My vista does not have aero

Similar Questions

• I wana make my window see - across borders, but my version of vista does not have this setting. where can I get this setting?

  is there anything I can download to install the transparency setting?

  Very likely not.  If you have an old graphics (video card) card that does not support Aero, who's who.  In addition, if you have Vista Basic you are more able to get the Express upgrade to add this feature as Vista is currently in the extended Microsoft support.  You can check for updated display card drivers that could help, but maybe not.

• Satellite P200: Vista does not have a bakup

  Hello

  From time to time my Satellite P200 will not make a backup. It gives an error message after almoust 10 seconds.
  But when I'm not really using my laptop, it seems that it takes an automatic backup.

  To be sure, I'd like to reuse Thrue image with a Sata HD

  Anyone with experience with this?

  Thank you

  Luke

  Hello

  I don t use the True image software and so I can't provide any solution 100% for you problem
  But I ve goggled a bit and it looks like a new patch and update is available for Vista support eventually it s a software bug and so the image creation doesn't always work.

  PS; I use the ghost and this software is really a good solution if you want to create clean images.

• Win2k8 R2 and Vista does not have KB2559049.

  Try to test KB2559049 on Vista and Win2K8 R2, but the patch is not get offered on the two operating systems. Instead, his old patch KB2530548 offer. I sent this patch of older but still KB2559049 not get offered.  Please notify.

  The vista system belongs to my company...

  It is a specific consumer support forum. Please contact your COMPUTER or SysAdmin for additional advice.

  Or you could ask for help in a forum appropriate partner or a Vista IT Pro forum.

• Vista does not have the necessary or required updates.

  1 office 2003 Service Pack 3 (SP3)
  2. update to filter junk e-mail in Outlook 2003 (KB974771)
  3. update to filter junk e-mail in Outlook 2003 (KB976882)
  4. Update for Office 2003 (KB907417)

  I tried to install these normally as well as individually, and be denied every time. All other updates install perfectly except for these. I don't know why these updates in particular keep fails; any help or ideas would be greatly appreciated.

  Error code: 80070643

  I followed the instructions for troubleshooting this code and error and I still have the same end result.

  Hello Jason Gagnon
  Welcome to the Microsoft answers site

  The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• This computer does not have an enough space to the temperory files: error Code 0 x 80004005: upgrade of Vista

  Hello

  I am trying to upgrade to Vista home premium, Vista ultimate, but get the error continues on the execution of the installation program. Here is the error msg:

  This computer does not have a sufficient space for temporary files. Windows installation needs at least 445 MB of space on any partition for temporary files

  Error code: 0 x 800004005

  I want to just point out that I have 4 partition and each partition have at least 5 GB of free space on the disk with one of them having 35 GB of free space.

  Would be grateful if someone can help me solve this problem

  Concerning

  Vik

  Hello Vik.in,

  If you upgrade your Windows Vista,

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click on system and security.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click on disk management under storage.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action

     Note At this point, the existing Windows installation will not be able to start until the remaining steps are complete.

  9. Close computer management.
  10. Insert the Windows Vista DVD.
  11. Restart the computer.
  12. Use the Windows Vista DVD to start the computer.
  13. Choose the desired language and keyboard settings and then click Next.
  14. Click repair your computer at the bottom left of the screen.
  15. When you are prompted to repar startup data, click repair and restart.
  16. After the computer restarts, repeat steps 12 through 14.
  17. If your computer has only one installation of Windows, click Next. Otherwise, choose the correct installation of WIndows, and then click Next.
  18. Click on the link of the Startup Repair tool .
  19. Click Finish once the repair is complete. The computer should reboot to Windows Vista.
  20. Start the upgrade using the Windows Vista DVD

  Here is a link to the article that talks about it:

  http://support.Microsoft.com/kb/928232

  Hope it would work, answer back if it does not work.

  See you soon
  Syed Irfan

• My screensaver on Vista does not work and I have a wireless mouse.

  Original title: HID Non-User Input data filter (KB 911895)

  My screensaver on Vista does not work and I have a wireless mouse.

  I can't find the update Microsoft - other hardware - lay HID Input Data Filter (KB 911895) I checked update history and he's not here.  How can I download it?

  Hello

  · What is the number and the model of the wireless mouse, you work?

  See the link below and try the following steps: the screen saver does not start after the installation of a wireless pointing device: http://support.microsoft.com/kb/913405

• I 86.5 free concerts and Vista does not level. He tells me I need 7538 MB to upgrade and I have a lot more free?

  I 86.5 free concerts and Vista does not level. He tells me I need 7538 MB to upgrade and I have a lot more free?

  Hi smkymountains,

  What is you receive the exact error message?

  Step 1: You can follow the steps mentioned in the article below

  Error message when you try to upgrade a computer to Windows Vista: "this computer does not have a sufficient space for temporary files.» Error code 0 x 80070103.

  http://support.Microsoft.com/kb/928232

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista does not accept my password I don't have a password reset disk. How can I get Vista?

  I restarted my computer and now it will not accept my password to connect.

  Hello

  If you know your password but vista does not read the information below

  http://support.Microsoft.com/kb/940765

  If the front is not the case read this:

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up ever since I downlo

  I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.

  This has happened

  Each time Firefox opened

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• my vista does not start! Help!

  Vista does not start on my computer compaq laptop. After a vista update automatic :(

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• My update of Windows media player in windows vista does not play a mkv file.

  * Original title: about file mkv

  My update of Windows media player in windows vista does not play a mkv file, what do I do

  There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)

  http://www.AddictiveTips.com/Windows-Tips/how-to-play-MKV-files-in-Windows-Media-Player-in-Windows-8/

• Windows Mail: this file does not have a program associated with it

  I can receive and open the email, but when I click on anything in the email a box comes up which says "this file does not have a program associated with it for performing this action. Create an association in the set associations Control Panel. Don't know what to do. Any help would be great.

  Sorry, there just no option in this forum for the widows of mail... windows vista Home premium.

  [Original title: windows mail problem]

  ... when I click on anything in the email is a box that says "this file has no program associated with it for performing this action...".

  Everything is a bit wide.

  • If what you click is a hyperlink to a Web page or a URL of type http://answers.microsoft.com/en-us/windows/forum/windows_vista-ecoms/windows-mail-this-file-does-not-have-a-program/62ac226a-cca4-4ae9-9678-98e0a015fc2a, then the file associations that are broken are those who launch a browser to view the web page. This would include the HTTP and HTTPS protocols.
  • If you click is an email address, it is the file association for the mailto: protocol that broke.
  • If it you click on a file as an attachment to the e-mail message, then this is the file association for the type of file (for example, .docx, .pdf, .jpg) concerned who broke.

  Assuming that you are talking about the first, (re-) represent Internet Explorer as default browser by clicking on the Start button then clicking default programs. Select set your default programs, and then Internet Explorer in the left page and click the Green Summit.

  To ensure that all users of the computer doesn't have the same problem, login Windows with an administrator account and return to the default programs page. This time, select set access and the computer program defaults.

  1. Select custom , and then click the chevrons pointing to extend the selection.
  2. Under choose a default browser, select Internet Explorer.
  3. For other browsers you use, select enable access to this program .
  4. Click OK, and then restart the computer.

  Now try to click a link in an e-mail. If it still does not work, please describe in detail what is happening, including the full text of the error message.