My video of CCP series will only create packages in English?

Similar Questions

• Brush/Pencil/Eraser tool will only create horizontal lines on Cintiq 12wx?

  I use Flash CS3 on a Macbook really over a year old and just move to a PC this last week. Because I can't crossgrade my license of CS3, I downloaded the trial version of CC Flash to use between now and when my school will give me the full license next month. Last night, things were working very well except for a problem with the audio, do not sync to the top when I tried to play my animated film. When I open Flash again this morning, I couldn't even shoot. Whenever I try to use the Eraser brush, or record the Pencil tools, all the Flash are horizontal lines, like this:

  After slightly more than looks, I discovered that this does not occur when I use my mouse, but only when I use the stylus on my Cintiq 12wx (my computer is a Lenovo from Y70 Touch Windows 8, if it's useful). I'm trying to figure out what I could do or what setting I could possibly changed between yesterday evening and this morning could have caused this, but I am at a loss. I have the latest version of Flash and the latest versions of Wacom Legacy drivers. Because I'm so new to this version and the windows as a whole, I am quite confused and frustrated by this whole situation. The solution is probably needed, but any advice would be wonderful. Thank you.

  Yep, reinstall the drivers Wacom worked. Thanks a ton.

• AUDIT only creates a record if the privilege is granted

  Hello world. I try to configure auditing for security requirements and did some tests on a test database. (10.2.0.5 on RHEL 6) with the statement of VERIFICATION BY CREATING the ACCESS USERS.

  Just did some quick tests, I found that VERIFICATION will only create a folder if I have the privilege to CREATE a USER. For example, here's my test case and the result:

  1. without privilege

  -CHECK CREATE USER BY ACCESS

  -Scott doesn't have the privilege to create users

  -Try to create the user, without success.

  -No record is generated in the audit log.

  2. with privilege

  -CHECK CREATE USER BY ACCESS

  -Scott got the privilege to create users

  -Try to create users, success

  -Record is generated in the audit log

  -Try to remove the user, without success

  -No record is generated in the audit log.

  I guess it comes to the design provided by Oracle, but this is not a little limited with respect to the audit of the attempts of creating a user? For example, if a user can access the database and kept the attempt to add users or perform other commands to test the limits of its privileges, which doesn't record? Just my 2 cents.

  CHECKING DBA;

  will begin recording failures.

  Before checking dba:

  Select username, extended_timestamp, action_name returncode from dba_audit_trail where username = 'AAA ';

  USERNAME

  EXTENDED_TIMESTAMP

  ACTION_NAME

  RETURNCODE

  ------------------------------ --------------------------------------------------------------------------- ---------------------------- ----------

  AAA	10.34.49.648357 25-SEP-14 H + 03:00	OPENING OF SESSION	0
  AAA	10.53.58.118870 25-SEP-14 H + 03:00	OPENING OF SESSION	0
  AAA	10.55.25.684156 25-SEP-14 H + 03:00	OPENING OF SESSION	0
  AAA	11.07.13.836793 25-SEP-14 H + 03:00	OPENING OF SESSION	0
  AAA	10.35.08.209502 25-SEP-14 H + 03:00	CLOSURE OF SESSION	0
  AAA	10.54.18.688233 25-SEP-14 H + 03:00	CLOSURE OF SESSION	0
  AAA	10.55.44.786759 25-SEP-14 H + 03:00	CLOSURE OF SESSION	0
  AAA	11.07.23.881964 25-SEP-14 H + 03:00	CLOSURE OF SESSION	0

  After checking dba:

  Select username, extended_timestamp, action_name returncode from dba_audit_trail where username = 'AAA ';

  USERNAME

  EXTENDED_TIMESTAMP

  ACTION_NAME

  RETURNCODE

  ------------------------------ --------------------------------------------------------------------------- ---------------------------- ----------

