MAC 5.1.5 server has additional sides to users/groups. (bug?)

Similar Questions

• ???  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "an error occurred when attempting to change modules.  It will not import pictures and has no side panels under the library.  What should I do?

  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "an error occurred when attempting to change modules.  It will not import pictures and has no side panels under the library.  What should I do?

  Error changing modules | Lightroom

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Windows Server R2 2012 domain server has problem of tombstone

  8614 directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifecycle.

  I have a primary domain server and five additional domain controller (all servers running windows server 2012 R2), each in the other location. In that four of them works fine. but a single additional DC because of the headstone, because of server has long downtime (more than one year). I also try to demote the domain controller, but unable to it. So is there a solution

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Mail 0x900CCC0F error code: "your server has unexpectedly ended the connection." Help!

  Hello

  I am running Windows Mail on Microsoft Windows Vista Home Premium SP2 on a PC HP for ~ 5 years. Our ISP is SBC (AT & T - Uverse) in California, 12 MB/ch wired high-speed Internet. Until recently, electronic mail has been working well. Then, we started to have problems with the speed of send/receive. When you perform one of these tasks, 100% of the time, the green in the status bar goes about to halfway and then stops completely. It takes a few minutes to complete the task (after that Windows Mail is responding again). About 75% of the time, the connection times out. This happened about a year. I had an AT & T technician examine the settings and questions several times and they all said that there is a problem with Windows Mail. The latest technology told me to turn off my antivirus, but then I HAD a virus, so I had to turn it back on. Anyway, I'm currently running Microsoft Security Essentials on your computer, and I read in a forum earlier that he didn't have a problem in this case. This was really inconvinient for us and I came close to switching Mailhosts. It is convinient for me to watch on my cell phone, it's the computer these days. So many random error messages and low speeds - Ugh!

  And then, the e-mail completely stopped working today! Every time you try to send/receive, it appears: "your server has ended suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. "Account: 'Windows Mail', server: 'inbound.att.net', Protocol: POP3, Port: 995, secure (SSL): Yes, error number: 0x800CCC0F. This has been reviewed several times and AT & T said that there is a problem with Windows Mail. I can't send or receive e-mail, and it is completely ridiculous! Soon will contribute an expert please! (Otherwise, we change to another host)

  Sincerely,

  BMich21

  February 2, 2012 16-30-45 PST *.

  Delete the account. Near WinMail and reboot. Add the account back.

  https://www.att.com/eSupport/article.jsp?SID=KB401570&CT=9000818&title=what+are+my+email+server+settings+%28i.e.%2c+pop+and+SMTP%29%3F#fBid=sCYuB1RY78P

• The connection to the server has failed.

  I can no longer send e-mail messages:

  The connection to the server has failed.

  Object "more Pizza.
  Server: 'outbound.att.net '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 25
  Secure (SSL): Yes
  Socket error: 10060

  Former title: George E

  Reconfigure the settings for your account.
   
  Port 995 with SSL checked for inbound.att.net. Port 465 with SSL checked for outbound.att.net.
  http://www.att.com/eSupport/article.jsp?SID=33462&CV=820
   
   
   

• Windows Live Mail - the connection to the server has failed.

  I use Windows Live Mail to read my email.  Today it stopped working with the following error:

  Can't send or receive messages for the Yahoo! Mail account. The connection to the server has failed.

  Server: 'pop.sbcglobal.yahoo.com '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: POP3
  Port: 110
  Secure (SSL): No.
  Socket error: 10061

  It has worked very well.  Nothing has been changed or reconfigured by me even if I noticed that an update of Windows ran last night.

  Any suggestions to fix this?  I'll be happy to publish any necessary additional info.  Any help would be appreciated.

  Try these new account settings.
   
  Required changes continues using AT & T / SBC e-mail out
  http://www.technology-USA.NET/downloads/SBC%20Global%20pp%20Setup.PDF
   
   

• Using a Mac as a media server

  I would use a Mac Mini as the entrance to multimedia server of my sound system.

  I need to make the Mac Mini iTunes DLNA server that can connect to the device that acquires different sources and distributes the sound for different areas of households and their wired speakers.

  Did someone familiar with the different DLNA servers available?

  I ripped my CD collection in MP3s a while back so I could listen to them on mobile devices, especially in the car.  But I would be re-rip them in WAV or AIFF to produce quality music CD to the home entertainment system.  So I would like to ensure that the DLNA server is not only reliable, but high enough quality that I wouldn't have problems streaming music in real time and without abandonment or loss.

  I'd be happy to expertise and recommendations in this area.

  Thank you.

  Some DLNA aka software. UPnP software includes the ability to "transcode" files video or audio from one format to another. So if you have a mix of DLNA clients that does support all the same format, it can convert the files for those in need. You can take this into consideration when choosing a package DNLA for your Mac.

  Before I get to DLNA, I would say that the DNLA is old, poorly supported, behaved badly and I advise you if possible to avoid. There are other approaches that you can choose from are better for you but if not, then go to the answers below DNLA.

  First of all, the other non-DNLA approach. To do the audio multi-room, the Prime Minister is to buy a Sonos system. With this you buy either pregnant Sonos e.g. Play: 3 or you buy a Sonos Connect which allows you to connect an existing amplifier. Sonos supports all audio formats supported by iTunes, including Apple Lossless, that will be the best format to use if possible. While Sonos is the market leader there are other brands offer similar solutions. Other systems similar to Sonos examples of Logitech Squeezebox, Roku SoundBridge (interrupted), an Apple TV3 or TV4, etc.. All these support Apple Lossless and all different rooms playing different titles at the same time.

  A second approach is to use the standard Apple's AirPlay, many AV receivers now support AirPlay if you have a network interface on your AV receiver which these days is standard or an option on most. iTunes would then broadcast directly to the AV receiver using the standard of airtime.

