My YouTube Player is only half shown.

Similar Questions

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• Enter an interactive Youtube player on board animate - doesn't work does not correctly!

  Hi people!

  I'm working on a new project that is based on an interactive web video.

  In the edge animate proyect I implemented a player full screen Youtube has interactivity. On the one hand, in the edge project, I've included a JS that contains the definition of the Youtube API reader and all its functions to allow interactivity. On the other side, in the HTML code that creates the edge animate, I've included the div for the player and a few buttons to play and stop the video.

  When I run the Web site using Dashboard animate everything works correctly, but when I open the HTML file without edge animate, the Youtube player is not defined (the player div is empty). I think that the problem may be related to the external JS file in the dashboard project.

  I do not see why this external JS with the functions of Youtube load only when it is started from the edge soft Animation.

  My goal is to load this project as an include file OAM end in Wordpress with the Youtube player and its interactivity.

  Need help for this question! Some know how to fix it?

  
  

  Conclusion:

  Animation full screen with Youtube Player as a backdrop with a few buttons in the project file HTML to play and stop the video. YouTube API functions inside an external JS file and included in the project of edge animate. Only works when the animation is launched with edge animate. If the HTML file is opened directly, the Youtube player is empty.

  PD: I am attaching some pictures in order to provide a clearer picture of this problem.

  
  

  
  

  When you preview of Animate, content is managed from a local server. This security error is thrown on the opening of the file from the file system in the browser.

  If you download these files on a server and open them in the browser, they could still work

• YouTube Player Shockwave Sprite

  I am trying to embed FLV from YouTube videos in a member of the distribution Flash and sprite. YouTube has an ActionScript 2 API for their player and I use Director 11 and Flash CS 3.
  
  http://code.Google.com/APIs/YouTube/flash_api_reference.html
  
  I need to shoot from YouTube, I can not download disk and then use them.
  
  I can integrate a film with a component normal FLVplayer and he can play the video on the net. Lingo is not really do something here. The ActionScript code looks like this (CODE SNIPPET 1):
  
  But using the YouTube Player, that I need to use their API, so the code looks like this (CODE SNIPPET 2).
  
  When I test the movie by Shockwave, it loads the reader and ytplayer.isPlayerLoaded returns true, but the video does not play.
  
  Does anyone have ideas, what could be the problem? When I just publish Flash all works. I think I'm close...

  Had, it works:

  http://www.ourwebhome.com/dig/you/yt1.htm

  I used great AS2 API of Shane of:

  http://www.lostinactionscript.com/blog/index.php/2007/10/13/Flash-you-tube-API/

  The only thing I had to add was a code to initialize the sprite:

  property spriteNum
  on beginSprite
  FS = sprite (spriteNum)
  fs.actionsEnabled = TRUE
  fs.buttonsEnabled = TRUE
  fs.eventPassMode = #passAlways
  end

• Firefox imports only half of my favorites of IE

  When I try to import my favorites from internet explorer, only half of my favorites (a - m) are transferred. Is it possible to increase the capacity of the folder?

  If you have problems with importing IE bookmarks in Firefox, then export favorites in Internet Explorer to a HTML file and import this file in the Firefox Bookmarks Manager.

  If you don't have the menu bar in Internet Explorer, and then right-click on the toolbar above to activate the menu bar.

  • Export Favorites in Internet Explorer to a file (bookmarks.html) HTML:
    File > import and export
  • Import HTML file in Firefox:
    Bookmarks > show all bookmarks > import and backup > import bookmarks HTML: file

  See "Import from another browser" and "import from file":

  • http://KB.mozillazine.org/Import_bookmarks

• Only half of the icons showing on personal bar

  Only half of the icons showing on the bookmarks toolbar, but when I go in the toolbar custom, then click on 'Done' they appeared all over again.

  Thank you... I downloaded the latest edition, and that seems to have solved the problem.

• The sound on Youtube repeats in about half a second then several voices

  The audio on YouTube starts, then about half a second later the same sound again so both play at the same time. It is so distorted I can't sound for one of the videos.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Help! My MacbookPro is super slow (and the HD is only half full)

  I'd appreciate any help as I can get before I have to spend a fortune upgrading to a SDS or increase the RAM memory.

  I have a mid-2010 Macbook Pro (2. 4 Ghz) with:

  -4 GB RAM

  -500 GB HD (219 GB available)

  (Please let me know if any other card would help).

  My laptop is super slow, even with the most basic applications. Even if I did open and simply start Microsoft Word, it will show the wheel rotation for a good minute or so, before the opening. Of opening PDF, preview, and even changing the tabs on Firefox can match the same offset (the degree varies). Nevertheless, it is frustratingly slow, and everyone who uses my computer says this. My friends MacBook which is even older than mine doesn't have this problem.

  Because I do a lot of graphic design work (using Photoshop, Lightroom and various browsers open at the same time) I was told that increase the RAM will help my problem, as would an SSD. While I understand the applications I use are eager for RAM, I can't be certain that this is my underlying problem of laptops, since even simply opening a web page is filled with serious delay (when no other application is open).

