My Vista won't stop finish the session.

Similar Questions

• Order of port re-auth authentication and switch / stop of the session

  Hi all

  We are implementing an ISE (1,4) and met regarded questions on the agenda of the authentication and a stop of the session after posture in line. We got mab, dot1x as authentication order (priority of authentication is set to dot1x, mab). We have configured a reauthentication in the ports of the switch. Windows uses begging all-connect NAM (see 4.2) to dot1x and posture. During the re-authentication, either all-connecting NAM or switch does not start an eapol start and switch allows the session to the MAB, where - as when seen dot1x and mab authentication switch order generates eapol start. The switches are 3750 (15.0 (2) SE8).

  Any possibility we could force the switch/NAM agent sent an eapol start during re-auth?

  Regarding the posture, posture once conform for an endpoint (after dot1x authentication passes) following a judgment of the ISE manual session for an endpoint, switch creates a new session in ISE changes and switch the State of the unknown port to posture. Posture ise AC client still shows status of complaint of posture in the endpoint. It seems do not know about the stop of the session. During NAM endpoint agent session performs a re-auth component however posture remains unchanged "in line".

  Does anyone have experience this problem?.

  Thanks in advance.

  Concerning

  GA

  Hi Gaj-

  I had the similar problem in the past and for setting the following attribute:

  Termination-action-AVPair attribute modifier = 1

  Give that a go and let us know if you still have any questions.

  Thank you for evaluating useful messages!

• Vista won't start after the last update of Silverlight - restarts constantly

  I installed the latest version of Silverlight from Microsoft Update, July 21.  There are 2 updates, but the other would not move.  My computer worked nomally and later when I stopped it, I got the "Configuring updates... do not turn off your computer" message.  It seemed to take a while, so I went to bed and the next morning, I saw that the computer had finally stopped.  I started it and I got the message "configuration updates stage 3 of 3." 0% complete.  Do not turn off your computer. "After anywhere from 10 seconds to a few minutes, it restarts.  She's constantly - he keeps just reboot and it displays the updates configuration message.  In the System Recovery Options, Startup Repair indicates that everything is OK.  "System Restore" to go to the restore point previous does not work.  What can I do?  The only other option and restore utility is all erase and install the drive from the factory.

  I have Windows Vista, the latest service pack and updates.  I have F-Secure anti virus/firewall.

  He has also failed to the previous Microsoft Update a week or 2 but it gave an error code of that time.  I looked at the error to Microsoft code and it says that the update log was full and there was a command to enter to remedy.  I did that and installed the update and everything was fine.  Unfortuately I have more error code or order more.

  Perhaps related to this problem?  My computer is pretty much dead now after Silverlight updated because it constantly restarts.

  Don't boot from the XP CD.

  Do an ERD of VistaBootable of the info below:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Vista won't start and the startup repair can't find any problems

  Have a Dell Inspiron under Vista 64 bit, which does not start. I have inserted the re installation DVD and ran the Startup Repair which could not detect a problem.

  Diagnosis and repair are the following

  ----------------------

  Managed last start: 2010-10-23 21:12:44 (GMT)

  Number of repair attempts: 1

  Details of the session

  -------------------------------

  System disk = \Device\Harddisk0

  Windows directory = C:\Windows

  AutoChk run = 0

  Number of root causes = 1

  Test performed

  ------------------------------

  Name: Search for updates

  Result: Completed successfully. Error code = 0 x 0

  Take time = 0ms

  The test is performed:

  ------------------------------------

  Test the disc name: System

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Name: Troubleshooting disk

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 218ms

  The test is performed:

  ------------------------------------

  Name: Metadata for the drive Test

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 62ms

  The test is performed:

  ------------------------------------

  Names OS test target

  Result:

  Completed successfully. Error code = 0 x 0

  Taking time = 188ms

  The test is performed:

  ------------------------------------

  Name: Checking content Volume

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 140ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic Boot manager

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 78ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic log for the system startup

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 16ms

  The test is performed:

  ------------------------------------

  Name: event log diagnosis

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 530ms

  The test is performed:

  ------------------------------------

  Rated: Internal audit of State

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  The test is performed:

  ------------------------------------

  Name: Start-up condition Test

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Root cause found:

  -----------------------------

  State of the start indicates that the OS booted successfully

  But the laptop still wont start I tried to run chkdsk/r from the command line and was unable to do as he says Windows cannot run disk checking on this volume, because it is write protected. I don't know what to do now anyone no matter what ideas thanks in advance.

  Seems odd. Startup Repair should have solved the problem.

  Have you tried new reboot running?

  Give it a shot...

  Any chance that you have a "backup computer?

  Try to do a full restore of the PC.

  See how it goes...

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• Epson 880 printer won't STOP PRINTING THE SAME DOCUMENT.

  How can I get my printer to stop printing the same document over and over again?

  Moved from feedback

  Original title: printer IS NOT STOP PRINTING THE SAME DOCUMENT.  I HAVE a COMPUTER WINDOWS 7 AND ONE PRINTER EPSON 880 and need to know how to stop it. print

  Hello Irene,.

  When the printer prints, you will see a small printer icon to the taskbar (lower-right). Click it and you'll see the files that are printing. If you view the document, please remove it from the print queue.

  If this is not enough, then proceed as follows.

  1. type Services.msc in the box Start of search and press on enter.

