My wife bought an officejet 6600 for me to upgrade my photosmart all-in-one B209a,

Similar Questions

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• Photosmart all-in - One 7520: new driver for Mac El Capitan in a 7520

  I installed my OS from Mac to El Capitan (10,11) 2 days.

  Have the camera HP Photosmart all-in-One 7520.  The printer driver will only up to Mountain Lion (10.6).  The printer works, but the scanner does not work.

  I had Geek Squad go through everything on computer, looking for latest info on your site, etc.  Conclusion: Need new driver for the scanner compatible with El Capitan.

  Is a new driver in preparation?  I would like to know as soon as it is available, because I scan a lot of information every week.

  Thank you.

  Hi @DStrick,

  Glad to see that you are using the HP forums, this is a great question other customers might wonder about too! I can help you get the required software for your 7520 for use with El Capitan! Once solve us the problem, please state the position which I accept as a Solution to help others find the answer to your question!

  This download package contains the complete software solution for Mac OS X El Capitan including all drivers and software needed: file name: HP-inkjet ink-SW-OSX - Mavericks_v12.34.44.dmg

  This software has been updated 1 October 2015 and can be found here: software and driver downloads for the Photosmart 7520

  Please let me know if this actually solves the problem, or if you need assistance. Thank you.

• I need an installation CD replacement for Photosmart all-in-one C4580

  I lost the CD for my HP Photosmart all in one single C4580 and need to reinstall the printer to an old high-end desktop pc (2006)

  Any advice?

  Thank you...

  You are the very welcome.

  Why not download the software on another PC and burn it to a CD and then use the CD you burned to install the software?

  Or you can copy the file to a USB flash drive and install it on the PC using the USB key if the PC has a USB port.

• need drivers for epson stylus cx 8400 printer all-in-one

  well, I need someone to give me the correct site for the drivers and software for my printer epson stylus cx8400 all-in-one and please, if you do not know the correct site, don't bother answer to had a wrong answer, that I don't like looking for what is a simple driver

  Hello

  This forum is for HP products, but the following link shows what you need (you must choose the right operating system for your computer):

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=90342&infoType=downloads

  Kind regards.

• I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.

  Hello

  I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?

  Thank you

  Tim

  Hi Tim,.

  The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.

  You can download the latest version of the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107189-2&cc=us&DLC=en&LC=en&OS=219&product=5068754&sw_lang=

  After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.

  Shlomi

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• How to upgrade my HP Photosmart all-in-One for Windows 7 on my new computer?

  My HP Photosmart C5380 all-in-One bought in 2008, and it was connected to Windows Vista my laptop LG. However, this month my laptop LG broke down and I bought a new Sony VAIO laptop.

  However, I can't seem to connect my printer to my laptop because the printer says that it does not accept Windows 7. I brought the computer to a repair shop, and the seller told me that there is a program that can be downloaded from the HP site which would allow the printer HP be able to connect to my new computer. But I can't seem to find it.

  Could someone help me please?

  There are two flavors and versions of Windows 7. The question fundamental whather it is 32 or 64 bit. This is where the software for Windows 7 . There is a drop-down list on the web document that allows you to choose the appropriate operating system software you want to download.

  Best regards
  ERICO

• Upgrade memory for HP Pavilion 23 - g040xt CTO all-in-One desktop

  When I ordered my

  HP Pavilion 23-g040xt CTO of all-in-One desktop PC I could only afford the version of 4 GB of Ram. Now, I want to upgrade the memory up to 16 GB. I have a few questions

  1. I noticed all this in a use SODIMM and I was wondering if I could buy any DDR3 SODIMM for this or if I have to buy a specific manufacturer?

  2. now, I have only 4 GB using 1 of the 2 memory slots. I'll be able to buy 2X8GB and use this location empty on my motherboard and run dual channel?

  3. How do the memory locations? Just pop the back of all in one PC?

  Thank you

  According to the specification, this model supports up to 16 GB (2 x 8 GB), as follows:

  Dual channel memory architecture
  Two DDR3 SODIMM Sockets (204 PIN)
  Supports the PC3-12800 (DDR3-1600)
  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SODIMM

  Any brand or model of RAM memory that meets the following specifications should work on your computer. If you have 4 GB in a housing, you will need to remove it to install both 8 GB DIMMs. Yes, you just need to pop on the back.