  AAA	11.07.18.790623 25-SEP-14 H + 03:00	CREATING USER	1031
  AAA	10.34.49.648357 25-SEP-14 H + 03:00	OPENING OF SESSION	0
  AAA	10.53.58.118870 25-SEP-14 H + 03:00	OPENING OF SESSION	0
  AAA	10.55.25.684156 25-SEP-14 H + 03:00	OPENING OF SESSION	0
  AAA	11.07.13.836793 25-SEP-14 H + 03:00	OPENING OF SESSION	0
  AAA	10.35.08.209502 25-SEP-14 H + 03:00	CLOSURE OF SESSION	0
  AAA	10.54.18.688233 25-SEP-14 H + 03:00	CLOSURE OF SESSION	0
  AAA	10.55.44.786759 25-SEP-14 H + 03:00	CLOSURE OF SESSION	0
  AAA	11.07.23.881964 25-SEP-14 H + 03:00	CLOSURE OF SESSION	0

• Windows Media Player will only play a sound with no video .avi and .mov

  I started having a problem where the Windows Media Player will only play the audio portion of my .avi and .mov video files.

  These files were created by my FlipCam or my Sony Handycam.

  I never had problems until recently and think that it is due to some kind of Windows Update.

  Both my computer and my wife's computer had the same problem and we are both using Windows XP Home Edition.

  I apologize if this topic already on this forum.

  Thanks for any help and advice.

  CoDec = compressor decompressor.
  A program is used to compress the file. You then need to unpack the file to play, you need the codec used to compress the file to decompress it on your pc.
  You need DVD playing software installed to power the mpeg codec, or you can buy a codec to just run in media player.
  AVI is a wrapper and may well contain more than 800 different file types, it has 800 different codecs!  Thus, to read an avi file, you should know what codec was used to do and have that installed on your pc to read.
  DV.avi is made with the dv codec, divx.avi is made with the divx codec.
  Of course, that manufacturers make their codecs, you must make sure you have the latest being, to be able to read files made with it, so everything just because you downloaded the codec divx 12 months ago does not mean it will play files created with codecs of today!

  I hope this explains it is ok for you.

  It surprises me that you say that you have downloaded all the updates of altest, but are still running wmp9, where we are now on WMP11 for XP and 12 for win7.

  I would update my WMP version first.

  Here is a page that will tell you that the codecs are on your pc and who has access to WMP 11.
  http://www.myvideoproblems.com/tutorials/HowToFindCodecs.html

  Here is a page that will tell you how to know what codec was used to create the file that you are trying to watch and also if you have the right codec for it
  http://www.myvideoproblems.com/tutorials/AVIcodec.html

  It is generally accepted that the codec packs adding is a bad idea, so if you need a codec to read a certain file, google it's manufacturer and just install the one you need.

  I would work just on the pc at the same time when you found what the problem is, you can fix on the other 2.

  Need more help with this, just ask.

• I am creating a total field contingent in a PDF form created by me which will only add cost in total ONLY if the box is checked.  Another disadvantage to this is one of the fields (number of monitors), I am eager to multiply by the field notes.

  I am creating a total field contingent in a PDF form created by me which will only add cost in total ONLY if the box is checked.  Another disadvantage to this is one of the fields (number of monitors), I am eager to multiply by the field notes, which is a field required number on there.

  All of them are select___

  Here are all the names of FQDN (towards the bottom):

  Check the boxes:

  • selectiPhone
  • selectSwipe
  • selectMonitor
  • selectDesktop
  • selectLaptop
  • selectiPadCell
  • selectiPad
  • selectPhone

  Fields of costs:

  • CostiPhone
  • CostSwipe
  • CostMonitor
  • CostDesktop
  • CostLaptop
  • CostiPadCell
  • CostiPad
  • CostPhone

  The notes field that will calculate this is "NotesComputer Monitor in notes". -It is a body of numbers forced the inability to put anything else in it.

  Then add them all in TOTAL COST

  Sorry for my ignorance: it's my first time doing a form like this.

  Please see below for the screenshot.

