HP ENVY 4500: Ink cartridges HP Instant

Similar Questions

• HP Envy 4500: Ink cartridge problem

  I replaced the black cartridge a few days ago and the printer worked very well. Today when I try to print, a get an error message ' Incompatible or cartridges cartridges listed are not intended to be used to this printer. I removed them and put them in again and again to get the message. I only use HP inks and the order's ink that says HP for my printer

  In the paper here troubleshooting steps can help solve the "incompatible cartridge" error on your new fancy 4500 cartridge.

• HP OfficeJet 4650: Ink cartridges HP Instant

  Hello

  I recently bought this printer to take with me to the University. I've set up ink cartridges HP instant around September 16, for a while, I was unable to connect my printer to the internet, so I brought a home router. My laptop, printer and telephone are all connected to the same wi - fi and they will print stop no problem but when I go my instantaneous count of ink HP he always tells me that the printer is offline and cannot update to tell me how many page I used. I don't understand why it won't refresh and says that it is offline when it allows to print from my laptop and wireless phone. I wonder if you can give me advice.

  Thanks Grace

  At least two times a month should work.  Please mark my post as solution accepted while others can find it.

• HP officejet 4500 ink cartridge 'rail' bump

  In collaboration with Window 7 on a gateway DX-4870.

  I have a HP 4500 just purchased in April and straight out of the box, he made a snap / the deaf sound of the ink cartridge area.  Stall hits ink cartridge slot against the wall on the right several times and everything that is behind all this keeps pushing him to also and then finally after a few minutes of all the this snap and the deaf it stops.  It looks good printing.

  Any ideas before you return it and get something else?

  Thank you

  The band of coding (transparent plastic that runs along the printer above the transport bar) could be dirty causing the cart to not read the appropriate end point and collide with the printer.

  This can be cleaned up but is usually not the case on such a new printer unless there has been a lot of printing.

  One small thing to check is to make sure that the printer is connected to a wall outlet and not a stip to eliminate a power problem that can cause weird problems.

  What this a copy printer and print from the computer?  The noise corresponds to each?

• HP Envy 5530: Ink cartridges does not...

  I have a US HP Envy 5530 who should use the ink cartridge 61.   I am now back in the United Kingdom and the replacement cartridge says use 301.

  When I do that, I get an error on the printer saying that the cartridge is not compatible.

  Suggestions (other than track down 61 ink cartrdiges) greatly received.

  See you soon.

  Hi lloydsal!

  You can call the HP support at 1800-474-6836 hotline so the tech supervisor can make the process of 'Régionalisation' (on the location that you set on the printer and the cartridge is riding) so you can still use it in the United Kingdom.

  I hope this might help.

  Nice day!

• HP Envy 4500: HP Envy 4500 Ink Jet works with both cartridges are black?

  Then I load two black cartridges in this ink jet printer and do it print? (after that I tell it to do black and white only).

  Hello

  Unfortunately no, printer will check the cartridge slot to ink three colors and it stops if it does not find (even physically there is something).

  Kind regards.

• HP Envy 4501: Ink cartridge does not

  My HP envy 4501 claim that the new real black HP61xl ink for older generations. Its identical to the empty cartridge, I deleted. But I can't get the printer to accept

  HP has changed the design of cartridges HP 61xl some time ago.  The new version works in older printers but new printers (for example, envy 4501) will no longer accept new versions of the cartridge. Here it describes this change.  If contacting HP does not solve the problem to your satisfaction please post here.

• HP envy 5530: ink cartridge problem

  Unfortunately I know that we are no longer covered by the warranty but I'm out of options as to what to do
  father rather than use its own printer to print something used our (mine and my mother) and on the last page, we got an error message on the printer screen that says "PROBLEM of CARTRIDGE of INK" with the note to replace the cartridge, now our cartridges arrived by post on Friday and I just went to install a new one now (for when my mother comes back from the cottage) and I still get the same problem.

  Well, I think that Youtube is your last hope.

  https://www.YouTube.com/results?search_query=envy+5530+cartridge+problem

  Find out more if necessary.  Otherwise I think that your printer can be roasted.

• Re: 5740 ink cartridge problem

  Same problem with HP Officejet 5742 using ink instant. Error for the last 5 days. No new HP cartridges and yet if I bought a new one and installed. This works. Pretty upset that the ink cartridges HP Instant service seems don't have not one) detect a problem b) to correct it. What's the point?

  Hi Spuggie,

  I'm sorry you have been having problems with your HP Officejet 5742 and instant ink cartridges.

  I don't know why your new HP cartridges are not arrive when you need them.

  For your questions, I recommend communicate you directly with ink HP now and see what they can do for you.

  https://instantink.hpconnected.com/us/en?jumpID=in_r11549_hpsupport_ii2_consumerinstantink_071014

  At the top of the page, you will find a number to call instant contact with ink.

  Explain your situation and see what they can do to help fix the problem!
  Jean

• HP Envy 4500: Instant ink cartridge problem

  I just registered to instant ink HP.

