My XP PC stop unexpectedly without any error message

Similar Questions

• CHKDSK stops without any error message

  A week whenever I turned on my computer, CHKDSK has started checking my files. On the second part of the check-up (usually around), he simply stops and sends me on the desk. I don't get any error message or such and my computer works well if you do not take this into account. Even though I'm a little afraid that it might be a sign of something not being right. I am looking for a way to solve this problem and make CHKDSK to conduct the audit.

  I ran Ad-Aware and Spybot but they did not help. Also ran CCleaner to check changes to reg, but it wasn't good either. That's about where my own knowledge ended and I tried to use google. All I could find is that the formatting of the computer and reinstall windows might work but I have not tried because I don't want to lose my files.

  I am running Vista Home Premium with Avast! Antivirus, if that's any help. Thanks in advance.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

• Updated repeatedly offered KB2686509 for Windows XP but it fails to install without any error/message code. Ideas?

  The analysis of windows update says that no critical updates are available.  However, Secunia scan says my Windows is vulernable because the security KB2686509 patch is not installed.  My tool bar constantly shows the yellow shield indicating that an update is available. When I click it, it initializes successfully but gives a message that KB2686509 has failed to install.  There is no other error code of the message on the nature of the problem.

  See the RESPONSE messages in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

• Firefox closes randomly without any error message

  No matter what site I'm on and sometimes even when the browser is reduced to a minimum and not used. The window disappears as if I hit the close button, then when I run the browser usually brings my tabs back up or show me the window 'it's embarrassing I would say that it happens on every half hour.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Software CC stops after 1/3 of a second - launches a complete interface, closes unexpectedly with NO error messages

  Can someone help on the specified problem?

  I lost hours to talk to people on the Adobe chat now.

  I signed up for student Creative Cloud yesterday. Started the download and installation of InDesign and Photoshop. Both programs stop about 1/3 of a second after the launch. The software starts with full interface and then closes WITHOUT any error message.

  I also tried to open InDesign projects that I copied from another computer. It will load perfectly fine, but request directly to save them, and after that it stops.

  It this technical problem? Account number? Please help - deadlines are coming up.

  Hi SvenWolters,

  What operating system do you use? You have an earlier version of Adobe installed on your machine?

  Kind regards

  Romit Sinha

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Windows Update updates & any error message

  I have Windows Vista Home premium and I can not install updates.  The "install updates" icon in the status bar, and when I click it, it says that I need to check the updates on my computer (currently set to download and let me choose what to install).  When I click on "check for updates" it takes a few minutes and tell me I need to 'install new windows update software", if I click to do this, so I'm back to square 1, 'install updates' and the circle continues.  Problem is that no error message is given, I'm just stuck in a loop.  Occasionally, when I restart the computer, it will show the updates there and I can install them a few at a time (usually takes some time, because they will refresh not fully without me reboot (not where it tells you normally ' computer must be restarted to complete the update)... which means it shows 'download and install' forever) then I reboot, and it's all better (for now!)  I searched everysite I can find, but all seem to correct an error #, not only the loop blocked without an error message.

  Hello Ohanaof3,

  Thank you for using Microsoft Vista answers Forum!

  This problem may be caused by a temporary folder of Windows Update corrupted or third programs blocking access to the Windows Update site.

  Also, look for a spyware infection or software viruses malware on your PC.

  In addition, the issue could also be as a result of some of these conditions listed below

  ·         Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.

  ·         Cryptographic services is set to disabled.

  ·         Other Windows files are corrupted or missing.

  ·         The timestamp signature or the certificate cannot be verified, or is incorrect.

  For more information on how to fix this error, I suggest you follow the steps in the link below. Different methods are available, use only one at a time. Once your problem is solved, you don't have to go through other methods

  http://support.Microsoft.com/kb/822798

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Adobe Creative Cloud Desktop App closes without any error in the middle of the installation

  Hi all.

  I had a few struggles since this morning...

  Building 30 GB Photoshop file for a large project and could not open the file or any other PSB I built in the course of 5 weeks - went into the rabbit hole problems...

  now, I'm here...

