my Windows Vista Home Basic is not getting activated via online and telephone automated system.

Similar Questions

• Windows Vista Home Premium does not start after mother, CPU and RAM upgrade card

  I recently updated my PC Windows Vista Home Premium. I changed the motherboard, CPU, RAM and video card. When I booted the machine, it has not started Windows. Windows tried to recover, but could not. Is it possible to get this machine to start without doing a new install? The new facility will lose important files.

  Hello

  It's a normal reaction after replacing the hardware that you have replaced.

  The hard drive with the installed operating system contains the old motherboard drivers, etc..

  They must be replaced with the new motherboard, drivers etc.

  You will need to reinstall the operating system and then install the new drivers of motherboard (you should have a diskette of drivers for it), if the new installation does not probably them, that it will not...

  To backup your data > buy a hard drive USB enclosure > put your hard drive in it > plug it into another computer > read and copy your data from it in this way.

  See you soon.

• Windows Vista Home Basic Edition, Acer laptop wireless, Linksys router and connect Lexmark X 9350 wireless network.

  I'm tired... I tried everything I can think of, as well as everything I can find online in order to connect my printer Lexmark X 9350 WiFi for my Acer laptop which is connected to my home network wireless via my linksys router. At the same time, the printer has been set up through my existing wireless network and was working properly. (FOR A SINGLE DAY!) Then I got the bright idea to installNorton Anti Virus Security. Since then, my printer stopped working through the wireless network. It works as a stand-alone Copier and fax machine, but nothing of the printer.  I contacted Lexmark via online support, but their suggestions did not work or were so confusing that it would take a computer technology to interpret the instructions to correct the problem. I learned more about the Wi - Fi networks and computer by trial and error, I should be able to re - connect my printer the eyes bandaged.  Help, please... This problem is ongoing for weeks. Thank you so much in advance.

  Just a thought, as you say it started with Norton check his firewall exceptions:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista Home Basic will not update, System 5 error, access is denied.

  My windows will not update. Microsoft fixit tool will not install on my machine. When I try to reset the updates manually I get the error System 5, access is denied.

  Hello!

  This link may be useful
  http://support.Microsoft.com/kb/555644
  Thank you
  Makoi

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

  Where can I obtain service pack 1 for windows Vista Home Basic

  Where can I obtain service pack 1 for windows Vista Home Basic

  Hey electric7422

  Click Start then right click on computer

  then left click on properties

  It will tell you if you have a 32-bit version or 64-bit vista

  links below have downloads the standalone vista service Pack 1 for each bit version

  the 32-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  the 64-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Walter, the time zone traveller

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  I reinstalled my windows vista.made a clean install removed windows xp sp3 when I try to activate my windows vista Home Basic sp1 it say not validates the code supplied with the disc, the code is below my laptop and the cd is in the package with my laptop, I used the key once when I re-installed my operating system once and it worked perfectly

  If you get this message before you try to turn it on, it means generally that you must not read or wrong entered the key.

  Use a magnifying glass and a bright light to read the key (or ask someone else to read it for you)

  In particular check the characters B/8 and G/C/Q.

• Windows media player Vista Home Basic will not play Internet radio?

  I recently downloaded REALPLAYER and accidental set as my default player. When I went to use WMP to listen to the radio on the internet I discovered this. I have reset WMP as my default player, but now it will not play internet radio. I click on a radio station and I am asked to download a shortcut file to listen to the station.

  Any idea?

  I have windows Vista Home Basic 32-bit

  Thanks for your help.

  Hello

  You can view these methods:
  Method 1:
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/
  Method 2:
  You can try to re - register wmp.dll file.
  Type the following command in the command prompt administrator mode and press ENTER.
  
  regsvr32 wmp.dll
  Press ENTER after typing the command. If you get a message like wmp.dll registered correctly, and then click OK in this message box. Close the command prompt and re - open Windows Media Player and check.

• I have windows Vista Home Basic, but my system was infected by viruses as recyclebin, System Volume Information. Wat to do how to get rid of this...

  Dear friends,

  (1) I have the windows Vista Home Basic, but my system was infected by viruses as recyclebin, System Volume Information. Wat to do how to get rid of it.

  (2) I want to format my laptop, but the problem is that I'm not having Windows Vista Home Basic Formate how about this disk, please help me in this respect... How can I procedures...

  (3) if I install the new Vista there will be no problem for my laptop... it

  $Recycle.bin and System Volume Information are important Windows that are normally hidden system files. Why do you think they are viruses?

• When I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic) nothing happened.how can get video off camera and on the computer?

  (In the AutoPlay dialog box that appears when you turn on the DV camera, click importing video.)
  It's # 2 on how to import the video but when I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic), nothing is happening... How to get my video on my computer and my video cam?... I also got told by sony I needed to cap analog, so I have I need to download something on internet even thought I have Director on my windows? IM so confused?

  Hi harleykristi,

  Welcome to the Microsoft answers site!

  Looks like the video camera (Sony trv608) is not compatible with windows vista, see the Sony link below:

  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=1452&MDL=CCDTRV608

  () Vista drivers are not available)

  You try to install the software that came with the device in windows XP service pack 2 compatibility mode. See the link below:

  Run the program compatibility Wizard

  1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.

  2. follow the directions in the wizard.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  For more information, see the link below:

  http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=CCDTRV608&loc=3

  You the best solution would be to check with Sony to learn more.

  http://eSupport.Sony.com/us/Perl/contact-land.pl?MDL=CCDTRV608

  Hope this information is helpful

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen

  Original title: green screen

  my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen. I tried all the options in F8 mode with no result. How can I fix it without losing any information on the hard drive?

  Hello

  1 - do you mean that you get the green screen even in safe mode?

  2 did you recent hardware or software changes to your computer before this problem?

  If you are unable to start desktop even in safe mode, then you try to perform the verification and startup repair.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

• Windows Vista Home Basic Edition keeps looping and will not start

  Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.

  I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.

  Bill

  If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Windows Vista Home Basic Edition does not detect networks wireless scope.

  running Windows Vista Home Basic on my counter top and it will not locate wireless... period. I know at least 3 in the box and he is always telling me that there are no wireless networks detected.

  On a side note, I installed my router wireless on my laptop (so I know it works!) and have successfully installed on my desktop as well (or if the installation wizard tells me) the top round works on vista premium and office is vista home basic, but for some reason, the office is always telling me there are no available wireless networks. I went through the installation wizard for my router wireless twice now and still that it prove when I go to "connect to a network.

  As much as I know there is no 'Wireless' or switch to be turned on anyway... There may be a command prompt to enable the wireless function?

  Hello

  Have you been able to use the network without any problem on your desktop computer wireless earlier?

  The following articles might help you solve this problem.
  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I can not connect on windows vista home basic desktop pc because of the former owner

  I can't log on to Windows vista home basic desktop pc because of the password previous owners is unknown

  Hello

  Try the following.

  Using another PC, download the app from the following link and save it in your downloads folder.

  PC login now

  Once the download is complete, open your download folder and double-click on the installer - this will result in another file, which is the disk image (.) ISO) you need to burn to a blank CD.

  Now, you will need to use an app like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When the disk has been created, shut down the PC you can not log on, press the ESC key as soon as you press the power button to access the Start Menu, insert the CD, select Boot Options (usually f9), use the arrow keys to select the CD/DVD drive and press enter - peut also have you to "Press any key" to boot from the CD if asked to.

  Follow the instructions on the guide here to remove the current password.

  Kind regards

  DP - K