MySQL users group
I recently discovered that under system preferences > users & groups I had a new group called MySQL user group. Although none of my accounts have been checked / enabled in this group, I am concerned because I have not created this group. I recently installed XAMPP, which includes MariaDB but I remember ever install MySQL manually or the creation of this group of users. Is the group that is created by default in Mac OS X and I never noticed? Should I be worried?
MariaDB is not a port of MySQL? MariaDB created the group, I guess.
R
Tags: Mac OS & System Software
Similar Questions
-
MAC OS El Capitan 10.11.5
5.1.5 Server
xserver MAC hardware
I add user name and account in server 5.1.5. After a few users have added and little added group name. I check the list users and group and they seem good. in a few days later, I don't have a server change. I'm starting to capture more users. When I open the list of users, and I said ' WHAT *? Where * do they come from? "I like that ever before. I checked the list of groups. They have additional groups that I don't add them before as well.
Seemingly, however, groups and hidden accounts becomes visible.
My Question: Is it that I can hide back them as before?
These additional users/groups entered integrated system. Do not remove them!
They are normally hidden and you should be able to re - hide them by running Server.app then by going to the view menu and selecting "hide system accounts.
-
User group near Research Triangle Park
National Instruments organizes a usergroup near RDU February 23!
This is the first in a long series of presentations by Seneca5 hopefully.
The presentation is targeted from beginner to the experienced. We'll be modeling a control system using a cRIO with FPGA and real-time.
More information can be found at http://www.meetup.com/LabVIEW-User-Group/
Feel free to ask any questions.
That was fast...
-
Hello
I have a tab control that has 6-7 tabs. I want to show some tabs to normal users and I want to hide some tabs from these users, only Admins can see them. Is there a way to set the user access tab pages individually? In the tab control settings, there is only the security settings that apply to the tab control, not pages individually. I can show/hide the pages by program, but I need to know the name of groups (Administrator, operators, comments, everyone) to which the user is connected.
According to the page it is also not possible
Summary: How can I show/hide tabs depending on the user group?
I use Labview 2014 SP1 32-bit on Win8.1 with the DSC module
Ah ok
In any case, I managed to get this info with the palette of DSC security screws:
-
Required link that support it, upload, Tsinternet user group manager and the NNTP service is not longer involved in windows server 2008
Hi HP_990,
I would suggest to repost your question in our forums Windows Server TechNet here:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer
Thank you!
-
I can't start PC error "user group be found."
Original title: problem with user profile
I can't boot the PC, user group is not found. The data is there, but I can't. Most likely a virus. I ran virus apps but nothing helped. Any help appreciated.
Hello, Mike,.
See if this helps:
Unable to view or add trusted domain security principals are "members of" Properties tab
http://support.Microsoft.com/kb/237905
If you think that malicious software, restart your computer and start typing the F8 key
Select Mode safe mode with networking
Download the following tool and run a full scan
http://www.Microsoft.com/en-US/Download/details.aspx?ID=16
When you're done, restart and Windows loading
You can also try to create a new user profile. A test to see if the same problem arises when you use the new profile. If this is not the case, your may be damaged.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Me locked out of my user group, the Aministrator leaves me not in
I have Windows 2000 on my computer that has an administrator, I had someone come and they tried to get on my internet so I set a password here and didn't know what to do would be to lock me up. Can I still use my password, but it doesn't allow me to do updates, download my photos. my camera or something. I can't the Aministrator for me to come back in the users group as if I was before I put the password. I NEED HELP! Before the Aministrator connected and I had total access. How can I get that back? I tried over a month, I'm tired! PLEASE HELP ME! Thank you, Alice
Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Add the user to the users group in the Users.ini file using c#
Hello
Using a c# application, we strive to add/remove a user from the TestStand Users.ini file.
The CreateDeleteUsers.seq file in the samples of TestStand is used as a reference.
We have seen that we are able to add the user to the list of user help file
engine. UsersFile.UserList.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());
However, when we try to add the user to the user group, the sample file CreateDeleteUsers.seq said
RunState.Engine.GetUserGroup (Locals.GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, Locals.User.AsUser.LoginName)
If we try to replicate this in c#, the API seeks the last parameter (which is LoginName in the CreateDeleteUsers.seq file) as an object of property
engine. GetUserGroup (this.) GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());
This causes an exception of object reference when we run the application.
Please advise on how to proceed.
Thank you
Arun-
The members property is an array of string, so the 3rd parameter to SetPropertyObjectByOffset requires a string property object, IE. the user name and not of the user object. From the will of the user object error with '-17308; Specified value is not the expected type. ». The example should really be using SetValStringByOffset to be clearer so that you only specify the user name of the actual string.
