my windows xp slow startup slow after windows loading

Similar Questions

• RESPONSE VERY SLOW AFTER THE START-UP OF THE PC.

  My PC has become very slow. When I start my all right, but
  When the desktop I have to wait at least 7-8 minutes before updating it the first time.
  If I don't wait and refresh it just after the start and then very slow after clicking answers, then after
  sometime, windows Explorer stops working and I have to restart my PC.

  I don't know why this problem is ancestral. I thought before formatting my PC and heal
  I ask you all if you have any solution.

  I tried all possible measures such as:-1. using the system configuration to stop unnecessary programs from startup.
  2 using the Disk Defragmenter.
  3 using CCleaner to remove all files of PC unnecccessary.
  4 using the KASPERSKY INTERNET SECURITY 13, I scanned and found 0 THREATS.

  I have 320 hard drive with two local drives: 1. (c) 17.5 GB free 99.9 GB;
  2 (D :)) 27.4 free GB of 198 GB.)

  System information: -.

  -------------------------------------------------------------------------------------------------------------------------
  Operating system: Windows 7 Home Basic 32-bit (6.1, Build 7601) Service Pack 1
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: G41M-ES2L
  Processor: Intel (r) Core (TM) 2 Duo CPU E7500 2.93 GHz (2 CPUs), ~2.9GHz
  Memory: 2048 MB RAM
  Available OS memory: 1916MB RAM
  Page file: 1385MB used, 2447 MB of available space
  DirectX version: DirectX 11.

  Please HELP me ON THE above of PROBLEM as SOON AS POSSIBLE! I have!

  Thank you...

  Yuvraj

  This Jetta post may be of interest:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-to-make-Windows-7-32bit-into-64bit-with/5b4581fc-2e68-49A0-a529-28257d00e069#LastReply

• Vista running slow after update 11/05/2011 dealing with Outlook 2007

  Vista Home Prem running slow after update 11/05/2011 dealing with Outlook 2007. Now, it takes 30 to 45 seconds to open Outlook, or any program. I'm under IE 9.0.8112.16421.

  The installed updates were:

  Update of security for Microsoft Office System 2007 (KB2540162)

  Update for the filter of junk e-mail in Outlook 2007 (KB2536413)

  Update of security for Microsoft Office PowerPoint 2007 (KB2535818)

  Update for Windows Mail Junk e-mail filter [May 2011] (KB905866)

  Windows malicious software removal tool - may 2011 (KB890830)

  Update for Microsoft Office Outlook 2007 (KB2509470)

  Can anyone help?

  Thank you

  Tony

  Hi Tony,.

  You can try the following steps and check.

  Method 1:

  You can try to run the performance fix and check.

  Check out the link:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  You can also read the following article and try the suggested steps.

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  For more information, see the links:

  Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Hope this information is useful.

• Sytem Slow after update

  My system is now very slow after updating my Windows 7 ultimate

  http://Windows.Microsoft.com/en-AU/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Optimize Windows performance

• Get the guest OS unusable slow after a few hours / after restoring a snapshot

  Running an early 2009 Mac Pro with 10 GB of RAM, 2.66 Quad-Core Intel Xeon CPU, OS X 10.10.2. 7.1.1 the merger.

  I have a question where a guest OS I am running under Fusion will get inevitably unusably slow after that it worked for a while. Usually what happens is when I start the system, everything works well, and then after an hour or two, it will start running very slowly. Very basic operations like moving a window all about take a few seconds to complete, and I can see the screen slowly updated the window moves. Another example is by clicking on a menu in the menu bar might take several seconds for the menu even start drawing, and then a few seconds more for what it ends and during this time where the BONE is otherwise unresponsive. Essentially, the interaction of basic with the operating system is very difficult. If I stop the operating system and then start it back up again, it will resume performing normally for another hour or two.

  If I record a snapshot of a system and restore later, usually (but not always) will trigger to poor performance and I have to completely farm the guest operating system and start again it upward to fix.

  This happens regardless of which is the guest operating system. I did experience in OS X 10.6 - 10.9, Windows XP and Windows 7 32 - bit and 64 - bit.

  So far, I tried affecting versions material of these VMs to 10, as was recommended in other threads I've found to fix this exact problem. However, it is not fix things for me.

  Does anyone have an idea, what the problem? I'm quite like merger so far, more Parallels, but with this question, it is very difficult for me to get work done. I hope it can be resolved.

  Thanks in advance!

  I had the same problem since V7 came out.   At one point, from 1 hour to 7 days, all my virtual machines would slow to a crawl.   The only solution was to close all, vmware close and restart.   I spent months to fine-tune different settings.

  I did a few manual tweaks after searching on the net and see some common parameters which have been recommended.   After 4 to 6 weeks, my problem has not reappeared.   I don't know which of these parameters has solved my problem, but you can give them a try.   I don't have an SSD if you may or may not want to use the virtualSSD parameter according to your configuration.

  The settings that I have added are:

  mainMem.backing = 'swap '.

  scsi0:0.virtualSSD = 1

  MemTrimRate = '0 '.

  sched.mem.pshare.Enable = "FALSE".

  MemAllowAutoScaleDown = "FALSE".

  As usual, save your vm and use at your own risk.  They have worked very well for me so far, but each installation is different.

• Startup error message: error loading of C:\ WINDOWS\azizoqocefuwejat.dll

  Nice day

  I sent my computer to be restored and cleaned of the virus. (Computer HP with Windows XP, Service pack 3)

  Error message appeared after about third computer startup.

