Mysterious solution

Similar Questions

• Mystery needs Solution! Drive hard dv6258se

  Hello

  I recently got an error #1-07 on my test diagnostic message and decided to replace my hardrive.  I checked the specs for my box and ordered a SSD drive suitable to replace the original disc.  Or at least I thought it was the original drive.  The form of State that my box comes with a SATA I drive, but the bios and Device Manager claim that the drive is SCSI.  My box has been recalled twice to correct the defects/factory model, pourrait HP replaced the SATA drive with SCSI drive during this time?  I check the model number two disks to check what they are, but that did not really help since the original Toshiba MK1234GSX both the new 830 SSD from Samsung come in SATA and SCSI.  I checked the Samsung is SATA, but cannot confirm the Toshiba.

   

  I could format and restore the SSD from the restore disks, but restarting failed and the bios did not find the hard drive.  Subsequent attempts to restart grew up a NVIDIA, read error.  When I put the disc Toshiba back in it starts but is still VERY slow.  Click, wait 10 minutes, click, wait...

   

  Everything I read on the State of the boards that the default value of the bios is SATA, but retoring bios factory settings has not solved the problem.

   

  What is going on?  Please help and advise.

   

  Thank you.

   

  PS being new I accidentlally posted in the wrong place: you will find a more detailed description in the Desktop section, where I posted recently submitted: hp dv6258se drive hard toshiba appearing as SCSI but spec says SATA

   

  Yes, him talking about HP guy to me and I even found many other complaints about the disks SATA is read as a SCSI, it was a common occurrence from 06-08 and then had no performance impact that is a possible reason why the SSD is not compatible in theory it should be.

  .. .He explained that because player plugs directly into the motherboard and the chipset software is only formatted to read things a specific way that it will NEVER be read a SATA as a SATA, which might be why the dv6000 are not able to recognize any SSD.  I.E. HP dv6000 is capricious and has a few quirks, if SSD does not occur.

  So I'm going to buy a traditional HD, a cert HP technician think I should be able to go as high as a 500 GB HD, but I really just to get my box of operation, so I agree with a 120 GB.

  Thanks for your help solved mystery.

• iPhone storage mystery! (Lack of 42 GB of storage space!)

  OK the Forums of Discussion... it is a mystery.

  My father has been to complain his iPhone 64 GB 6 by saying that he did not have enough storage. I thought it would be a simple solution like the removal of unused applications, turning on iCloud photo library and the optimization of the photo, but what I discovered has totally confused me.

  My father's phone shows that it used 55.2 GB in settings > general > storage & use iCloud > manage storage. Yet when I add everything in the storage management screen it is only 13.2 GB, a difference of 42 GB.

  I decided to do the same exercise with my phone. It is said that I used 28.1 GB and when I add the items in stock to manage, I get 23.2 GB which is a much more reasonable difference of only 4.9 GB.

  So where is the lack of 42 GB?

  Any help would be great. Thank you!

  When I go to settings > general > storage & use iCloud I see two options "managing storage. One is local storage 'my device' and the other is iCloud.

  Do you see the two options (1), (2) your device?

• Portege Z30 - problems of USB - error Code 10 using the disk external HARD - SOLUTION

  Hello

  I wanted to just connect a problem and the solution I just got/found. It's about a Z30 with an installation of Windows 7 32 bit and a 1 TB mSATA SSD.

  I was unable to get any USB 2.0 drive Flash or any (if USB or USB 3.0) external HARD drive to work. They would try to install but I'd end up with a yellow warning triangle in Device Manager.

  After various attempts of a workaround - I spotted alongside the driver.sys and usb.sys load - there was a mysterious driver which I finally tracked down the wizard of related software.

  After uninstalling the magician - all USB keys and external HARD drive worked perfectly.

  Do not have this problem with an other Toshiba with a standard SSD EVO and magician - so not quite sure that the installation is triggered it.

  However problem now * solved.*

  Thanks for sharing!

