My Vista computer will not be stopped, randomly freezes and gives error Logon process has failed to create the security options dialog

Similar Questions

• Vista in conflict with security programs? Mega-slow start, ctrl-alt-delete = ' login process failed create the security options dialog»

  Hi all

  Have a laptop HP here with heavy problems! After the connection, it slows right down until it takes at least 5 minutes just to open the start - menu it hangs just with the whirly-circle thing. If I do ctrl-alt-del, the screen goes black and after a few minutes, I get the message "Login failed create the security options dialog» The Task Manager does not open. I managed to slightly improve things by disabling the user account control (miserable thing anyway) - it's just too slow, but now the Task Manager opens about 50% of the time and the other 50%, I get the message a little more lively 'failure - security options '. If I leave the phone that it will sort itself out after about 45 minutes, after which it ends to load every startup process and behaves normally. If I boot in Safe Mode, all right. I also ran virus checks - no nasties - and there is nothing surprising in the event logs.

  After an extensive search on Google, I have established that many people - all users of Vista, surprise, surprise - had the same problem, dating back years, pretty much when Vista is released. (This laptop is perhaps a year old). Some corrections were proposed, but the majority concluded that the deactivation of their safety programs, regardless of what they were, did the job. This laptop is running Windows Defender and TalkTalk Internet Security, provided by F-secure. Disable Windows Defender made a slight improvement in speed. Deactivation of TalkTalk Internet Security returned the laptop to normal operation. I strongly suspect a fundamental conflict between Vista programs and safety - that we must all know that Vista is rather prone to bugs - but why Microsoft hasn't issued a fix for this? I don't want to go around without security. Nor do I want to download a new program of security and have the same thing happen againn weeks down the line. Someone had the same problem or found a permanent solution for it? I am barking the wrong tree here? I'll try uninstalling a few recent Windows updates to see if any of those who triggered the hissing fit.

  Okay, I think that I fixed it. I will post the solution for you all poor users of Vista with the same problem. Corrections of spare is located in the following Vista forum thread:

  Error-message-login-process-has-failed-Create-Security-Options-Dialog

  So after that I've identified the cause was the Internet of TalkTalk security program, I did some messing around in msconfig and reduced to the function FSGKHS, alias F - Secure Gatekeeper Handler Starter. If I disabled this service, everything has worked, and if I booted up with no other process or running services to all others as the stuff of F-Secure (with the exception of group policies which I think is an essential service?), I had the same problem. Certainly FSGKHS. However, I did not know why. Everything I had was a vague notion that maybe it was a key to registry corrupt or something. I don't know why I even thought to this. And if I hate the registry cleaners, I couldn't think of any other way to identify registry problems. So I created a restore point and ran CCleaner. It came with a bunch of registry errors, but none of them were related to a F-Secure or files of TalkTalk. I told CCleaner to remove it anyway and booted up with FSGKHS running, just on the offchance. Whaddya know? He is cured. Don't know why, but it works perfectly normally from start to stop (fingers crossed). I know a lot of people have solved this problem by disabling their safety programs - maybe they had a corruption of the registry too? A kind of strange thing to register/security/Vista. Anyway, go try CCleaner before you reformat your drive hard peeps and let me know if this worked for you.

• Error: "connection process failed create the security options dialog" during the backup of the computer

  After the full backup PC has been running and has reached about 40% computer gradually crashes with programs "not responding". CTRL-Alt-Del does not produce error described. This option is a hard stop. Powered PC brings back to life and working in all other respects. 'Normal' backup works ok. Suggestions? Thank you very much.

  Hello andyv12,

  Look at the solution of another post with the same number and the error message.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/719b3123-DE05-4535-9f9a-9dee121a0adb

  If please reply back and let us know if the solution helped to solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  Hi Harry,.

  · What happens when you try to stop?

  · You receive an error message or error code?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  You can check the link below: Windows XP Shut Down and auto-restart issues: http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

  Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  Hello

  Secure area login feature will not work unless you host your website with BusinessCatalyst.

  Please take a look at this as an alternative

  Password protect Pages Widget for Adobe Muse

  Also, check this thread,

  Re: Can I create a login/password in the Muse for a HTML5 page or two?

• Vista - computer will not start without the disc

  loaded vista on my computer - now computer will not start without the disc

  Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system.  Hope this helps someone else with the same prob.

