my windows sign comes often less than 5 minutes if I don't actually have a certain activity.

Similar Questions

• window will stop in less than a minute, stops and restarts everytime I use the computer

  message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer

  Hello

  ·        This happens randomly, or when you open any application on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  I suggest you do a clean boot and see if the problem still occurs.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 2:

  It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.

  Automate tasks with Task Scheduler

  http://Windows.Microsoft.com/en-us/Windows-Vista/automate-tasks-with-Task-Scheduler-from-Windows-Vista-inside-out

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Why my computer lock me out when I leave for subject of less than five minutes?

  Why my computer lock me out when I leave for subject of less than five minutes?  I don't have a password to unlock it, then if not how can I removed the lock feature?

  Hello
  I suggest you to see these steps:

  • Press right on your mouse button when your desktop is visible. A menu will appear.
  • Move your mouse to the bottom of the menu and click on the word "Properties".
  • Look at the tabs under the marked blue title bar "display properties". You should be able to see one marked "screen saver". Click the screen saver tab once. You should now see a small monitor.
  • Look for the dropdown next to the marked buttons 'Settings' and 'Preview '. Click on the arrow down on the right side of the menu drop down.
  • Look at the list of available screensavers. The first menu is marked '(none) '. Click on this title. Once you have clicked on the title, the "Apply" button will become operational.
  • Click on the button apply. Close the display properties window and the Control Panel window. You have now properly disabled your screen saver.
   

• try to install the trial version free Acrobat pro download XI stalled less than a minute to go... erro

  try to install the free trial version of Acrobat download of XI pro stalled less than a minute to go... error 110

  Hi annette10s,

  Please see the solution to troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html

  If you continue to experience difficulties, you can try to start a direct download by following the steps listed in http://forums.adobe.com/thread/981369

• Windows 7 adjustable threshold less than 100% of the battery charge?

  Hello.

  I have a Clevo P170HMx which is a cell phone game impressive.

  Probably the only thing I don't like is that my battery is always 100%.  I used my laptop plugged into an electrical outlet.

  and knowing that to have my battery to 100% and always load will destroy the battery life.

  My previous laptop was an IBM Thinkpad, and it had a maximize battery gauge allows you to define the allowed charge batery

  threshold.  I got this game to start the load to 15% and stop loading at 20%.  I had this same battery from the time of purchase

  until 4 years later, I got my new laptop, the battery remained in excellent condition with load capacity full not escape

  as do other batteries when they stay at 100% and reload constantly.

  Is it possible on Windows 7 pro to change the threshold of battery charge to stop less than 100% load to save battery life

  life?  Or is it Windows software available for download that will make this recommended?

  If Windows 7 is not able to do this, I would say something in an update service pack or the next version of Windows.

  Thanks a lot for your help.

  See you soon...

  Hello

  In normal circumstances as soon as the lithium-ion battery is full, a properly functioning charger will stop the charge and will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe.

  The latest Lithium-ion batterires have a limited number of Discharg/charge cycles.

  You can create a detailed report on the State of the battery to double check the battery status.

  1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.

  2 in the command prompt window, copy / paste the following command.

  powercfg-energy-output %userprofile%\desktop\energy-report.html

  Press ENTER.

  Wait for the command to complete (usually about 2 minutes).

  This create a file named energy - report.html and place it on your desktop.

  3 go to your desktop and double-click the file to open.

  Scroll to the bottom for the battery: battery information section.

  You will see:

  Rated xxxxx

  Xxxxx full last Charge

  (Where xxxxx is a number)

  4 to calculate the amount of full Charge capacity left in the battery split the value of the last Charge full rated capacity and multiply by 100.

  For this example , use the following numbers.

  Nominal capacity 4400

  Last full 2937

  Calculator enter 2937 and divide by 4400.

  Multiply the multipliez le resultat result by 100 , then press =.

  The result will be 66,75

  This means you have 66,75% of the nominal capacity of the battery.

  Tell us what you find.

  Concerning

• On a new laptop battery life is less than 5 minutes; says it's fully charged

  I bought a Clevo M72S/M721S Mini laptop, a year ago. When I bought it, it had about 10 minutes of battery life. Now, it lasts 5 minutes without the AC is plugged in. When it is plugged in, however, it is said that the battery is charging and is 100%. I don't know if it's a dead battery, a battery life vulnerability in XP, a bad connection or something else. I've never used this thing only on batteries, with the exception of battery life tests. Help, please!