  2. Locate the print spooler and right click on the service and then click stop.

  3. when the Print Spooler service is stopped, go to C:\WINDOWS\System32\spool\PRINTERS and delete all the files mentioned in the record. This will clear the current print jobs.

  4. once the files are deleted, return to the Services window and start the service print spooler.

  Hope this information helps. If you have any questions, please let us know.

• Synchronization finished the session and stop

  Hi all.

  Since I've updated my VMware Fusion version 2.0.1 (128865) and disabled the sharing feature, my Windows XP Pro displays a synchronization status bar and wonder my credentials. (see attachment)

  Any suggestions?

  Thank you!

  WHELP wrote:

  > Since I updated my VMware Fusion version 2.0.1 (128865) and disabled the sharing feature, my Windows XP Pro displays a synchronization status bar and wonder my credentials.

  This isn't a question of Fusion and you turn on a feature of the Windows operating system that has nothing to Fusion self even if he tries to synchronize with the shared folder of VMware, associated bone user initiated the function of the operating system.

  1. open my computer.

  2. in the Tools menu, click Folder Options.

  3. on the offline files tab, make sure that the checkbox enable offline files is not checked.

• When Vista SP2 will stop receiving the normal Windows updates.

  It was mentioned in another thread that Vista (I guess that SP2) reaches the end of mainstream support in April.

  I have seen this document,

  http://Windows.Microsoft.com/en-us/Windows/products/lifecycle#section_2

  which suggests to me normal stop support (Windows updates) in April.

  Could you clarify it please exactly what it means for a 'regular' customer with a preinstalled copy of Vista or someone who installed it themselves via a disc OEM etc.

  This means that Windows Update will cease to provide patches, etc from April this year for Vista SP2?

  Thank you...

  Hi Mooly,

  Updates will still be available after April, there will be always some support for updates of security which are sent to the bottom of the Windows Update. According to article http://support.microsoft.com/gp/lifepolicy

• Since the last update with el capitan, imac won't stop with the stop button in the Apple menu

  Since the last update in el capitan my imac and my macbookair will not stop or recover on the regular basis. I have to press the power button to stop the hard wayanybody a response?

  If your Mac is not turned off, press and hold the power button for 5 seconds to force a shutdown. Read more in this article OS X El Capitan: disconnect you, sleep, restart, and stop down

• My Mac won't stop spamming the SPACEBAR.

  I am trying to use my Mac, but unfortunately, it seems to be spamming the SPACEBAR. I tried to see if it was stuck and even restarted it but nothings works building.

  That means "spamming the SPACEBAR?

• Failure — CPU fan comes on full blast when the computer is running. Will not stop unless the computer is off

  Fan comes on full blast when the computer is running. Won't stop unless the computer is turned off, or in low power state. Tech has replaced the fans, problem resurfaced after computer tech left. Everything else seems to work very well. Dell XPS One (all-in-One), Intel Core 2 Quad CPU, Q8200 @ 2.33 GHz, 4 GB RAM, OS, Vista 32-bit

  I suggest you get back the Tech to fix it properly this time, because they have replaced the fan.

  Or try Dell Support/Forums:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Black screen and OS stops since the upgrade to VISTA SP2

  • I'm having a problem with my Vista operating system since I've upgraded to SP2
  • The problem is that the operating system stops often enough
  • I 'from the end-user point of view"tried to test," under what conditions it stop? And after trying different scenarios, I realized that it stops when it goes into sleep mode. And that's why I got black screen mainly. However if I change my screensaver, then he won't show me the black screen but still it stops.
  • Can you guys suggest me a solution?

  The problem persists if uninstall you SP2?

  How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  You did it that everything has been updated (drivers, etc) before installing SP2?
  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx TaurArian [MVP] 2005-2010 - Update Services

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• STOP: c000021a {fatal system error} the Session management cannot create protected prefixes

  My Dell Inspiron 1545 gives me this message and not going anywhere

  «STOP: c000021a {fatal system error} The Session handle cannot create protected prefixes system process finished in unexpected ways with the status of 0xc000003a (0x00000000 0x00000000).» The system has been shur downwards. »

  Any suggestion on how to solve this problem? Thank you

  If all those who are unable to work, (they have not for me)...    I have a Win7 pro running Toshiba Satalite, and after a few weeks to get slowly mad and furious... I did...

  Went to the toshiba Web site updated BIOS drivers.

  installed (all automatically)

  Restarted

  Fixed
  ------------------------------------------------------
  all together took about 3 minutes. man, I was happy...

  Here is the link to your BIOS updated

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&OS=WW1&OSL=en&SystemID=INSPIRON1545&CATID=-1&impid=-1

  I hope this works...

• Lenovo SL500 Windows Vista crashed with STOP: 0x0000007B (0x80599BB0, 0xC0000034, 0x00000000, 0x00000000) error and won't start.

  Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start

  Hello peoples,
  I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
  Help, please! I'm really desperate right now, and any help would be appreciated!
  Thanks in advance!

  PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)

  PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!

  EDIT: The error message went like this:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

  Thanks for the billionth time!

  have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works

• I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  Hello nancy milano,.

  Thanks for this info and choosing the communities Support from Apple. I know how important is able to complete your update to El Capitan at a later date! The good news is that you can simply delete the "install Mac OS X" install app in the Applications folder on your Mac. Then you can open the Mac App Store when you're ready to update and restart the download from the tab updates or searching through the Mac App Store for El Capitan. This is a resource that explains the process of update more:

  Update of OS X El Capitan

  See you soon!