  A third similar approach is to get one or more AirPort Express WiFi-base stations, they have an audio connector, you AirPlay from iTunes to the AirPort Express and it outputs via its audio connector of the connected audio equipment that could be pregnant or audio/video receiver.

  Now there is a limitation with AirPlay, only iTunes can only produce airplay the same content to one or more destinations AirPlay, if you want to play several different songs at the same time, so that's where the Sonos and similar solutions win. The iTunes can however be a Mac, or Windows, or an iPhone or an iPad.

  Go to the DLNA. You'll probably find many DNLA for Mac servers are abandoned or semi abandoned in that they have not had a recent update and so may have problems with versions of Mac OS X or only work with certain customers or do not transcode well or at all. In other words like DLNA as a whole, it is rather a mess. You will find that you have to buy a package commercial DNLA although it will always be cheaper that buying a Sonos multi-room installation. I advise to test trial versions, be sure to remove each before trying the next.

  With no particular feeling, take a look at the following.

  http://www.cyaneous.com/products/FireStream/

  http://www.universalmediaserver.com/

  http://www.isedora.com/

  http://Twonky.com/

  http://serviio.org/

  http://www.tvmobili.com/

  http://www.Tonido.com/app_mediaserver_home.html

• Alert - an error occurred sending a message - mail server has sent a wrong message: 5.7.1 < unknown - what it means?

  When using Mozilla Thunderbird - when I try to send emails, the following will occur;

  "ALERT".

  Error sending mail. The mail server has sent a wrong message: 5.7.1 < unknown [14.137.73.189] > client host rejected: access denied.

  Why I was able to send emails to specific email addresses - but now, for some reason that I don't understand - I can't.

  How can I solve this problem?

  What is your SMTP server?
  What is the part of your e-mail address or your email provider?
  What is your ISP?

• The OCSP server has no status for the certificate

  From just today, whenever I try to access www.fanfiction.net, I get this error message from FF: -.

  "Secure connection failed".
  An error occurred during a connection at www.fanfiction.net. The OCSP server has no status for the certificate. (Error code: sec_error_ocsp_unknown_cert) "

  I already tried removing the Cert8.db and Secmod.db and uncheck only the two OCSP parameters d ' option in advance. Neither work. The site is accessible to any other browser so it's really Firefox question.

  Need advice on how to fix this ASAP.

  the issue seems to have been fixed by the site already, you can go ahead and give security.ssl.enable_ocsp_stapling to true.

• X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

  X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

  Hello
  Basically, Yes to your question.

  For more details;

  IMM2 Web GUI access via browser and see environmental specifications tab in the server properties menu.
  There are two types of threshold, "Higher criticism" and "upper Fatal".

  If goes on "Higher criticism", then a soft stop will be initiated, where the next depends on your operating system of his behavior causing shutdown graceful or not progressive.
  If more higher jumps "Upper Fatal", then a hard stop will be engaged, which is not a normal shutdown of the typical operating system perspective.

  Kind regards

• HEX 0x8BBB0011 as the connection to the server has been disconnected

  Hello

  I use a shared variable of the network to control a loop in FPGA in cRIO 9073. 1 for a month, the program was runing without any problem, but suddenly, the VI is thrwoing an error

  "HEX 0x8BBB0011 connection to the server has been disconnected.

  The error or warning occureed while writing the following shared variable

  \\NW-cRio\NW Library\NW_Force_cal

  \\169.254.106.130\NW Library\NW_Force_cal ".

  A screenshot of VI is fixed, the NW_Force_cal is highlighted.

  After the VI has been shut down and restart the VI took over running without problems. This kind of unpredictable behavior is very difficult to manage, I lost data in real time during 12 hours of recording because of this problem.

  Please suggest a solution for this problem.

  Thank you

  Guilhem

  The error has explained the issue.  The network had problems that led to the server being offline.  How to solve this problem is to understand what is meant by "real time".  It's just another way to describe a deterministic calculation.  In other words, the program ensures that everything will happen within a predetermined period.  Order things to be deterministic, they must be controllable.  The most obvious way to break the determinism is to prompt the user for entry.  As we cannot guarantee clearly not the user will respond within a given period, can no longer call the deterministic program.  In this case, we have a more subtle break of determinism.  Relying only on a network will break determinism.  It is not simply a way to ensure that the network is not getting hit harder than usual.  In this case, the network was down for a period of time long enough to raise an error.

  Here's where we get to fix things.  Once the error has been generated, the code to do with it?  The wire of the error is not used for anything else.  I expect to raise an error and stop the program.  Clearly this isn't the desired behavior.  So, why we do not use the wire for an error handling?  In case of error, you can connect the data locally.  When you cover the network, you can clear the log to the host PC that you usually use to collect your data.  This command removes the dependency of your network for the code works.  With the help of a more robust code solves the problem with the relatively easy error management.  Unfortunately, there is absolutely nothing anyone here can do to ensure your network never loses connectivity.

• The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller.

  Hi all

  Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...

  Thank you & best regards
  Andy

  Hi Andy,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information.

• The dhcp server has not seen a directory for authorization server

  I recently upgraded from Server 2003 to windows server 2008 r2. After the upgrade, the DHCP server has started to not giving IP address after a lease has expired. For DHCP to provide IP addresses, I have to restart the server. I need help on how to configure my server to allow the service to restart. Any help will be much appreciated

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Server internal error - read the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I get the following error message when you try to access one of my hotmail accounts:

  Internal Server Error - read the server has encountered an internal error or misconfiguration and was unable to respond to your request. Reference #3.269102cc.1330033628.4ef0aa7f.

  What is this error and how to fix it?

  Thanks Ellie

  I get the same message... must be a problem with hotmail.