  All new Instant cartridges have been installed on January 28, 2015, I printed just 2 pages.

  I turned on at the time of the printer and the message on the screen says:

  

  I followed by using the line, contacted HP cat, cannot get assistance UK on phone, cleaned the contacts of the printhead as suggested on the help section of the software, removed and re inserted the cartridge approximately half a dozen times but still no joy.

  Instant ink cartridges are installed:

   

  After sending an e-mail to HP ink I asked a new cartridge.

  What is likely to happen or is there anything else I can do?

  Any help would be appreciated.

  Hi @scifijunky73

  Welcome to the Forums of HP's Support. I understand that you are having problems with one of the instant ink cartridges you have.

  My recommendation is to contact HP customer care on 0207 660 0596 (indicating your call is on the program of instant ink) Monday - Friday 08:30-18:00 (except holidays). It is best that you contact team of instant ink for your cartridge problem.

  Please let me know if you are unable to contact the team of instant ink.

• HP Envy 4500: Says new ink cartridge is not compatible, it is the right type of printer

  I bought a new black ink cartridge and it was appropriate for the printer and worked for the first time. Now, whenever I need to print something the printer says "cartridge is not compatible.

  Need answers step by step to solve the problem. Thank you.

  Hey @angelee,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your desire 4500 e - all - in - one printer which rejects a cartridge. I can help you with that.

  To start, make sure that the printer is connected directly to a wall outlet, not a surge protector. When done, make sure you use real not reloaded cartridges. If the cartridges are genuine and not filled, this document explains How to fix the errors of rejection cartridge with your printer.

  Please let me know the results after following the above. If you are able to clear the error, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP ENVY 5646: Replacement of the ink cartridges

  Hi - I have the all-in-one printer from HP ENVY 5646 and endorsed the Plan of instant ink Hp.

  I just run out of the "no Flash" color ink cartridge (ink cartridge black 'no snapshot' is about half full)-both "no snapshots" cartridges supplied with the printer.

  So - I replaced the color ink cartridge is 'no snapshot' with the color cartridge instant I received a few weeks ago, when I signed up for the instant the ink plan, my question is: should I also replace the ink cartridge 'snapshot not' black now with the black cartridge of instant or wait until it is empty?  Is it true that I should replace the black cartridge and color at the same time whenever one runs out of ink?

  Thank you very much for your reply - much appreciated.

• HP ENVY 4500: Windows "without toner /ink' 10 issues

  Hello

  Used to use my desire with my old PC to Windows Vista 4500. No problem at all. Did you buy a new laptop this Saturday and my desire with the same ink cartridge does not print at all (unless I mail to my printer or use Web services set up the tool and test a testpage using this thing).

  But when I want to print... starting from the webbrowser, from word, the message comes the printer runs out of ink or toner and it refuses to print. I use this printer only modus black. So no color cartridge is present.

  Tried to solve this problem but everything I try, what no toner or ink message guard showing no gains 10 for this printer. Someone knows a solution? THX!

  Hi @LenK8940,

  Thank you for joining the HP Forums!

  I noticed that you can not print with your HP Envy 4500 on Windows 10. And I'm happy to help you!

  There could be a conflict of driver on the computer. This printer with a single-cartridge mode that allows you to print black without color cartridge. I recommend you try our printing HP and Scan Doctor, let me know the results!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that solves your problem!

• HP Envy 4502: hp 4500 series cartridge not printing yellow

  Hi, I changed the cartridge color tr twice, but all characters diagnostic outs show that the color of the yellow ink is missing, but black, blue and Red are perfect. I tried the head cleaning etc. nothing works. Someone at - it give suggestions on possible fault. I wonder if it is the failure of the print head. Thank you.

  Hey @telboy1949,

  Welcome to the HP forums!

  I see that you have some problems with a 4500 want cartridge that is not printing yellow. I can help with that.

  First of all, the envy of 4500 doesn't have a printhead integrated, which is part of four cartridge systems. This document will help you with Troubleshooting cartridge. If you arrive at any directive talks about changing the cartridge can instead contact HP technical support by clicking hereand filling out the form below.

  I hope this helps you with your impression and I hope you have a great week!

  If this solves your problem then please let other users know by clicking on accept as Solution on my post.

  If you appreciate my help so please let other users know by clicking on the icon below my post thumbs up.

• 4500 envy: Envy 4500 will not work after ink change

  I changed the ink cartridge in my HP Envy 4500.  It prints the alignment fine page.  I put on the screen to scan and it repeat me that it is «forever» scanning until I have Cancel.  Then, it is stuck on cancel until I have force a stop down.    I'm ready to take a hammer to this printer.

  Hi @Paulaayn,

  Please go on the HP Forums! I'd be happy to let you save your craving for 4500 sledge-hammering.

  I understand your printer is stuck in a mode of scanning and based on your description, it seems that it is the alignment page that didn't scan. You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  I ask because I wonder if the printer does not have enough power to run the task. If you do not have the printer connected directly to a wall jack already, we will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  Please let me know the results of your efforts, and I'll get back to you. Thank you.