• How can I get hpzidr12.dll? HP SOLUTIONS DOES NOT WORK

  I have a c7280 all in one printer and just installed win 7 32 bit ultimate on windows vista ultimate. HP solutions asked me on an upgrade to get the printer etc drivers and software updated for win 7. I downloaded the complete installation as directed by HP and the installation version, the computer just sits there in the part of installing software and then comes up with the next Dot - 4 Wrapper message repair. This file does not exist and is required for installation. then it gives me the necessary dll. who is C:\windows\system32\hpzidr12.dll manufacturer HP version 0.0.0.0. Where can I get this DLL file? I can't support for HP because my printer is under warranty and of course all the HP wants is your money if you have a problem and certainly no worries to try to help their clients regarding this problem. I installed their patches, and they do not work. Now, my printer is not fax or copy. It is connected wireless and I did HP diagnostics and wireless printer software and device software and several patches there including the dog patch, and the patch scan. always uninstall and reinstall the software reveals the same problem and when you make the wireless Assistant and Assistant Diagnostics my printer is recognized and pass all the tests. also the wizard test to the PRINTER and fax work just fine, and I can send and receive faxes and copy and scanning, fine print. When on my computer, however, the tests work as leader, however, when I go to HP solutions program gives me an error (yellow triangle with exclamation point) and States printer is not connected. Yet, I can print and scan from the software, but I cannot fax or copy an error message appears and States may not connect to the printer. MY Device Manager and IP address and printer Wi - Fi testing and diagnostic diagnostic all work well and find my computer and also do report no problem Firewall etc. I guess the program of upgrading hp had me use to get win 7 working with HP software solutions has a defect. I uninstalled the upgrade HP Software Download Center gave me and tried to install my original software I got with my printer when I bought it and it signals it is impossible to install the software under win 7. Yet once, I try to install the software version download full reports HP will modernize my HP solutions to work in win 7 and again once I get don't find it the above dll file and that it is necessary to make the installation work. So where can I get the correct version of the HPZIDR12. DLL VERSION 0.0.0.0. ?????

  I guess it's the library file of dynamic links that I need to get my HP software solutions to work in win 7. I have had some discussions with HP technical support and had 5 different technicians try to help me rounded up to 20 hours multiple msconfig takdowns etc etc and I have a program that does not work. What is a registry problem? I ALSO HAD A PROGRAM WHICH IS SUPPOSED TO CHECK AND FIX REGISTRY, FILES AND IT DOES NOT SOLVE THE PROBLEM.

  Please HELP ME AND maybe A COMPUTER GURU CAN GIVE ME SOME INFO ON HOW to SOLVE THE MYSTERY OF THE HP solutions SOFTWARE DILEMMA?

  SINCERELY,

  OWS

  Hey everybody. ID suggest trying the following steps to see if it solves the problem:

  Solution: re - register the MSIexec service

  1. In the Windows taskbar, click the Windows icon ( ), type run in the text box search programs and files and then click run in the top of the dialog box. The run window opens.

• Is there another SOLUTION FOR READING FILES .flv in addition to PLAYER in time REAL?

  Recently, I upgraded from Real Player cloud both Real Player on two desktop computers. A computer kept thousands of thumbnails of the video while the other did not. I confirm in this forum and has received several possible solutions, which did not work. Also, I confirm with Real Player and received several, almost identical solutions also failed to solve the mystery. Real Player always has a constant search for the answer. I have to pronounce on the HP computer with the missing thumbnails by doing a system recovery to factory specifications. Returned all the missing thumbnails and all is well except for one, and it's that I don't have reinstall Real Player/Real times. Windows Media Player plays the majority of the thousands of videos, but there are still hundreds that are unplayable without Real Player/Real times. My question is, ' is there a safe format to install other than Real Player/Real times to read .flv files without jeopardizing other files? Also, is there a reason why Microsoft Gets a built in-house audio/video download system rather than having to resort to a third party outside? Thank you.

  Yes > VLC will easily play flash files.

• Windows Photo Viewer shows the files blank JPEG thumbnails (inside folders) poster white icon, already tried a lot of Solutions - please help! S.O.S.

  Dear all,

  I have this problem:

  

  All JPEG files are normal, I tried to open with the help of Adobe Photoshop CS5. But if I use it to watch my files, it takes too long to load.

  This is the case if I try to open them using the Windows Photo Viewer:

  

  It's when I try to open it with Adobe Photoshop CS5:

  

  So the file is fine, they are non-empty JPEG.

  The difficulties I've tried before posting on the forum:

  - Fix it with Microsoft to photo viewer

  Fix It for animals works well and could not find any problem though, so nothing is fixed.

