My world BB application installation fails - also the signing of key to past shows! Why?

Similar Questions

• BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

  I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

  Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
  The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

  I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
  As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

  I tried to uninstall and reinstall several times but still get the same message

  Help, what do I do to fix this?

  File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

  Hello

  A question: could you please post you completely portable model number?
  I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

  In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

  However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• The Service Pack installation failed with the 0x8e5e03fe error code.

  Hi all

  I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

  ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

  2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

  Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

  Error code: 0x8e5e03fe

  State: 7 "

  I took the following steps to resolve. but it's not helping me.

  1. I CA anti-virus, I disabled the Agent Client of CA.

  "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-04-16 15:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 753
  No error found.

  3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

  Please help me

  Concerning

  Ganga

  Hi Ganga,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

  Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

  

  See my response in audition 3 error with installation

• The message says the inconsistency in the data base of the installer and the installation fails. The summary of errors not display any errors. How to install LR?

  Message on the notification window "Inconsistency in the database of the installation program"and the installation fails. The summary of errors not display any errors. How LR to install?

  HI Pauld48784098,

  It will help us solve your problem if you can provide additional information. What version of Lightroom are you trying to install and what is your OS?

  In the meantime, this discussion forum, in which a user has experienced a similar problem, can help: "Inconsistency in the database of the installation program".

  Best,

  Del

• How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  Here you go:

  1. Control Panel
  2. Network and sharing Center
  3. Manage wireless networks.
  4. Right click on the wireless network unwanted.
  5. Delete

  Also note that since there is a network problem, a Forum that focuses on networking would be a better place to ask this question. This forum addresses issues of Windows security.

• The native application installer fails on Mac 10.5.8 times

  Hello

  I have an AIR 2.0 application native with a native installer I install silently as part of a series.

  On Mac, I have a DMG containing the application native installer and a shell script that copies the native installer application to a temporary folder, then call it passing "-silent" option.
  For some reason the native installer fails every other hour, i.e. If I install the application and then move it to the trash and then try to re - install, Setup fails.
  However, if I try to reinstall once more, installation is successful. I can reproduce this problem consistently.
  This seems to happen only on Mac OS 10.5.8. On 10.6.0 and above all seem to work fine.
  What can be the reason of this inconsistent behavior?
  Version of the OS is Mac OS 10.5.8, CPU: 2.8 GHz Intel Core Duo
  Here is the log for the cases when the installation program fails:
  Nov 10 20:19:08 Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Adobe AIR Installer.app/Contents/MacOS/Adobe Application Application Installer [9579]: checked Application signing

  Nov 10 20:19:08 Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Adobe AIR Installer.app/Contents/MacOS/Adobe Application Application Installer [9579]: unpacking/validation complete

  10 Nov 20:19:08 Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Adobe AIR Installer.app/Contents/MacOS/Adobe Application Application Installer [9579]: got an unexpected unrecoverable error while unpacking: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "" unhandled exception ArgumentError: Error #2004 "errorID = 2004"]

  Nov 10 20:19:08 Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Adobe AIR Installer.app/Contents/MacOS/Adobe Application Application Installer [9579]: end of the installer with the exit code 7

  Thanks in advance

  Anatoly Hello,

  Thank you again for providing your setup of the example program. I checked the problem at 10.5 using your program installation and in the terminal when the command line is preceded with "sudo".  It's now connected internally as bug #2758237.

  As a solution, could you try empty the trash before each attempt to install?  I found that in this way the installation program completes successfully whenever this has been done.

  Thank you

  Chris

• New installation fails during the expansion of the files Windows 7 Pro

  Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

  Motherboard: MSI MPower Max
  CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
  RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
  SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
  HARD drive: Seagate 750 G 7200 RPM SATA II
  Video: EVGA GeForce GT 2 640 GB
  Case: Corsair 400R
  Power supply: Corsair TX650M
  CPU cooler: H80i
  DVD: HP, BluRay BD R/W drive
  OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
  CPU Temp is around 42 C.