  

  Dropbox - conditionalSum.pdf has the answer

• Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

  have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

  have you tried the manager used tasks related to bugs

  Msconfig

  Explorer.exe

  and have had no joy... Please heeeeeeeeeeeelllpppppp

  Hello

  It is the fix in case there are any information it helps.

  A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
  screen early in the startup process
  http://support.Microsoft.com/kb/977675

  Microsoft - contact patch Support issues.
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  ======================

  Other troubleshooting methods that can help.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My photosmart 240 series is only an impression in red ink? CC = uk

  My Photosmart 240 series is only printing in red ink?

  The problem is your cartridge which is only printing yellow and magenta (red =).  Cyan is not printing.  You could check the cartrdige as an issue by gently dabbing it on a damp cloth.  This will cause a strong dark magenta and yellow blot, with maybe just a spot or not cyan at all.

• print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  I have a printer HP psc 2510 series deskjet.  Print many documents, it has notified me that I was low on ink which I was aware of.  I had a little more what to print, and chose the young project option for printing of no more than 1 to 3 pages.  I constantly tried to cancel the job that kept the origin of the printer show (not answer).  It aligned to the top other jobs, but after trying to delete all, printer then turn on again, it still shows the original print job, and I'm unable to find a way out of Quebec

  Verification of updates, there are only two listed as "optional" still thought by downloading them, it can solve the problem.  It does not; He gave the error message on the print job in that causing a feeling of power.

  I've never seen this before; I was always able to plug & play on my desktop printer and trying to use it on my Sony VAIO VGN-NW310F series.

  It is imperative to get this resolved.  School assignments are due and professorts not only does not want to hear the excuses of any kind, printing problems have always been easily resolved so far.

  Please - I need immediate assistance.  I already used the troubleshooter printer online which, as said earlier custody indicating the print job to Québec, is causing the printer to not answer.  I cancelled each time, but it will not go away.  I turned off the printer, reinstalled in the hope it would be empty, but it will not.

  I appreciate your atttention guest on this subject.  I work with Windows 7 Home Premium 64 bit operating system.

  Thank you for your help.

  Robyn Drake

  E-mail address is removed from the privacy *.

  Try in Services, locate the printer spooler, select it, and then stop the service.

  Then check if you can delete the print job, if so restart the service

• HPDeskJet - series j610 only prints in color

  HPDeskJet - series j610 only prints in color - NO, I'm not ink

  Hello

  1. How you want to print? You try to print by using Internet Explorer?
  2. What program you use to print?
  3. The problem occurs with all the files you are trying to print? (To both online and offline files)
  4. You have all your drivers and software up to date for your printer?
  Method 1:
  You can open the printer Troubleshooter and check if it solves the problem:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Method 2:
  You can consult the section "include common choices, you will find in this dialog box" in the following article and check whether . Color or black and white (in grayscale) prints are on in black and white.
  Choose printing options
  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options
  Note:
  You can also consult the manual of the printer.
   
   
  I suggest you to contact HP and check out what they have to say on the issue:
   
  http://h30434.www3.HP.com/
   
   
  I hope this helps!

• How can I get my Windows Home Edition Basic, backups of only changed files, it will only make full backups?

  Hello

  My Windows Home Basic Edition will only make full backups.

  I just want to make backups of my modified files and it doesn't let me do.

  I think I'm missing a few steps on the page where I can change the settings.

  I also had some problems with my Internet explore

  I have dial for my aol.

  Please help me.

  bjssnoopy

  Hello

  My Windows Home Basic Edition will only make full backups.

  I just want to make backups of my modified files and it doesn't let me do.

  I think I'm missing a few steps on the page where I can change the settings.

  I also had some problems with my Internet explore

  I have dial for my aol.

  Please help me.

  bjssnoopy

  Related to Internet explorer, you can download Firefox from http://www.mozilla.org or Chrome from http://www.google.com/chrome and use them as alternatives.