  - Removal 'External event AMD' Service

  Nothing change

  - Removal of color for the monitor profiles

  Nothing to change also

  - Updated all the drivers and windows

  Nothing change

  - Boot in Safe Mode

  The thumbnails are displayed correctly and "Windows Photo Viewer" display my images perfectly well BUT...

  - Start in Normal Mode with all the Services of persons with disabilities (except Microsoft)

  The problem happens again, that the thumbnails are blank and the images also.

  - Cleaning disc (with checked "thumbnails")

  The problem still exists

  

  - Set programs "Default" for the Windows Photo Viewer

  The problem still exists

  - Run SFC/scannow From The Command Line

  The problem still exists, and the SFC somehow told me that my Windows is fine

  

  - Removal of hidden miniature manual

  The problem still exists

  - Windows Live Essentials installation and use the 'Photo Gallery'

  Photo Gallery crashes all the time after asking if I want to associate files "JXR" or not, but I'm not on this topic, but this does not solve the problem.

  I tried every step, I have found on various types of forum, but not the last magic: Reinstall Windows, I really want to solve this problem without cleaning Windows installation if possible, and I'm so in love with "Windows Photo Viewer" because it's simple, fast, and it is very precious to me. I tried free viewer and FastStone Image Viewer but is a bit complicated, controls are small and it always comes out in full screen, I need this so baaad.

  My computer is:

  A10-7800 Kaveri AMD processor

  RAM 8GB Corsair Vengeance DDR3 black

  Western Digital 1 TB Caviar Black hard drive

  Motherboard ASRock FM2A88X +.

  Power supply Corsair VS550

  OS: Windows 7 64-bit

  Thanks in advance :) I really want this wrong, please...

  Dear Ramesh,

  I thank very you much for your time to help me, after tumbling around with other solutions, windows finished in "the RPC server is blahblah" thing a bit, then I reinstalled everything from the ground up and the problem disappeared... I don't know what happened to the previous window, I am now using the same drivers, same software, except perhaps the earlier had too many junks (I think this is the classic problem with windows, after sometimes he collected too and begins to act dumb)

  It seems that the problem came, neither windows nor the drivers... But too bad it should remain as an "Unsolved Mystery": P

  Anyway thanks, see again you and Merry Christmas and happy new year to you

• Complete package sotware not install Center solutions but only base drivers

  I just bought a Photosmart 7520 printer all-in-one.

  PS7520_1315.exe is the software that I downloaded and installed, but it provides only the basic driver and not the HP Solution Center I used to have for my old printer. I tried to find out what I didn't wrong had no idea. It should provide the whole package, but it does not work. The print function is OK when it is used from the dashboard printers but I prefer to use the software. CAB anyone help?

  Thanks for all your efforts Dragon fur

  The problem has been resolved by the local HP support center.

  It had to do with compatibility issues.

  I'm under Win 8.1 improved to win 8, Windows 7 upgrade. This seems to be a recipe for trouble in this area, although it should not be.

  When the helpdesk began their exe remote file on their site that it worked and in a mysterious way 8.1 Win on my office agreed and gave up the resistance against the execution of this application.

  Thought it might be useful to you, just in case...

  Once again thank you for everything and a lot of success!

• My computer 'mysteriously' randomly stalls every few minutes

  It is a fact. There are some 'ghosts' that nobody seems to know how to fight in Windows. Engineer, in 40 years, and as such, I've seen a few. My computer 'mysteriously' stops randomly every few minutes. Meters show the RAM and CPU have more than enough resources, when the stalls occur. Temperature OK. Does anyone how "ghostbust" (in practice, directly to the solution, no speculation, please) my computer? Thank you, Julian, julianort, gmail.

  [Original title: stall]

  You can open Event Viewer and review the events and see if there is no event suspicious or something related to this issue. When this happens open Task Manager and into resources. You can also look in the resource monitor and see what is happening in your system.

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• HP solution center and alignment page

  Hello

  I tried to learn how to fix my printer in your video

  http://WWW8.HP.com/h20621/video-gallery/us/en/customer-care/printers-and-all-in-ones/print-a-DIAGNOS...

  The problem I have is that the printer prints all this trouble, and return to me the message "place the alignment on scanner page and press OK.

  But the video was told to open a mysterious "HP Solution Center" which tells me that it won't open because I don't have a HP device!

  How absurd...

  Now I have two problems, no Solution Center or alignment Page... actually three, because I have a HP printer that doesn't work too

  Cant believe it!

