Similar Questions

• Speed broadband slows down when it is plugged to laptop power.

  I have a Presario CQ60-320SA running Vista.

  When I have my power supply plugged my speed broadband via wifi injects hydro-huileuses:

  Download 139 Kbps(17.375 KB/s)

  Download 287 Kbps/s(35.875 KBytes/s)

  Unplugged:

  Download 11461 Kbps (1432.625 KB/sec)
  Download 345 Kbps (43.125 KB/s)

  What would do this and how to fix it?

  Hey Drewid56,

  I'm sorry to hear that you run on this question with your WiFi. What is a consistent question? It happens without fail immediately whenever you plug the power cord?

  I would first look at the advanced power options.

  Start button > Type 'power' > click Power Options > settings click Change Plan the next selected > click on change advanced power settings > expand card wireless and power saving Mode settings.

  Make sure that trendy: is maximum Performance. If changes have been made, click apply and then click OK. Test on battery and plugged in again. I would like to know what the results are.

  I hope this helps! Please let me know if you have any questions, and what are the results

• Drops randomly in internet speeds on wifi devices

  Hello

  I got an Airport Extreme of 2nd generation (currently with firmware version 7.6.7) for many years before I upgraded to the newer model (6th generation - currently with the firmware 7.7.7) a few months ago. The old model, always worked, so I put up as a range extender. This facility has functioned well until recently I have began to experience drops in the download speeds of 5 to 30 Mbps on my iPhone and the Macbook Air, when should I achieve speeds of 90 Mbps. sometimes drops just connection completely as well. I can do speeds back to normal, if I have the device temporarily forget the network, and then I join it. I do not get these drops in connection on my Mac Mini, which is connected to the 6th generation Airport Extreme by ethernet. Is there anything I can do in the Airport utility to remedy this situation, or y at - it another utility application I should download to diagnose the problem (I found an app that could help called Wifi Explorer -https://itunes.apple.com/us/app/wifi-explorer/id494803304?mt=12) or is the most likely problem with the hardware?

  Thank you

  Matthew

  We need to know if the extreme old is configured as a roaming network... IE using extreme new ethernet or it is configured as a wireless extension.

  The original AE and the second... check the basis of EI... both are the A1143... is only single 2.4 ghz band or 5 GHz... they are NOT simultaneous dual-band.

  What installation speed can be extremely (sic) low... The old AE is really too old to be useful when combined with the newest one... you could just ask questions.

  If you need to extend wireless, then in Airport utility, hover your mouse over where it says unknown.

  This will give you the connection of the connection speed... I expect here very poor speeds and the actual file transfer speed will be a 1/3-1/4 of this link speed.

  Some details that I just put in another post.

  Re: TimeCapsule & GUI conflict internet connection not wifi. Why?

• Airport slower speed on iOS devices

  I recently had an upgrade from my ISP to our slavish ADSL ADSL service, which bands together several modems to increase the speed.  Before the change, I received about 11 Mbps, and is compatible on all devices - iMac, iMac with airport Time Capsule ethernet connection with wifi AP Time Capsule, iPhone and iPad with wifi AP Time Capsule.  It's solid as a rock.

  Since the change, I get 25 Mbps on my iMac, you use direct connection to ethernet or wifi, but only 18 Mbps on my iPhone and iPad.  When the technician who came to put up, the only changes we made to the time Capsule AP was to put it in bridge mode and connect using DHCP instead of PPPoe.  Any ideas what may have caused the change and what I might be able to do about it?

  Thanks, Dan

  You can't really wait the iPhone or iPad to a Mac address as speeds rise above 20 Mbps and in. After all, the iPhone and the iPad use a very small, much more simple antenna that is only able to receive a stream, while the antenna on the Mac can handle much more.

  A connection of 100 Mbps Internet here, Macs arrive at or near this speed if they are in the same room as the router. The iPhone and iPad are lucky to hit 40 - 45 Mbit/s on a good day even when they are much closer to the router than the Mac. On average, they are about 35 Mbps or more.

  Nature of the beast with iOS devices, I'm afraid. Your iPhone / iPad are doing well. Be happy.

• Control PXI via PyVisa devices?

  Is it possible to control PXI peripheral via PyVisa in the same way as USB and GPIB devices?

  Hi k-rhyme.

  It should be possible to do so. You can definitely control devices with NI-VISA PXI and PyVISA is simply a Python wrapper, it should be possible. It also depends on the version of VISA that is using PyVISA. I recommend you look at the manual of user NI-VISA for more information PXI of specific functions.

  With the help of the Assistant of the Driver NI-VISA and NI-VISA to develop a PXI (e) /PCI (e) driver in Windows

  http://www.NI.com/Tutorial/4713/en/

  NI-VISA user manual

  http://www.NI.com/PDF/manuals/370423a.PDF

• RefNum of control in a custom device

  I currently develop a device custom Veristand 2011 with Labview 2011.

  It is an Inline model.

  During initialization (and only in the initialization stage), I'm trying to list recursively all the controls within a Cluster (which represents a data structure).

  This does not work when you try to deploy the veristand project. I get the error code 1055:

  Error 1055 occurred at a location not identified
  Possible reasons:

  LabVIEW: Object Reference is not valid.