-
remove the domain to a domain computer users group
I have installed a computer in the field and that you wanted everyone to sign on the computer. Our policy has changed and now we only want one user to be able to log on to the machine side comes from the admin I've added to the domain to this machine users group after adding it to the domain. How can I remove the domain users of a machine group already in the field, and I don't see the group in the list?
Thank you in advance,
John C Owen
In General, people who can connect to a machine (and are not administrators) are members of the group "users". As an administrator, if bring you up a prompt window commands on this computer (start-> Run-> "cmd") and enter the command:
net localgroup users
you will see the members of the group "users". One of the entries will probably be:
mydomain\domain users
where 'mydomain' is the name of your domain.
All you need to do is remove "domain users" group. From a command prompt:
net localgroup "user mydomain\domain" / delete
Check other groups (power users, etc.) and make sure that "domain users" are not listed in groups either. You can then add your unique user in the users"" group.
net localgroup users "mydomain\singleuser" / Add
HTH,
JW
-
WinXP
user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is adminI did a gpupdate/force and restart twice PC
Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all usersHi elena_ad,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/winserverManagement/threads
-
Several downloadable ACLs by ACS user group
It is possible to map several downloadable ACLs to a single user or group of users use ASA and ACS?
For example, you have an ACL controlling access to servers (ACL A) and another ACL (ACL B) internet access. Is it possible to assign several ACL to a group of users, such as user group can only access the servers, while the user group B can access servers and internet (ACL A + B ACL)?
Thank you and best regards.
George,
The user and group settings only would allow you to select only a single instance of DACL list at once.
Kind regards
Jousset
The rate of useful messages-
-
AAA RADIUS authentication for the only user group
Hello
I use ACS3.1 and tries to use authentication radius for all network switches in my company.
Meet the im problem now is how to restrict only a user group to access the connection/exec switches? It seems that all user IDS in my acs able to telnet (user access) to the switch (using their login credentials).
I would like to limit still from telnet by using their ID except administrator group.
Counsel on how this is possible.
TKS!
The GBA, you need admin users in their own ACS group separated, leaving other users in their own group also.
Change the group that contains the users you don't want to give access to and under the heading of restricted access network (OAN), in "Group defined Network Access Restrictions", check the "Define based on IP access restrictions", choose "Rejected the call point" and enter switches in the table below (put a * in the port and address).
This prevents standard users authentication to switches. You can add all your switches in a group of network devices (NDG) to this, then you have to add that, in the section NAR rather than adding each switch individually.
-
ISE / Active Directory: question to get the users group
Hello
There is a strange problem:
-Patch 1.2 ISE 8
-No WLC, autonomous AP
In authentication, we check wireless IEEE 802.11 (RADIUS) and cisco-av-pair (ssid), then we use AD.
We have 3 SSID, so 3 rules, a GIVEN, one INVITED, one for the INTERNET.
In a settlement more than grant permission of APs to save to WDS authentication: user in the local database.
In the authorization, we check cisco-av-pair (ssid) and the Group of users AD, then we allow access.
(so 3 rules) and a more to allow the basic internal for WDS.
We have something strange:
-Sometimes users can connect, but later they can't: the newspaper permission rejects the user because the ad group is not seen.
Example:
1 OK:
Details of authentication
Timestamp of source 2014-05-15 11:43:19.064 Receipt of timestamp 2014-05-15 11:43:19.065 Policy Server RADIUS Event 5200 successful authentication All user GROUPS are observed:
fake AD ExternalGroups XX/users/admexch AD ExternalGroups XX/users/glkdp AD ExternalGroups x/users/gl journal writing AD ExternalGroups XX/users/pcanywhere AD ExternalGroups XX/users/wifidata AD ExternalGroups XX/computer/campus/recipients/aa computer AD ExternalGroups XX/computer/campus/recipients/aa business and cited AD ExternalGroups campus of XX/computer/campus/recipients/aa AD ExternalGroups XX/users/aiga_creches AD ExternalGroups XX/users/domain admins AD ExternalGroups XX/users/used. the domain AD ExternalGroups XX/users/replication group does the rodc password is denied AD ExternalGroups XX/microsoft exchange security groups/exchange view only administrators AD ExternalGroups Directors of XX/microsoft exchange security groups Exchange public folders AD ExternalGroups XX/users/certsvc_dcom_access AD ExternalGroups XX/builtin/Administrators AD ExternalGroups XX/builtin/users AD ExternalGroups XX/builtin/account operators AD ExternalGroups XX/builtin/server operators AD ExternalGroups distance of XX/builtin/users of the office to AD ExternalGroups XX/builtin/access dcom certificate service RADIUS user name xx\cennelin IP address of the device 172.25.2.87 Called-Station-ID 00: 3A: 98:A5:3E:20 CiscoAVPair SSID = CAMPUS SSID campus of 2 NO OK no later than:
Details of authentication
Timestamp of source 2014-05-15 16:17:35.69 Receipt of timestamp 2014-05-15 16:17:35.69 Policy Server RADIUS Event Endpoint 5434 conducted several failed authentications of the same scenario Reason for failure 15039 rejected by authorization profile Resolution Authorization with the attribute ACCESS_REJECT profile was chosen due to the corresponding authorization rule. Check the appropriate rule political authorization results. First cause Selected authorization profile contains ACCESS_REJECT attribute
.../...