  Please provide a screenshot of your control panel. Anything in red, you need to delete off your computer:

  Once this operation is finished, continue to follow this HP document always above.

  

  Your Solution Center shows that you don't have a connected device, then Yes, you have to go through all that in order to print an alignment sheet. You have two question right now I'm provides steps to set. You cannot print an alignment sheet immediately your printer, you need to use the Solution Center.

• What is the best DR solution when the Dr. is in a different city 1000 kms far above a 20 MB link?

  Our current DR is not appropriate if we want to use our server room in another city. I am concerned about the impact of the distance between the cities and the limited link would have on any DR solution.

  I was thinking about fault tolerance, but I am concerned about the traffic. I have the same problem with Vmotion if necessary at an event of DR.

  SRM is an option, but would be costly because of the nrequirement of another license of VC.

  Does anyone have any suggestions?

  I don't see how you intend to do without some type of shared replicated storage.

  You can't assume that your main site will meet with ONLY a loss to the host where the storage subsystem mysteriously remains online.

  You will spend a LOT of money with infrastructure reliable and robust enough to maintain replicas of mirror of your storage between locations or you'll have to decide an acceptable delta value that may exist between your primary and DR sites and (for a lack of a better term) 'ship' your images on a regular basis between different sites.

  As someone else said management must decide the return on investment for this project and determine acceptable risk here.

• All my messages on my iPhone were mysteriously deleted after I restarted - is it possible to sync my old backup iPhone with my iMessages on my Mac?

  Hello!

  This past weekend, I noticed that my Messages app acted strangely on my iPhone 6. Accordingly, I turned and turn it on again and noticed that all of my posts have disappeared. I then did a hard reset and turned on - still no messages.

  I have my settings to keep my messages forever, what really saddened me to see all of my messages disappeared. In any case, I'm about to restore my backup iPhone on a new phone (6 s). Luckily, I backed up my phone the week last before my messages disappearing.

  I understand that when I restore a backup, everything that happened on my phone since will not appear. However, I have also the Messages on my MacBook Air app, when kept all my messages before and after the mysterious disappearance on my phone. Once I have perform this restore, I was wondering if it is possible to synchronize in any post-restore on my laptop to my phone messages.

  Thank you!

  Hi masizh,

  Congratulations on your new iPhone 6 s! I understand that you want to synchronize the restoration of post messages on your Mac Messages app to your iPhone 6 s. If these are the iMessages, your new device needs to load the entire conversation once you send or receive an iMessage from the recipient. SMS messages may not work in the same way, however, you can contact your operator for support with text messages.

  To continue to have your Mac with your iPhone SMS sync, don't forget to implement continuity with your new device.
  

  If you have an iPhone, the SMS that you send and receive on your iPhone may appear on your Mac, iPad, and iPod touch as well. You can then continue the conversation from any device is closer to you.

  Set up SMS and MMS messaging

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

  

  Please use the Apple Support communities to post your question. Enjoy your new iPhone!

• Any solution yet?

  Why is there a solution to this? My mac is so hot because of these applications. Yes, I had reformatthis.

  

• Solution to stop and bufferin game of Air streaming on Apple TV 3rd gen. ?

  Even when im in the same room of 12 feet out. It's really frustrating.

  Streaming tube you 3rd generation is very frustrating on Air play on Apple TV. I have a Mac Book Pro with Mac OS El Capitan.

  any help will be appreciated.  Im trying using Roku, it might work better.

  Hi wilmernyc,

  I see your post that your antenna streaming is lagging and becomes interrupted when trying to stream content from your MacBook Pro to your Apple TV. I want to help you get a solution for this!

  Please follow the steps listed here to solve this problem:
  

  If your content is interrupted or your network is lagging

  If you have a weak Wi - Fi signal or interference from a device nearby, like a microwave or baby monitor, follow these steps:

  1. Make sure that you use the recommended settings of your Wi-Fi router.
  2. Move or disable other devices that may cause interference.
  3. If possible, connect your Apple TV directly to your router with an Ethernet cable instead of using Wi - Fi.

  Your AirPlay connection may if interrupt prematurely when you lock your device, put it to sleep, or switch to a different application.

  Get help with AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch - Apple Support

  Although the article does not directly apply to OS X, I think that these steps will be useful for you.

  Take care!