  I tried this simple example, and I can't get the name of the control, or any other prperty.

  I tried the same code in a project of labview RT and that works perfectly.

  Is there something I missed?

  I don't think that code RT when it is run in an exe built as NI VeriStand has a façade. Therefore code like this one will not work. If you build your test vi in an EXE RT you get the same problem?

  Why you have this code? Maybe we can find an alternative

• Can't control RS232 and GPIB devices simultaneously with labview.

  Hi all

  I have a thermostat that has a RS232 to my computer connection and a counter from the source which has a GPIB to my computer USB connection.

  I have screws that allow me to control each device separately. But when I did a VI to fight them together that I can communicate with the GPIB device, but not with the RS232 device. I think that the VISA GPIB and RS232 VISA having a problem to determine this.

  Do you know what I could try to fix this?

  Thanks for your help.

  
  

• my sound keep disappearing. When I go to the volume control, it says no device installed. I have been through all the steps. How can I get my sound back?

  my sound keeps disappearing.  I go through all the help and support the steps but still no sound.  the volume control is all grey and says no audio device found.  but the Device Manager indicates that all is well.  What is the problem that I continue to have?

  Hello

  1. the troubleshooting steps are you referring?
  2. don't you make changes on the computer before this problem?

  The following article might be useful.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• TouchSmart 610-1130 uk: Broadcom WLAN adapter limit speed broadband

  Broadband providers having changed my download promised 150 Gbps speed could be achieved. The tech' staff of the firmware again connected to my computer and carried out tests of speed and he said that incoming speeds were correct, and that my Wireless Network Connection; WIFI Broadcom adapter is binding for higher speeds. I watched the Broadcom adapter link and he showed at speeds varying between 55mpbs at peak times, to 120 Mbps at other times. My provider said I need a minimum of1gpbs to achieve this.

  Someone know if an update of this kind is possible to get more speed, or am I stuck with what I have.

  I have a HPTouchsmart 610-1100 uk, which works on Windows 7. Any advice would be appreciated.

  Beamerbaz5, something is not here. Your internet service provider lied to you about speed or you misunderstood the speed promised to you. First off let me explain that 150gbps (gigabit per second) is equal to 18.75GBps (gigabytes per second) and you're probably more used to see things in bytes, example an mp3 song can be 3-6MBs (megabytes) and a dvd contains about 4.7GBs. Internet providers and for us to say our Internet speeds in pieces rather than in bytes to confuse us on how fast our speeds are really. If you receive truly 18.75GBps speeds you would be able to download DVDs 4-5 size films in one second, which is unfortunately IMPOSSIBLE, unless your running some supercomputer of type of cutting-edge research that you would need this kind of power and speed to save 18GBs value of data per second. (A typical hard drive can record data about 100 Mbit/s and the new strong States can do around 300-500MBps, but definitely not 18GBps or 18, 000MBps)

  I pay about $ 80 per month for Verizon Fios and get 75mbps (9.37MBps) of the speeds, which is one of their flabby superiors of service without spending hundreds a month on internet only. Wireless network connections can fluctuate depending on the location and other factors, which is why you noticed 55mbps and 120mbps, but both should be thin enough. I wonder what your internet provider because there are VERY few companies that offer speeds of even 1 Gbit/s, but NONE I know offer 150gbps. It is possible that you get 150mbps which would be 18.75MBps in this case, Yes, your wireless Internet connection is not enough and you need to use an ethernet network cable to get the speeds promised by your network provider. So yes I call your internet provider and ask them to clarify how fast your actually paying for.

  I hope that helped!

• Inspiron 1525 not able to select the internal microphone for the webcam, or it appears on the Control Panel, sound, Audio devices

  Initial problem was Dell Webcam video recording record any sound.

  In the Panel configuration, Device Manager, sound video and game controllers, there are two high definition Audio devices listed: location 1 (internal Bus High Definition Audio) - I take it that it is the internal mic. and location 2 (Audio High Definition Bus Interior) - I take it that it is the external microphone jack. Both have the same version of the driver.

  Control Panel, sound, the recordings tab showed 2 devices that looked like identical except the bars that show green with volume were only on the first, which is also the default and would detect sound if you're real close to the webcam microphone when you talk. The two devices displayed as 'work '.

  Accessories, Sound Recorder records are silent any distance you get to internal webcam mic.

  Dell WebCam Audio Source tab has two selections, the two reading Microphone (3 - high definition Audio Device). Both selections recorded the sound with the EXTERNAL microphone jack. There is no way to select the internal microphone webcam, it is not an option.

  According to the instructions found on the web, I uninstalled the first device only in the Device Manager and rebooted. The same version of the same driver has been installed. But now the parameters have changed. Device Mgr shows Loc 1 and 2 pass. However, under the Øresund, tab records there are always 2 features, but the first said "currently unavailable", is always the default and the sound bars that go for green for the audio tests are ANOTHER unit now instead of the first. If you check the properties of each device, they BOTH show the same location 2 (inside Bus High Definition Audio), i.e. the external microphone jack.  Loc 1 device (built in mic) does not appear!