  Impossible to install same adobe Creative Cloud Desktop App to start from scratch. The Setup program closes without so much as an error message. The screenshot is just before the time that the installation of adobe disappears. Very annoying. Someone knows something about this problem?

  I can give more context for how I got here and all the problems, I fell along the path/steps that my work to correct if nobody's got an immediate response.

  I need to get this project finished tomorrow .

  

  FYI, ProDesign tools has updated their website. The new installer, ACCCx3_8_0_310.dmg, can be downloaded here, Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  Kent

• DBMS_SESSION exception without any error

  Hello
  
  I cloned an Oracle 9.2.0.6 production database for test. We have cloned the database in the past using the same procedure without any problems. However, this time he gave problem form 6i and form 10g.
  
  When the procedure DBMS_SESSION.is_session alived or dbms_session.is_role_enabled, he always exception. I created a form a button that runs this code:
  
  PROCEDURE DBMS IS
  test BOOLEAN: = FALSE;
  BEGIN
  msg_info ("this message before running '");
  test: = DBMS_SESSION.IS_ROLE_ENABLED ('CONNECT');
  msg_info ("If you see this message, code run successfully");
  Exception
  while others then
  msg_info ("If you see this, code was NOT executed '");
  END;
  
  -clone db output: If you see this, the code did NOT
  -output in any db: If you see this message, code run successfully
  
  However, if I run this form using any other database it run successfully. If I point to this new database of clone, it has always attracted exception with no reason.
  
  Anyone know how to fix this?
  
  Is it possible to have the form to post an error message that would help us solve the problem?
  
  I am completely new to the form. I'm a database administrator.
  
  Note: dbms_session.is_role_enabled run OK in the clone database if using sqlplus:
  
  BEGIN
  IF dbms_session.is_role_enabled ('CONNECT') THEN
  dbms_output.put_line ("'CONNECT is granted");
  ON THE OTHER
  dbms_output.put_line ("' the CONNECT is not given");
  END IF;
  END;
  
  -output: CONNECT is granted
  
  Thank you very much for your help.

  Sound - Interesting DR. I use the form 10.1.2.0.2. Can you give me the steps?

  There are two modes of operation of the DRA. First, on the application server and then the forms generator. The setting is the same for everyone, but the first configures the application server and then configure your workstation. You must change the following two files: default.env and formsweb.cfg. These two files are in the \DevSuiteHome\forms\server directory.

  default.env
  Add or change the following variable:
  FORMS_TRACE_DIR =

  I'm writing my logs in the directory \NETWORK\log for my entry looks like the following:

  FORMS_TRACE_DIR=\NETWORK\log
  

  formsweb.cfg
  Add or change the following variable:
  otherparams = log out = =

  I use a generic log file name, but you can use a name that makes more sense.

  I recommend you put it where you want only, the session of forms written in a log file. Also, if you're this change on the application server, I recommend that you create a custom in the formsweb.cfg configuration so it is enabled only when you pass the config parameter in the URL of the application. For example, I created a configuration called my_frd that allows me to run the Dr FUND by adding *? config = my_frd * to the URL. Here is an example of the changes that you need to do.
  1. open the formsweb.cfg file and go at the bottom of the file. Then add the following text:

  [my_frd]
  otherparams=record=collect log=frd_trace_log.txt
  

  Now, when you run your application, you simply add? config = my_frd to the url to activate the trace FRD file. For example, if your application URL:

  http://.com:8889/forms/frmservlet

  What would be your URL to allow the DRA:

  http://.com:8889/forms/frmservlet?config=my_frd

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

  Published by: Silvere November 1, 2011 13:58

• Illustrator can not install without any error code.

  When I try to open it, it says "resource files located for this application could not be loaded. Please reinstall or repair the application and try again".

  I tried to use adobe repair tool. I tried to re - install, but it did not work. All other applications seem fine.

  A few months ago, I tried to reset my windows, but it did not work.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  try to install again.