  There should be two or more screws on the back that need to be turned counterclockwise until you hear each "click" of 5-6 times. Then, take a lower corner and lift the corner. Repeat with the other bottom corner. Now, lift the... starting back down. You may also need to remove a cap on the memory locations to access.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Photosmart all-in-one software for windows 7

  Hello everyone,

  I just upgraded my PC HP Pavilion Media Center of Windows XP Media Center for Windows 7 Home Premium 64-bit.

  Update went well, but now I can not install the specific software for my printer HP C7280 all in one.

  Printer is on my home network, printer and PC are on the cable network and the PC sees the printer and can print to the printer.

  However I can't get the software to install on the PC from HP!

  Have tried in many ways, direct downloaded software, used HPPIW, also HP print and Scan doctor.

  Whenever I never go beyond the first part of the installation sequence.

  CAN ANYONE HELP?

  No need for that now, the problem is solved!

  I turned off the antivirus and firewall, then ran the uninstall04.bat file

  Then edited msconfig so I could start with a clean boot. Do you have a reboot

  So I ran the installer as admin and everything went through, with a few minor hicups, but he set himself in the end.

  This problem would not have occurred if I had installed the printer directly after the installation and update of Windows 7.

  I installed Mcaffee directly after Windows 7, but must have installed the HP software before McAffee.

  Thanks for your help, that it is appreciated, you are the only person who has responded to my post!

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• HP Officejet Pro 8600: what is error 351 for HP Office Jet pro 8600 all-in-one

  I can't send or receive faxes on my HP Officejet Pro 8600.  I get a 351 error when I try to fax.  Can you help me?

  Here is the solution for error 351 and causes:
  Cause 1: the remote computer did not a command to fax on the local computer as the connection has been lost. These errors can occur if the phone lines in the region to be faxed are old or there is noise (static on the telephone line). Other reasons can include power outages and other problems related to food.
  Solution: New attempt to receive faxes when telephone line conditions improved. Call phone provider if the driving conditions fail to improve.

  Cause 2: The call waiting service can cause this error. The "click", heard a call incoming, is actually a momentary break from the line.
  Solution: Disable the ECM. Errors might still occur and could lead to a degraded on the received page image quality. However, the ability to send the entire document will be improved.

  Cause 3: The remote user pressed the Stop key while the reception was underway. In rare conditions, incompatibility between the two machines could cause the remote machine to abandon the call.
  Solution: Try to send to a lower bit rate.

• I just bought the Officejet Pro 8600 more. The sprint is all set up. But it takes long time

  between the sending to print and actually printing the file. Is there a way to speed it up?

  The printer is now connected to the computer via a wireless connection. The scanner works fine and report may be the printer from the printer LCD display. After completing all of the proposed tests now the printer reacts much more quickly. Maybe it's because I turned off the printer and turn it back on and the printer has been reset correctly print wireless. Thanks for the help.

• HP Officejet 6500 e709a: Error Message When you install all in one product

  I'll have to re - install my HP Officejet 6500 e709a software.  I get the following error message when I try to install it.  Someone at - it suggestions on how I can fix this?

  Thank you

  JN

  

  Hi @MattNC79,

  Welcome to the Forums of HP Support! I understand you are trying to reinstall the software and drivers for your HP Officejet 6500 to the computer running Windows 8.1 operating system. When you try to install, you get an error message with an error code. I would like you to click on the link below to begin:

  HP printers - fatal error ' error 1603. A fatal error occurred during installation "(MSI error 1603) displays in HP Software Installation in Windows

  Please let me know the results, I'll watch for your reply.

  Thank you

• B110a Photosmart All in One printer loading software for Windows 7

  Have a new unit but software will open in Vista, but not for Windows 7, try CD, download and also such HP Officejet Pro 8500 A909A recommended by HP centre. Still get fatal error code 08573521 also mentions the MSI file. SCAN. Any body recommend a solution to loading the software for Windows 7-bit

  Thank you

  Bob

  HI - go ahead and try following the steps described in this document.  I'm not sure that identifies the specific error, you see, but take a look through the document and it should offer a few suggestions that might solve the problem.

  Hope that helps.