  Accessories Sound Recorder works with the EXTERNAL microphone. (How does he know that one to use, it is not giving me a choice?)

  If the tracking device 1 (internal microphone) does not appear anywhere besides than Device Manager. I want to use the internal microphone for Skype and webcam. Somehow, I need to get the Loc 1 unit appears on the sound - recording tab and in the Source Audio Webcam list? What should I do?

  Thanks in advance for your help.

  Jimco

  Go to the Inspiron 1525 support page

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-1525/drivers

• bottleneck of apparent control "sounds and audio device properties | audio tab | sound

  Lately, this becomes a little more than one gene, to the point where it seems there are already some solution out there : I often want to spend (internet radio or mp3s) music that I send now based Creative Media USB "broadcasting" (home use - audio send anywhere where I could want him in my house)-for a random downloaded video programming.  Video noise must never be sent to the speakers of my monitor-entertainment (although I wouldn't mind if that sound signal should also go through the creative system to other points in the House.)  But it's scary, sometimes I have to play music, to turn on the monitor and sauté with the music of great volume until I can mute or mute the volume.  But it is never necessary for my music be routed to the monitor.

  I drive the monitor via a HDMI cable and adapters changed just after the last of them went wrong, so the new audio software NVIDIA can get complicated this unduly now.  But it seems that the only way for me to join the audio track from any video source given the monitor is to go through the tedious process to navigate to the audio tab and then change the default devices of the Creative device to the NVIDIA device.  If I have already started the video until I realize that I am still set up for music, I have to leave the VCR and the restart before it will route the audio through the HDMI.

  Then of course if I want to stop watching the video source and go back to something with music as a background, I must reverse this procedure as a whole.

  More complicated still is the panic that can ensue when I receive a Skype call - it can be quite EXPLOSION on the monitor speakers.  These levels seem to chronically inadequate because I assume that they share the same slider control as something else (it's still too low volume without be turned up to 11) and are not put to level automatically, or something like that...

  Certainly I'm not the only one annoyed by these audio problems.  What are the solutions are there for these problems?  I would like to be able to choose speakers, based on sources: mp3s and other audio-only stuff would be default to the Creative device, while avi and other video stuff would be only of course exit by default for the NVIDIA card.  Seems kind of obvious... but it does not work like that?

  Hi 808pants,

  You can try to change the settings for the audio mixer Panel to help relieve this problem:

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  In addition, most programs can be configured to use a specific audio adapter. In the case of Skype, you can check the following link to set up Skype:

  http://www.Skype.com/help/guides/soundsetup_vista.HTML#4

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Unless the program is designed to specify the audio adapter, the only way that you can choose where will the audio is by setting the audio adapter by default.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HID of USB 2.0 high speed, broadband, end points supported for windows 7?

  I have a .net Application which reads the data from the USB from a HID device continuously in User Mode. The HID device using a size of 1024 bytes report and is configured to 3 Transactions by microdot. Also, the interval is configured correctly.

  Ideally, the USB should be able to receive data @ rate 24 MB/s. But my application cannot receive data @ 8 Mbps rate.

  So I wanted to ask if it's a question related windows or the drivers for the HID devices high bandwidth high speed, or can it be overcome using kernel-mode drivers. Or if there is anything else I may be missing

  (On USB 3.0 hub unit communicates successfully with the PC @ 24 MB/s. "So I don't think it's a device related issue).

  Thanks in advance to all who try to help :)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• How to control the implementation of devices that cannot run any agent, such as thin clients, printers, and other press.

  I have an OOB layout that has all the ports from the switch controlled by the same profile. I would like to be able to place clients on a network, printers on one another and tell on another unix systems. Right now I have a filter that lets the clients on the network, and they are put on the vlan by default to access via port profile. The filter is by MAC address.

  What is the only way we can do that?

  Can we put things on different networks, using this method, if so how?

  Any help would be appreciated.

  Hello

  When you create a new filter for a specific MAC/IP, we should select the "Access Type" for this device.

  As shown in the attached screenshot (taken from the NAC 4.8), we also have the ability to define the type of access based on a specific user role.

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Disabled in Control Panel audio playback device, now I can't get it back for him!

  In my control panel > hardware and audio, I tried to Exchange my lack of reading, and to do that I hit "disable." he removed the device in the list so I can't select it to re - activate. It is always installed and can be found in my device manager, but I can't enable / define a default manager. How to get back the unit in question in my control panel? Thank you!

  Hello

  · What is the number and the model of the computer?

  You can run the troubleshooter from the link and check if it helps. Diagnose and automatically repair audio playback problems: http://support.microsoft.com/mats/no_sound

• D750 takes 2 sec to fire when there are 2 lights remote control speed

  Tried the new D750 in situation with 2 remote flashes (nikon) device by the device itself. Shutter speed shows 200, but the camera takes about 2 seconds to take the image? Why, what's the problem

  It's the Adobe Camera Raw, not a Nikon forum hardware forum, so not a suitable place for your question.

  Maybe you accidentally put the custom setting: exposure delay Mode (d4 on the D800), unless you mean a 2 second exposure.