  Regarding backups, I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum meets for a windows problem reports. I know that I was very impressed when I tried it. Three I'm familiar with and like Norton Ghost (which I use for 8 years no 1 problem), Easeus Todo Backup free, you can download it on http://www.todo-backup.com/products/home/free-backup-software.htm and Memeo, which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com . You can get Ghost for almost nothing (like me), if you look at the sales.
  The March 2012 issue of PC World is very high on Easeus FREE program, and I was recently tested in a variety of configurations and must say that I am very impressed.  As Ghost will support up to a network drive and it will create a bootable CD for when your PC does not start.  See commentary to PC World to
  http://www.pcworld.com/downloads/file/fid, order 80031, 4/description.html .
  -
  CNET has a lot of reviews of backup program to
  http://download.cnet.com/windows/backup-software/?tag=contentBody;sideBar .

  Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).
  -
  External hard drives are the best for backup. You can get a 500 GB one for $70 and a 1.5 to one for about $90. You can also buy a flash drive 16 GB for as little as $10. It is the best insurance you can buy ever!

  -
  I hope this helps.  Good luck

• Oracle will always create a Data Guard certification?

  Oracle will always create a data protection Certification?

  If so it would be more than a "HA" - high availability.

  or would it only be on Active Data Guard.

  Thank you

  We have a Data Guard Admin certification soon. Unfortunately, I have not closer than that date.

  https://blogs.Oracle.com/certification/entry/0856_31

  Kind regards
  Brandye Barrington

  The Forum Moderator

• Hi, I would like to add an image in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  I would like to add a photo in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  Just add your photo on a higher video track, it will cover up to a below. You can use the effects of movement to move and scale the image.

  

• Use all displays full-screen will only clone, not extend

  I upgraded Tech Preview in July when asked last week.  Before the update, I had two working in two different Windows 7 computers virtual screens.  Since the update, view, use all displays full-screen will only clone, extend to the screen.

  It happened when I originally installed the Tech Preview as well.  In this case, I managed to toggle putting forwards and backwards and it started working.

  When I look to the customization of the display under windows it only shows a monitor and it does not find another when I click on "Detect".  I am able to use views independently under MacOSX.

  It is the Lion of mountain, MacPro, Late Model 2009 22 GB of memory.

  What should do?

  Thank you

  Dale

  Ah ok.  You use the value of the experience of the user as an indicator of video driver problems.  Also, when you suggested, update the video driver you just wanted to make sure that the latest VMware tools has been installed.  Ok.

  Had already checked those things and I had used the menu VMware to reinstall the tools.  Value of my user experience was 4.7.

  In any case, it seems to have been a problem with the tools VMware install because after I followed the instructions to manually install it here: VMware KB: installing the VMware tools on a Fusion VM running Windows, making a repair, everything's fine.  My video driver also shows a date of July 2013 now.

  Thanks for your reply.  He helped.

  Dale

  Post edited by: DaleHohm

• One of my Illustrator CS6 files will only zoom in increments of 100% - how to make it normal again?

  I have an Illustrator file that will only zoom in increments of 100%, regardless of whether I use the zoom tool to select the area or I get a specific zoom level.

  How can I tell Illustrator to return to its normal zoom behavior?

  niblettes,

  If it's a single file, you can try to rebuild as follows:

  (1) select all the layers in the layers palette Ctrl / Cmd + C to copy.

  (2) create a new document and select Paste remembers layers in the layers palette Ctrl / Cmd + F for all set up and order,.

  (3) Utick paste remembers layers in the layers palette.

• Will only open in read-only mode

  I created a PDF to a Word document in Adobe Acrobat Professional 10.1.1. When I opened the PDF it will only open in read-only mode.  I want to change the security settings to prevent editing before I send it but the file > properties > Security > > security method is gray and the value "no security".  I tried certifying and signing the document and even put in an envelope with no luck.

  Help.

  Thanks in advance.

  In Adobe Acrobat format, I found a solution.  Edit > Preferences > Documents/a view Mode I chose 'Never' to view documents in PDF/A mode.  It took care of my issue.

  Thank you.