the system configuration screen, do you think that the USB storage device listed? And do you see a number in front of it?

  Go to the option for embedded devices and check if the USB ports are enabled or disabled. If disabled, change the option and enable the USB Ports.

  If this step does not help, go to the Maintenance option in the system configuration screen and press enter on 'Load Defaults'. On the side right, highlight 'Continue' in green, press Enter and then save & exit.

  Please keep us informed of the results.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

  Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

  Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

  Again, you can always buy the power supply cord and if it does not return.

  THX

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• HP Deskjet 1510 all in one - all I have to do before I connect the power?

  I just got the HP Deskjet 1510 all in one.  Is there something I need to do before you connect the power?  In the past with certain printers, which was a problem - some things you had to do before connecting the power supply or by using the installation CD. The instructions that came with it are not very clear or complete.

  Hello trainerjim22,

  Welcome to the Forums of HP Support!

  I understand that you are looking for the installation of the new 1510 Deksjet and wonder if the thing needs to be done before connecting the power supply. You do not want to remove any packaging, adhesive tape, etc.

  You would be able to consult this guide to support to ensure you are not missing anything: printer (Hardware) setting.

  I hope this has helped.

• I have the free cc that I would try to LR but it will download not advice? PS has worked well but no luck with LR.

  I have the free cc that I would try to LR but it will download not advice? PS has worked well but no luck with LR.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  This error message you see?

• I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I fixed the old-fashioned way. Uninstall - reinstall. Works fine now.

• My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  Hi Pedro,

  Make sure that when you design the phone and tablet version to keep in mind the limits of dimensions.

  Please share the url of your site for further analysis.

  Kind regards

  Akshay

• I'm in charge of a non-profit that uses Adobe Creative Suite 5. I have the software. but no product key. They want to have this facility on a new computer. I don't mean the software on the computer that works and not being able to get it insta on wreck

  I'm in charge of a non-profit that uses Adobe Creative Suite 5. I have the software. but no product key. They want to have this facility on a new computer. I wouldn't destroy the software on the computer that works and not being able to get installed it on the new computer. Help, please.

  Tony

  To reinstall the software, you will need the serial number. Please see this link:quickly find your serial number.

  Guinot

• USB key came into read-only mode

  Hello

  This morning my USB key came into read-only mode and I can't reverse this trend. I just assumed to come from the third party who helped me write on NTFS, but I have a drive HARD Toshiba (NTFS) that works and a USB key that is read-only. I changed the third party software and the same result. I tried the option 'get info' and I still do not see the permissions.

  I tried to format the drive - because it is read-only won't let me not - it. And so on.

  I tried disk utility - no result.

  I need an idea, suggestion, something for it to work.

  Thank you.

  When some Flash storage starts to falter, it locks in a read-only mode. So, it might be failing.

  When you try to format the drive, you must select the drive itself in disk utility, not partitions. If that's how you try to reformat, so I guess it's a failure.

• Tecra A4 - USB keys do not appear in 'my computer '.

  I recently had to restore my TECRA A4 system after a disaster, since then, usb keys do not appear in 'my computer' and aren't available to use? However, they are listed in the device under usb devices Manager and hard drives?

  I updated the Bios and looked for the updated USB drivers, but nothing found?

  Hello

  Maybe stupid thing, but try it please follow: disconnect your laptop computer, adapter sector and battery and leave about 60 minutes. After only 60 minutes connect AC adapter / CC, start your laptop and try to use the USB.

  Please let me know what happens after that.

  By the way: check this http://support.microsoft.com/default.aspx?scid=kb;en-us;817900 document