TouchSmart 610-1130 uk: Broadcom WLAN adapter limit speed broadband

Broadband providers having changed my download promised 150 Gbps speed could be achieved. The tech' staff of the firmware again connected to my computer and carried out tests of speed and he said that incoming speeds were correct, and that my Wireless Network Connection; WIFI Broadcom adapter is binding for higher speeds. I watched the Broadcom adapter link and he showed at speeds varying between 55mpbs at peak times, to 120 Mbps at other times. My provider said I need a minimum of1gpbs to achieve this.

Someone know if an update of this kind is possible to get more speed, or am I stuck with what I have.

I have a HPTouchsmart 610-1100 uk, which works on Windows 7. Any advice would be appreciated.

Beamerbaz5, something is not here. Your internet service provider lied to you about speed or you misunderstood the speed promised to you. First off let me explain that 150gbps (gigabit per second) is equal to 18.75GBps (gigabytes per second) and you're probably more used to see things in bytes, example an mp3 song can be 3-6MBs (megabytes) and a dvd contains about 4.7GBs. Internet providers and for us to say our Internet speeds in pieces rather than in bytes to confuse us on how fast our speeds are really. If you receive truly 18.75GBps speeds you would be able to download DVDs 4-5 size films in one second, which is unfortunately IMPOSSIBLE, unless your running some supercomputer of type of cutting-edge research that you would need this kind of power and speed to save 18GBs value of data per second. (A typical hard drive can record data about 100 Mbit/s and the new strong States can do around 300-500MBps, but definitely not 18GBps or 18, 000MBps)

I pay about $ 80 per month for Verizon Fios and get 75mbps (9.37MBps) of the speeds, which is one of their flabby superiors of service without spending hundreds a month on internet only. Wireless network connections can fluctuate depending on the location and other factors, which is why you noticed 55mbps and 120mbps, but both should be thin enough. I wonder what your internet provider because there are VERY few companies that offer speeds of even 1 Gbit/s, but NONE I know offer 150gbps. It is possible that you get 150mbps which would be 18.75MBps in this case, Yes, your wireless Internet connection is not enough and you need to use an ethernet network cable to get the speeds promised by your network provider. So yes I call your internet provider and ask them to clarify how fast your actually paying for.

I hope that helped!

Tags: HP Desktops

Similar Questions

  • TouchSmart 610 1130 i5 23 "Can someone please let me have further details on what this office has?

    Hello

    This is my first post. I am interested in buying a Touchsmart 610 1130 i5 23 "Can someone please let me have further details on what this office has as the details on the specifications do not tell me anything. I would like to know things like: if it has built-in webcam, speaker, HMDI? the usb ports how etc. etc.etc.

    Concerning

    sjbis11

    Hello sjbis11,

    Is the TouchSmart 610 you are looking at a model 1130uk. If so, here is a link to a plug detailed for this model.

    http://support.HP.com/us-en/document/c02883538

  • How do you send netflix through my touchsmart 610-1280qd to my TV

    I can't understand how to stream netflix to my TV on my Touchsmart 610-1280qd.  I have no problem streaming from my Envy laptop but it is very hot (even with an external fan) and noise requires speakers.  I had a second monitor attached to the 610-1280qd, but he said to duplicate postings.  It does not work.  Disconnected secondary monitor completely - that didn't work.  I also had a failure of installing Chromecast on the 610. Is it possible to stream with a touch screen to a TV?

    Hooray, solved.  I had already set up a second monitor (using the hp video referenced in several responses) with a StarTech USB to DVI video adapter for the second monitor 2310 m older HP.  When I went to pick him up for the 'video USB connector"referenced elsewhere in the forum, I came across a dollar 20.00 adapter DVI to HDMI by GE (Walmart).