Only 3 user groups are observed:
Other attributes
ConfigVersionId 5 Port of the device 1645 DestinationPort 1812 RadiusPacketType AccessRequest Username host/xxxxxxxxxxxx Protocol RADIUS NAS-IP-Address 172.25.2.80 NAS-Port 51517 Framed-MTU 1400 State 37CPMSessionID = b0140a6f0000C2E15374CC7F; 32SessionID = RADIUS/189518899/49890; Cisco-nas-port 51517 IsEndpointInRejectMode fake AcsSessionID RADIUS/189518899/49890 DetailedInfo Successful authentication SelectedAuthenticationIdentityStores CDs DomaineAD XXXXXXXXXXX AuthorizationPolicyMatchedRule By default CPMSessionID b0140a6f0000C2E15374CC7F EndPointMACAddress 00-xxxxxxxxxxxx ISEPolicySetName By default AllowedProtocolMatchedRule CDM-PC-PEAP IdentitySelectionMatchedRule By default HostIdentityGroup Endpoint identity groups: profile: workstation Model name Cisco Location Location #All locations #Site - CDM Type of device Device Type #All type #Cisco - terminals IdentityAccessRestricted fake AD ExternalGroups XX/users/computers in the domain AD ExternalGroups XX/users/certsvc_dcom_access AD ExternalGroups XX/builtin/access dcom certificate service Called-Station-ID 54:75:D0:DC:5 B: 7 C CiscoAVPair SSID = CAMPUS If you have an idea, thank you very much,
Kind regards
Eventually, the AD he loses connectivity with ISE
-
ASA LDAP is not find memberOf Active Directory domain users group
It seems that any group I have add an account for the ldap memberOf thinks it is except for the domain users group. Is there a specific exclusion of this group somewhere? It does not seem to be a problem with space in name, because if I test it with other default groups like domain administrators, it works. I get the same result of the ldap attribute card as long as you try to use the domain users group in a DAP policy. Debugging ldap 255 returns every other group membership for an account with the exception of users in the domain.
When I run the command "sh filter LDAP ad 'Domain' group ' is the domain users group in the list of results, so he is able to see it and it exists."
Please see the attached link under primaryGroupID, which states that the Domain Users group is not part of the memberOf attribute. http://msdn.microsoft.com/en-us/library/ms677943.aspx That explains why the mapping fails for any Domain Users as seen in the debugs
-
Export user group security settings
Hello
Does anyone know of an orderly way to export / retrieves the user group security settings configured? Would really help if we could see some of our user groups with a comparison side by side through export.
Greg
Hello
Lol there is no way to export the settings of user group.
You can download user, user to download you can check the history of product, checking for registered users, but there is no way to export the users group.
Maybe you are looking for
-
HI so I recently did a restore from my old iPhone to a new 5s 5s. on this operation, I had to install all my apps again as usual, I did this on the wifi and then had to leave my place and obviously they can not download correctly. Once all applicatio
-
ENVY 17 t-j100 update Select Edition CTO of Touchsmart screen?
Is it possible to upgrade the ENVY 17 t-j100 Select Edition CTO to a Touchsmart screen and if so, any idea what it would cost?
-
Disabling individual helmet catch
Recently I started having a problem where the headphone jack on the front of my PC will cut to. I thought "no problem, I can use one at the back of the computer" However when making cuts in and out it interfere with the sound of my other ports as wel
-
Hello Can use us Cisco Spectrum Expert to conduct studies of site? If this is not the best tool, suggestions are more than welcome. Basically, what I am after is the signal strength and SNR values. Thank you Andrée
-
Hello This is the last problem I have to solve. I would be very happy if you could help me with this one too So-1 is the scenario I have, but in this scenario, I should have an ASA before the end point and make a VPN tunnel betwenn the two networks s