  If you see the non-specific error message, troubleshooting installation using newspapers in Photoshop Elements

• PAGE_FAULT_IN_NONPAGED_AREA Stop 0 X 0000050 error message (0XBAD0B148, 0 x 0, 00000002 00000000, 0X805B0BCA)

  Hi people:

  Thanks for any help you may be able to give!  I am a real novice at the request for such assistance, so please, I need your understanding and your patience.  I searched the web, forums and site windows.com.  All I got is, sorry, your search did not reveal an answer.  This problem exists on my wife's cell phone, but only after she used it for awhile and then it allows to sit unused, still for a while.  How long before that happens I can't say, because I usually notice it after that she went to work.  This has happened for the fifth or sixth time now.  If stop us the laptop and then restart it, it works without problem, until it rests still.  I have him, I asked that she installed lately, and she said nothing.  I can usually solve our problems of PC and set "the blue screen of death" before, to find answers on the line, but not this time.

  The OS is completely updated to Windows XP Home Edition that came on laptop Acer 2310, but I'd love to get rid of it and use XP Pro, but...

  I hope someone can it send me a solution for this problem of blue screen.

  Thanks again and have a great day

  Claude

  Hi Claude,.

  You can try these steps and see if it helps.

  Step 1:

  You can read the following article and see if it helps.

  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

  Step 2:

  You can also try to perform a clean boot and check for the issue.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Firefox 3.5.1 running Vista has stopped working. No error message. Tried to uninstall and install also the latest version and get a message saying that I must first close Firefox (which of course obviously does not work)

  Firefox 3.5.1 running Vista stopped work, no error message. Tried to uninstall and install the updated version. Download the message that I first need to close Firefox, but it is not obviously executed.

  This has happened

  Don't know how many times

  I restored my system to an earlier date, December 2009

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; Dealio Toolbar 3.1.1; .NET CLR 3.5.30729; .NET CLR 3.0.30618; NET4.0C; AskTbWCL/5.8.0.12304)

  Firefox can not run visibly, but is probably running in the background. It is in the Task Manager. To access the Task Manager go to Start and type in taskmgrsearch field. This will open the process task manager. Then go to the tab processes and end firefox.exe. After the end of this process, close the Task Manager and try to re-run the installation/uninstallation.

• I can't open my Dungeon of docs word any error message "user lacks access privileges.

  I can't open my imported word docs Dungeon receive an error message 'user lacks access privileges' ideas of what she may be contacting Apple and they tried a lot of things and tell Microsoft that the docs are corrupt and nothing wrong with the word 2016.

  More info, please.

  When you say that it is "any word docs", do you mean another user on the same Mac, another Mac, an earlier version of Mac OS X, an earlier version of Word, another type of computer, from another type processor, or something else?

  These documents are currently stored in your Documents folder, into another directory user on an external drive, on a server, or elsewhere?

  You do it on El Capitan? What version of 10.11.x?

  Your copy of the word 2016 is perfectly up to date?

• Designjet 510: Designjet 510 starts printing, then everything stops and "blocks" no error messages...

  My normally reliable Designjet 510 suddenly started having problems printing: it starts to print my drawings, no problem, but it suddenly stops and just print head 'crashes' and no longer print.  He sometimes starts from the beginning of printing, he sometimes almost at the end of the drawing before it stops, but he can't seem to finish the print job.  The printer does not display an error message, it still shows that it is printing, but no matter how long I leave, it will not at the end of a drawing.   I'm on Microsoft Windows 10 - there was a hiccup when I upgraded Windows, but after reinstalling the printer driver, it seems to work again no problem.  I'm tearing my hair out (and lose large amounts of paper) trying to get anything to print!  Pointers would be welcome.

  Thank you.

  P.S. I posted this problem previously, then thought I had sorted by adjusting the settings of the printer, but she went back, and I am no closer to knowing why!

  How is the printer connected?

• Windows stops and displays the error message with the file wpfb_ati2dvag

  Windows stops and I get the message that I have a problem with the wpfb_ati2dag file. Is there any solution for this?

  Hi Nancy,.

  It seems that the problem you are experiencing is related to the ATI drivers,
  Try to update your drivers to the latest version:
  http://support.AMD.com/us/gpudownload/pages/index.aspx
  Hope this helps and let us know if you need help to identify the drivers you need.