    By connecting this piece to the USB adapter to DVI video, it worked for access to television.  I have to unplug the adaptor DVI monitor cable and replace it with the DVI-HDMI adapter and HDMI cable (less than a minute), which allows me to watch netflix on my TV movies.  I will say that I would not have thought it with the forum, the news of cat info and visually see the possibility that the small DVI to HDMI adapter would work. Good luck to those who always try to watch television through their touchscreen.

    It seems to me that when there are 1100 more we try to see how to do this that HP would create a specific page or a video for us help to know how to "connect your touch screen to your TV.  I spent 3-4 hours trying to find information to solve a problem that shouldn't exist in the first instance. I don't understand why there is no video output on touch screens.

  • Pavilion p7-1222: cannot connect to internet using stock card Broadcom WLAN

    I have a p7-1222, which has been recently updated to Win10 64 bit. Since the upgrade, I've known little or no connectivity using 46.0.1 Firefox or Internet Explorer v 11.0.31 so you use ipconfig, I can ping my router and receive a very quick response. I have the Broadcom WLAN stock adapt with an era of 2010 driver who seems to be the current driver when I do an update. Is there a more Win10 driver for this card? Do I need a newer adapter which is compatible with Win10? What can I do to connect to the internet with a certain type of regularity? Thanks for your suggestions!

    Hello:

    If your PC has network Broadcom 4313 wireless adapter, I believe that this does not work so well (if at all) with W10.

    The only suggestion I can offer would be to see if the W8.1 driver provides an improvement.

    This package contains the Broadcom wireless LAN drivers that are required to activate the integrated Broadcom Wireless LAN Adapter into laptop computers supported running a supported operating system.

    6.30.223.267 Rev.A (September 17, 2015)

    FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72931.exe

    If this does not work, the best thing to do would be to get an external usb wireless network card.

    I use it on my 3 HP of the PC business office.  Works very well on the W10.

    http://www.Amazon.com/Linksys-dual-band-Wireless-N-adapter-AE3000/DP/B007ZLGXA8

  • TouchSmart 610-1280qd crashes

    TouchSmart 610-1280qd; Windows 7 Pro; PC x 64; Intel Core i7-2600cpu@340GHz; connected to the second monitor (HP2711x) via a video adapter - Startech.com (provided by HP):

    Crashes (buzz then blue screen) when I play movies, videos.

    All solutions?

    Hi Casiebert,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Touchsmart 610-1280qd and get a buzz then a blue screen on your HP 2711 x 27-inch diagonal LED display. What happens if you unplug the external monitor and run the same video or a movie?

    Please let me know.

    Thank you.

  • TouchSmart 610-1130jp: TouchSmart does not (white screen)

    My TouchSmart 610 will be 8fois beeps after I pressed the power button. And it doesn't show anything, as in the black screen.

    But the power is still and the fan is functunally normal.and all other materials are also functionally normal.

    I tried to remove the graphics card, but its still the same beeps (8fois together with the ledlight). And also I tried to

    change the CPU at a new you always change anything, the same problem. When I check the FRIEND bios beep codes, the

    8beeps, this means that the video memory. I don't know what video memory, it is indicated (if grphics card or the)

    main video memory) if it meant the main video memory, how can I change the video memory if she tied with

    the motherboard? What will I do with this problem? Can you please if someone has encountered this problem

    shared for me to know how to solve?

    Hello David Edward,.

    Your system originally came with Windows 7?

    Have you tried reseating the RAM stick? Sometimes, that's all it takes.

    I got a stick go bad causing a system to have the exact symptoms you describe.

    The system will use the built-in memory RAM. If the RAM is bad, it can cause the effect of black screen.

    You can also run a diagnostic memory via the bios here test...

    HP Notebook PC - detection of hardware failures (Windows 7, Vista)

    You can also run a memtest from a USB or DVD.

    MemTest86 - Official Site of the x 86 memory test tool

    Ideal would be to have another stick of ram to replace with to test.

  • HP TouchSmart 610 BIOS, all elements are gray and inaccessible?