  I'm also not sure if an SSD would be helpful since my HD is only half full (or empty depending on what you would look like it). This sounds like a problem with the HD cable? Or any other problem?

  Thanks, I'm a novice when it comes to such things.

  Download and view a report of Etrecheck:

  http://www.etresoft.com/etrecheck

  Ciao.

• HP Envy H8-1549: computer doesn't recognize only half of the new Ram

  Hi all.

  I took a set of ram Ripjaws X 32 gig (4 x 8).  When I install all four chips, only half of them are recognized by the Bios. If I remove two, both of which have not been recognized are visible and working in the same locations they were. It all works, but not all.

  Current configuration: http://support.hp.com/us-en/document/c03666767

  RAM: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231569

  Everything I read on my motherboard and ram has indicated that it is compatible. I updated the Bios and erased the CMS.  I'm a bit of a loss. Am I missing something fundamental?

  What is a tension problem? If so, how can I send it?

  RAM is usually such an easy upgrade. Not so much this time, it seems to me.

  Thank you.

  This seller has guaranteed 8 GB modules for the H8-1549 envy.  The specs are "CL11.

• Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Hi Jim,.

  1. What is the operating system installed on your computer?

  2. What is the format of the file you are trying to play?

  3. it worked earlier?

  I suggest you to follow the steps and check if it helps.

  Installation of the Codec and check if it helps.

  Codecs: Frequently asked questions for Windows 7

  Codecs: Frequently asked questions for Windows Vista

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Only half a page to print on Avery 5160 labels.

  Original title: labels Avery 5160

  Why am I getting only half a page of my Avery 5160 labels printed?  When I use the regular computer paper, the entire page is printed.

  Hello

  1. what operating system is installed on your computer?

  2. What is the brand and model of the printer?

  If you use the HP LaserJet printer then you can have a look at this article:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=412144&prodTypeId=18972&ObjectID=c00557679

  Check out these links:
  http://www.Avery.com/Avery/en_US/Help-Center/formatting-and-printing-tips/?NS=rank

  http://www.Avery.com/Avery/en_US/Help-Center/product-FAQs/?NS=rank

  Thank you

• Windows Media Player will only play a sound with no video .avi and .mov

  I started having a problem where the Windows Media Player will only play the audio portion of my .avi and .mov video files.

  These files were created by my FlipCam or my Sony Handycam.

  I never had problems until recently and think that it is due to some kind of Windows Update.

  Both my computer and my wife's computer had the same problem and we are both using Windows XP Home Edition.

  I apologize if this topic already on this forum.

  Thanks for any help and advice.

  CoDec = compressor decompressor.
  A program is used to compress the file. You then need to unpack the file to play, you need the codec used to compress the file to decompress it on your pc.
  You need DVD playing software installed to power the mpeg codec, or you can buy a codec to just run in media player.
  AVI is a wrapper and may well contain more than 800 different file types, it has 800 different codecs!  Thus, to read an avi file, you should know what codec was used to do and have that installed on your pc to read.
  DV.avi is made with the dv codec, divx.avi is made with the divx codec.
  Of course, that manufacturers make their codecs, you must make sure you have the latest being, to be able to read files made with it, so everything just because you downloaded the codec divx 12 months ago does not mean it will play files created with codecs of today!

  I hope this explains it is ok for you.

  It surprises me that you say that you have downloaded all the updates of altest, but are still running wmp9, where we are now on WMP11 for XP and 12 for win7.

  I would update my WMP version first.

  Here is a page that will tell you that the codecs are on your pc and who has access to WMP 11.
  http://www.myvideoproblems.com/tutorials/HowToFindCodecs.html

  Here is a page that will tell you how to know what codec was used to create the file that you are trying to watch and also if you have the right codec for it
  http://www.myvideoproblems.com/tutorials/AVIcodec.html

  It is generally accepted that the codec packs adding is a bad idea, so if you need a codec to read a certain file, google it's manufacturer and just install the one you need.

  I would work just on the pc at the same time when you found what the problem is, you can fix on the other 2.

  Need more help with this, just ask.

• HP Officejet Pro 8620 copier copies only half of the document

  During the adjustment of the glass my copier copies only half of the page. When cope since the charger it leaves one side of my page off the coast. I've only had it a few weeks and do not know what to do. Thanks in advance for any help I can get.

  Hello @mburrand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems to copy output.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In the meantime, I recommend that you perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• My Recycle Bin is corrupted, when I try to remove a program, it removes only half or parts of it.

  How to fix my Recycle Bin corrupted?

  My Recycle Bin is corrupted, when I try to remove a program, it removes only half or parts of it.

  Your basket has nothing to do with uninstalling programs. You're probably just remove a shortcut.

  Completely uninstall a program: http://teengeek.freehostingcloud.com/howtos/uninstallprogramswithrevo/