• WiFi problems; laptop computer will not hook up to interenet wifi enabled ping any other past failed test

  laptop will not hook up to wifi interenet is active ping test has not everything past idk what to do please help!

  If this problem started since the recent Win7 updates then: -.

  The KB2705219 update could be the cause and uninstall that solved the problem for some users.

  But...

  In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.

  I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Computer will not accept my product key and is reported as invalid.

  COMPUTER DOES NOT NOT MY AMENDMENTS AFTER THE RESTART PRODUCT KEYS

  Had to reboot my computer using my recovery CD.  All good until I had to insert my key product and then amendments notice told me that they were not valid. What can I do

  Hello dolly Ribbon,.

  ·         What version of the operating system is installed on the computer?

  ·         You type the product key correctly?

  ·         Where did you get the product key from?

  ·         Are you trying to install the operating system or restore to factory settings?

  ·         The error occurs when you enter the product key during installation?

  ·         What is the brand and model of the computer?

  If you perform a restore factory all programs and data will be lost. If you are faced with question entering the product key to restore factory contact the manufacturer for more help and information.

  Make sure that the caps lock is turned off.

  Get validated product key by contacting Microsoft technical support.

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

  For reference:

  How to identify, locate, and replace a product key

  http://support.Microsoft.com/kb/811224

  Windows 7 activation error: invalid product key

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-invalid-product-key

• Win 7 will not update with 9 59 and 643 error Codes

  Were you able to copy and paste all command at the command prompt? It is normal that FORFILES to have a/c more than once as long as the other/c is contained in the order framed by double quotes.

  If in case you weren't able to copy the entire command, there is a possibility that he will not run.

  See screenshot below for the examples provided by the Forfiles command:

  

  

  Please repeat the steps listed above and an update on how it goes.

  Any new ideas?

  Please consider running Disk Cleanup, "Cleaning Windows Update" option. This operation requires a reboot that you won't be prompted to enter.

  Best regards, VZ

• my windows vista computer will not be validated

  I recently installed several security updates, and later my windows vista is not recognized as authentic. I bought it 2 years almost with installed before buying it, so I did not any area recovery CD or windows vista. the sticker on the bottom of my laptop is completely worn out. I downloaded an application key finder and have what seems to be a product key valid, but when I try to run the slui.exe it never ends. I get error 0xC004E003. I also never get an option to activate by phone, I suppose that that option no longer exists. How can I fix? It is the kind of a disadvantage and makes me nervous about using my computer on an unsecured network.

  Your error message indicates a "stuck key".

  This particular message occur to try to activate a key OEM_SLP - which can be activated by internet or phone-activated, it is based on the BIOS to activate.

  Your only real option, as you say that the sticker is now unreadable, is to reinstall Vista using the manufacturer's recovery disks or partition - note that this will erase all your data and programs, so be installed first of all external media!

• Computer will not be stopped because explorer.exe is always play its closing session.

  When I try to stop a message says that 1 program is still ongoing and that explorer.exe is always play his logoff. The only way I can stop is to choose the force shutdown. How can I solve this problem? Thank you.

  Do yourself a favor go to control panel sounds and "select speaker" icon look select Exit Windows no sound be sure to save and apply. I don't think unfortunaately you can not turn the start windows sound more been trying for some time now. Why the hell they would trigger a sound when you stop 3 concerts of the bones down I'll never know. If this is not your decision should be normal

• My Windows Vista computer will not install SP1.

  He is in the final stage and then returned. I even uninstalled my antivirus to try it.

  Hello

  "How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues"

  Try Resolutiom 2 here:

  http://support.Microsoft.com/kb/947366#resolution2

  See you soon.

• My Windows Vista computer will not install the kb2393802 update.

  I have tried manually and through the auto update facility. It gives an unknown error code. Help!

  Have you checked other related threads?

  X 64 Vista update problems... KB2479628 & KB2393802
  Security Update for Windows 7 KB977165 and KB2393802
  Failed to update KB2393802

• Windows will not be stopped; also get a RunDLL error every time I start up

  Computer doesn't stop, I pressed the power button.
  RunDLL error which comes up every time I start, it's 'there was a problem starting C:\Users\Gregg\AppData/Roaming\cdeteg.dll.
  The specified module could not be found.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system