  Error loading of C:\ WINDOWS\azizoqocefuwejat.dll

  The specified module could not be found.

  Unplugged the computer and set it aside for a fight a year.

  Not dusted him off and in the hope to use again.

  Removed all kinds of programs (IOBIT, etc.)

  Because the computer was restored, began upgrading computer from Windows Update Update Manager

  then installed the Norton 360, 30 trial days

  analyses complete completed camps, who has not identified problems

  Disk Cleanup

  Registry cleaning

  Googled the dll and nothing at all is listed

  What is this error message?

  How can I get rid of this error message?

  I have several computers and my cell phones set up shared radio router, do I need to worry about cross-contamination?

  Thanks in advance for your time and your consideration.

  Additional thoughts:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you actually solve the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz".

  RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz". I also noticed my cpu runs sometimes very high without running programs. audit in the process, it seems to be the system idle using a lot of cpu. My pc is several years old and think of memory starting to dissapate, I tried to remove the afew channels recently and I was wondering if that has something to do with the error.

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Put the computer to boot and see if it helps.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
   
  Method 2: Perform the steps from the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
   
  Method 3:
  Run a full scan with your antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Hope this information helps.
   

• Satellite A100 - Internet becomes slower after 10 minutes

  Hello

  the Satellite A100 worked well for a few years, the internet has become suddenly too slow after 10 minutes of the start.
  The laptop switched on the first time that the internet works very well the 10 first minutes then becomes slower and slower until almost no packets are received but the connection does not completely down.

  Suspected spyware, rootkit, is cleaning up, and then installed from the disk recovery

  Then I tried the same thing. Uninstalled the connection to the local network and then reinstalled from the Device Manager, nothing.
  I figured that the Ethernet port is a failure. Then I used an adapter usb-to-Ethernet D - Link is completely independent of the integrated Ethernet hardware. Nothing, same behavior, working, first fine then Firefox displays a downtime

  The modem, cable, internet are all very well since I have tested with a PC and a laptop Fujitsu (5 years) and they all work very well. Even the D-Link works fine.
  The Toshiba pc diagnostic tool specifically says "Network Fail", but it crashes exactly?

  An idea or a similar experience?

  Hello

  Hmmmmm... It sounds quite complicated.
  What is with WLAN? Have you noticed the same behavior using the WIFI connection?

• Safari is very slow after downloading the latest IOS on my MacBook Pro

  Safari is extremely slow after downloading the latest IOS on my MacBook Pro. Can we do anything?

  It was very fast.

  IOS is not running on a MacBook Pro. Do you mean that you went to El Capitan?

  When Safari is running slowly? When? What sites? Force Quit Safari and then start it again while holding down the SHIFT key. If Safari works as expected, then remove your installed Safari extensions. Restart Safari normally and add your extensions one by one until the slow back. You have now identified the extension at the root of the problem.

• Safari slow after upgrade of the El Capitan, Hideme install

  Why is Safari slow after El Capitan upgraded, or would it be Hideme

  You described your own next troubleshooting step.  Disable your proxy/VPN for a direct connection to the Internet through your ISP and see if your slow disappears.

• After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I am on Windows Vista.

  After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I picked up at an earlier date and reloaded the software TT 3 times with the same result. I tried of caraa start windows Explorer by using the Task Manager, but it does not work.

  Hi AndyCantore,

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• My windows live Movie Maker has an ER code 0 x 80004005, cannot display viedo of camer after down load, that its there just will not be open for the show.

  After down loading the camera viedo, it will not be open for show, but it's there, ER (0x80004005) it says Director windows live how I do to reboot?

  Have a look at the last 3 letters of the video you've imported to Windows Live Movie maker (WLMM).
  That the last 3 letters represent the format of the video file. If the format is NOT supported by WLMM, he won't play it.

  Here are the formats supported by WLMM:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If your video file format is not on the list above, google for a FREE video converter and it allows to convert your video file.
  The best format to convert is WMV. The most reliable and foo-proof format.

  PS, It might be better if you posted in the section photos and videos:
  http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows black screen after the loading screen

  OK, so when I start my computer, it loads ok until it reaches the windows loading screen then the screen goes black. I can see the good mouse but that's all. I can also spam the 'shift' key and hear the sound of the keys sticky so I consist the computer is simply not exposed. IV looked on the web and say safemode works but it doesn't. IV tried to do a Factory Reset, but I'm not 100% sure how. If nothing else there can you please help me do this. I have a HP desktop computer.

  The help is GREATLY appreciated because I really need to use my computer. Thanks :)

  Hello

  To restore your system check with support of the manufacturer of the system as they all have their own methods.
  (See InPlace upgrade / repair Installation and recovery following Options.)

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  ================================================================

  Some of them may not work now however they are abandoned in just in case get you some
  access.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista - available Installation only if you access Windows
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Insert key to license after you uninstall Windows LOADER.

  Hai, my PC has been activated with the windows loader. Then I got a license key for my friend. I have uninstall the windows loader and insert the license key, when I validate windows, he says that's not authentic. There is something broken or deleted I think it's because as the windows loader. So, after I validate, there are daily notification means that my windows is not genuine which it trouble me. But I can update my windows from windows update. Measures can solve this problem?

  Its possible is the key to product your friend is also not authentic or you need to reinstall Windows 7 from scratch.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• my computer suddenly slowed after full HDD

  my computer slowed after the drive hard but I have a lot. then I deleted some files to create enough space. After you delete the files, it works well after starting, and then slows down after a while. Help me please

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.