  'Prodo123' wrote in the new message: * e-mail address is removed from the privacy... *

  I bought a Clevo M72S/M721S Mini laptop, a year ago. When I bought it, it had about 10 minutes of battery life. Now, it lasts 5 minutes without the AC is plugged in. When it is plugged in, however, it is said that the battery is charging and is 100%. I don't know if it's a dead battery, a battery life vulnerability in XP, a bad connection or something else. I've never used this thing only on batteries, with the exception of battery life tests. Help, please!

  Critics of this mini are not too abundant, but I found a couple for the re-brand model, and the life of the battery when new, was, on average, about 75 to 90 minutes. Since you never more than 10 minutes BL, and it seems to work fine on AC, my guess would be a bad battery from the beginning. Too bad it's probably out of warranty, but you can try to contact them in any case to see if there is perhaps a battery recall.

  You could try to calibrate the battery. Read this article and see whether or not you want to try it:

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC49012

  And here is a procedure of HP, although it should work for any laptop:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00035862

  SC Tom

• I reinstalled my window 7 before I disabled Adobe CS3, now I anm says that I have too many activations, please help

  I had to do a full format of my hard drive and start with a clean installation of Windows 7, I got CS3 Adobe active and do not turn off prior to formatting, now I have re - install Adobe CS3 and it tells me I have too many activation

  What can I do?

  Klyken please contact our support team directly contact customer service to increase your number of activations.  You can find more details by using the Activation & deactivation - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

• Since the download of Windows 7, word 2002 and Word open but pad off less than a minute. Any suggestions?

  First message
  Microsoft Word has stopped working
  Windows is checking for a solution

  Second message
  A problem caused the blocking of the program works correctly.
  Windows will close the program and notify you if a solution is available

  Microsoft Word 2002 has not been certified for Windows 7, so there is a possibility of compatibility issues. Make sure that you install the latest Service Pack and patches. Also try to do a repair install and upgrade to a compatible version 2003 or 2007.

  In regards to WordPad, give a try:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Windows 7 Enterprise taking more than 12 minutes to start

  I just upgraded from XP to Windows 7 Enterprise.  It takes my laptop 12 15 minutes to boot to the Ctrl/Alt/Del screen.  Then it is up to our field and I need to change my name to computer and password user domain\username to finally get to a desktop computer. It always comes with a "network connection was not found. Type NET HELPMSG 2250 ".  Extremely frustrating.

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/threads

  I hope that helps!

• Wireless disconnects in less than 5 minutes - Photosmart Plus e

  After the free phone disconnects, I have to disable and enable the wireless to the printer in order to reactivate the connection. If the connection comes on a different IP address than before I mess around with the Macs in order to communicate with the new IP address. It was not the behavior of the printer from the box (he worked for a month or two). It started as the printer started bugging me to activate ePrint, who wasn't on the behavior of the box. Then I also installed a firmware update, requested to the printer. The printer connects to a router from Verizon and are both of my computers Mac OS x 10.6.8 with all available updates. Also, I turned on the ePrint to see that if held connection awake... it doesn't. Help.

  I think it was just a matter of restarting the router. I had rebooted the computer and the printer several times. When I saw that the lane change 11 worked after leaving the facility for 30 minutes, it would have been absurd to me that it would be interference with the router sitting next to the printer. So I reset the router from Verizon to the recommended automatic channel selection, channel 1 is selected automatically, I left things defined in this way during the night, and everything seems to work properly this morning.

• Whenever I leave Bitlocker services, less than two minutes the service state will be to stop early.

  Hello

  Are facing a problem with Bit locker whenever I'm bit locker services.msc.

  within two minutes the service status gets changed to prevent to boot.

  could not even start the drive encryption. Please help

  Concerning

  Hi Manas,

  Thanks for posting your question in the community of Microsoft Windows. I understand that you cannot start the Bit Locker service.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. do you have problems using bit locker?

  Please follow the methods and mark the question below:

  Method 1:

   

   

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

   

  Scan your computer by using the Microsoft Security Scanner by clicking Download now to check if there is the infected virus or malware:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• WMP automatically dividing burn 2 discs even if less than 80 minutes

  I use WMP (regardless of the version provided with Windows 8) to burn a playlist for a total of 78 minutes. When I pull the playlist in the burn list, it creates automatically 2 discs, one of which is only about 70 minutes and the second disc, with the other 2 songs, only about 8 minutes. I have the setting of combustion WITHOUT gaps. I know that CD can contain 80 minutes of music, so why this phenomenon happens? More importantly, how can I get WMP to stop sharing my CD? Is there an option that turns off? Thanks for your replies in advance.