  If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

  As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

  =============================================================

  It's the set of test utilities that I use on every new system that I'm building.

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of HDD sank medium over the past 18 months.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ============================ SSD Test Software =============================

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Life of the SSD: http://ssd-life.com/

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Adobe DC installation fails after the most recent Windows and Mac updated

  During the installation of package (Adobe Creative Cloud) process stops, and then comes back.  Installation seems to be failing when the version check.  Tried the package and install separate;  No compatibility not test Adobe CC cleaning tool are able to correct the problem. Compatibility mode installs all applications except Adobe DC.

  Resolved for Windows 10.  Suite cannot be installed using MSI, instructions included with the configuration application require it be used.  Unable to solve the problem with the iMac OS 10.11

• LyncVDI.exe installation fails on the t610 with WES7

  I tried to install LyncVDI.EXE on a t610 with WES7.

  I have looged on administrator, disabled the filter entry and I just got a message "installation failed."

  Any hint to someone?

  You must ensure that your TEMP folders are not z:\temp.

  z:\Temp is a based RAMdrive folder and the RAMdrive is 32 MB by default.

  You can use a temporary folder on C: (for example, c:\temp), a network of road; a USB key.

  You can temporarily change the folder temp with the following commands in a Command. The EXE window:

  If not exist c:\temp\nul mkdir c:\temp

  Set temp = c:\temp

  the value of the tmp = c:\temp

  [PathToLyncvdi] \lyncvdi.exe

  If you want to use something other than c:\temp, change the commands accordingly.

  [PathToLyncVDI] should be replaced with its actual path.

  Tell me if it worked for you

• OfficeJet 8600 installation fails with the error 25024

  Had to replace a 8600 printer. Added the new device, but analysis wouldn't work on the second computer, nor the HP application would launch. Tried to reinstall the driver but it fails stating that he cannot remove the old device. In the case of the Viewer, it displays an error 25024. I tried to install from the CD & download. He has worked on the other computer, but this one may not remove or install correctly. I tried to run the scrubber v14 but who does not find a device and said has some files to remove, restart, attempt to install and always fails. The scrubber removes all entries in reg etc. and which is the right to use one?

  Win7 64 bit

  OfficeJet Pro 8600 - attached to the network (wired).

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4323659

  Install and let me know the result!

  Have a great day!

  -Spencer

• Windows 8 installation fails with the error "the product key entered don't match any available to install windows images.

  I have a Sony Vaio SVE1113M1EB provided with pre-installed Windows 8. Yesterday, my laptop won't start and recovery tools did not work. Then I deleted the partitions in stock and tried to install Windows 8 on DVD. He said: "the product key entered is not one of the images available for installation windows." I wrote my product key. How to install Windows 8?

  Original title: Installation of Windows 8

  Hi Qadir,

  The issue could be due to the supplied product key does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  I hope this helps. If you have any other questions, we will be happy to help you.

• Installation failed in the MAO "Admin privileges".

  Hello

  I'm under 27 "iMac, mid 2011, OSX 10.8.3. When I try to install Photoshop, I am prompted to enter my Admin password. The password is accepted, but MAO told me that the installation failed because "administrator privileges are required for installation." One account on the Mac and it's the admin. A set the download for "Anywhere" permissions in the security and privacy preferences panel. Have firewall set to "automatically allow signed software to receive incoming connections. I'm puzzled.

  EDIT * uninstalling and reinstalling MAO seems to have solved the problem. My setting listed above have not changed. Thank you *.

  Sanani64 says: * uninstalling and reinstalling MAO seems to have solved the problem. My setting listed above have not changed. Thank you *.

• Found on the back of the computer, product key but it shows invalid product key

  Hi I brought a new computer with windows 2010 Home Basic installation. I found the product behind the computer key and I tried to put the same thing for the installation process. Unfortunately, it's showing the valid product key. Please help me find the solution.

  What you trying to do with the key?