  WMP should really manage a burn of 80 minutes (or almost) on a W8 pc without problem. Were you able to complete a full disc on this topic before? If this is not the case, there may be a driver issue because any discs seem to be OK - unless the cd/dvd drive itself is defective. If it is a laptop, it is perhaps useful to check that the lens can travel right to the outside edge of the tray, and that there is no dust/debris that prevent its movement. I don't think that's very likely, but it's worth the trip! (just a Visual inspection of the course and a clean soft around the track-line if necessary, as in the image below (red guides are my addition) - Cheers, Ric.)

  

• Control/sleep of PL/SQL loop works only for expected less than 90 minutes

  Hi all

  I was wondering could someone help me. I've written a procedure that checks to see if a condition is true, and if it ends successfully. If the condition is not true he sleeps for a minute and then try again. If a time-out value is filled the procedure raises an error. This timeout is passed into the procedure in a few minutes.

  My problem is that the procedure only works if the smaller numbers are passed. I tested with success in 1,2,5,10,20 and 30 minutes, but if I spend 90 minutes it is regularly indefinitely (I let it run for more than 2 hours before killing him).

  CREATE OR REPLACE PROCEDURE proc_wait_test (p_minutes_wait, INTEGER)

  IS

  var_start_date DATE: = SYSDATE;

  var_check_result NUMBER: = 0;

  BEGIN

  WHILE TRUE

  LOOP

  -fake check which returns always false just to test the concept

  SELECT count (*) INTO var_check_result FROM DUAL

  WHERE 1 = 0;

  IF (var_check_result > 0)

  THEN

  EXIT;

  ON THE OTHER

  IF (SYSDATE > = (var_start_date + (p_minutes_wait/1440))) THEN

  RAISE_APPLICATION_ERROR (-20000,' procedure has expired, waiting specified limit of ' | p_minutes_wait |) "minutes exceeded.");

  END IF;

  END IF;

  DBMS_LOCK. SLEEP (60);

  END LOOP;

  EXCEPTION

  WHILE OTHERS THEN

  lift;

  END;

  The procedure is designed to integrate into an existing solution, so I can't change the basic features. Database version 10.2.0.2

  Thank you very much in advance for any help.

  Steve.

  Hello Steve,.

  We have this kind of question here: Firewall silently kills idle connections more N minutes (and when there is a high load on the firewall, the "N" decreases aggressivly).

  In the "Workaround", we used "DCD" (dead connection detection) as clients of the server pings on the side of all the N minutes (we use 10), the original purpose of the CR is to interrupt the session side server if the client is gone. but we are interested in a "side effect": This causes a part of the network traffic it is enough to "cheat" the watchdog of firewall.

  Very easy to implement: the server side, in sqlnet.ora:

  SQLNET. EXPIRE_TIME = 10

  (active next time the other is started)

  Best regards

  Bruno.

• How to make the collection interval less than 1 minute?

  Hello
  
  I have a metric that I wish I had a report on trends in second instead of / minute. Here's my metric definition.
  
  < name metric = 'number of messages sent.
  alias = "SentMessageNum."
  category = "FLOW".
  collectionType = "trendsup."
  indicator = "true" / >
  
  I read of http://support.Hyperic.com/display/doc/measurement+plugin#MeasurementPlugin-MeasurementPluginmetrictag . There is a "gap" and a field "rate". Then I updated my metric definition to be
  
  < name metric = 'number of messages sent.
  alias = "SentMessageNum."
  category = "FLOW".
  collectionType = "trendsup."
  interval = "1000".
  rate = 1 "s".
  indicator = "true" / >
  
  After you restart the agent, I found Hyperic stop collecting data for this measure. All data in the tab 'Metric data' remains to the number before I made the change.
  
  So, how have Hyperic save data per second? Thank you very much.

  Hello

  Hyperic HQ does not support a collection within a 1 minute interval.

  See you soon,.
  Mirko

• Mail session expired message appears after less than five minutes

  I recently installed u-verse internet high speed. Now when I work on my page of e-mail yahoo within five minutes, he told me that the session has expired and I need to log in again. I spent several hours with the support of you verse, uninstalled and reinstalled my Firefox, deleted the cache/cookies several times. Update my preferences on yahoo to stay connected, disabled my Add - ons, made sure settings does not automatically erase cookies, etc, etc. Does anyone have the same problem and a fix?

  There is a very long thread here in the forum about this problem.

  One possible cause is your proxy settings. If you check this deeply buried dialog box, you can correct:

  Orange Firefox button or classic menu Tools > Options > advanced > network

  Click on the 'Settings' button and choose the option "No Proxy" or "Use system settings" change OK. See if that helps.

  More suggestions here: https://support.mozilla.org/en-US/questions/928922#answer-339570