    Hello

    HP TouchSmart 610-1010sc

    BIOS HP version 6.09 (FRIEND BIOS 2.6 x)

    I am able to get into the BIOS with F10, but every time he asks: ' "user CURRENT password:".

    When I type the password (empty) computer gives 2 long beeps and it enters BIOS.

    But the PROBLEM is that all the elements are disabled...

    Which means that all the items are grayed. If I look at the instructions of the BIOS (HP bios for motherboard F01 settings) there are many editable parameters (BLUE) as boot disks, lan onboar elements, load default configuration etc.

    But in my computer, everything is visible, but GRAY and inaccessible. I can't access or modify anything even not "Load setup defaults". Only active items are "Exit ignorant changes" and "Exit save changes."

    What's not here?

    How can I access BIOS so that I can change the settings normally?

    Finally the BIOS and boot LOGO obtained works!

    I noticed that, after CMOS, reset all the product data in the SYSTEM IDs inside the HP BIOS section me wiped out.

    So I had to enter my BIOS by CTRL + F10 instead of normal F10, so that the ID SYSTEM fields are editable.

    Then just re-typed all the information of two stickers found the back of the computer.

    First content SERIES only and PART SKU No.. Second was BUILD ID, BYTES and NAME OF THE PRODUCT FUNCTIONALITY.

    NOTICE! Note that you can type BYTES of FUNCTIONALITY that once, when recording it will be grayed out out/no editable.

    After saving these changes to the BIOS and restart the computer, the LOGO is the settings the computer BIOS and fully accessible back once more

  • Satellite C650 and WXP - cannot install the driver for WLAN adapter

    Hello

    I have recently 'come down' Win 7 to Win XP on my laptop because the software I use works best from XP. It's a pain because of the SATA drive, I needed to streamline a facility etc... but now, I'm happy to announce that I am in place and running under XP with one small exception...

    I can't get my wireless adapter to install.

    The LAN adapter ' Atheros AR8152 PCI-e... ' is installed and running

    Plug-and-play find a "network controller", but it cannot install it and leave her with the formidable yellow '?'

    I have visited the support site, entered my details laptop and downloaded the appropriate drivers, but they don't seem to want to settle. File self extract and then never run the Setup, as Toshiba only I downloaded self-extracting exe files, I have no file inf etc. try manually.

    Any suggestions welcome because I ran officially ideas

    What Satellite C650 do you have exactly? I can see on the Toshiba download page there are 4 different models. One you have?
    Check it please sticker post name of exact model so that we can check the specification s notebook and see what WLAN adapter is inside and the bottom.

  • HP TouchSmart 610-1190f: replace the TV Tuner card AVerMedia HP TouchSmart 610 with SSD PCI-E

    I do not use the TV Tuner card for my HP TouchSmart 610.

    Can I replace the card with a PCI-E SSD?

    Hi @hpts610user,

    These all-in-one computers are not designed to be changed. I'll try not because of space and design.

    Here is a document of things which can be updated LEVEL AND SERVICE of GUIDE. .

    Perhaps looking to put a hard drive hybrid to replace the old hard drive.

    I hope this helps. Please keep me informed of the progress of things.

    Please let me know if that solves the problem by marking this post as "accept as a Solution. To simply say thank you, click the Thumbs up below!

    Thank you.

  • Tecra S1 - WLAN adapter and which WLAN driver

    Hello

    I use a recently purchased pre-owned Tecra S1 (model PT831E with Intel Pentium M 1, 5 GHz).
    I am unable to know which WLAN adapter is built in this book. No wireless network adapter appears in the Device Manager pane. I downloaded all the Tecrta S1 WIFI drivers from the Toshiba Download Center. I tried to install, but none worked.
    Can someone tell me how to identify the right WLAN adapter and which driver to use with it?

    Thanks in advance

    e trader_2002

    Hello

    I found the news following the wireless cards are compatible with your laptop model:

    LAN card wireless (802 11b Agere) PA3189U-3MPC
    PA3266U-1MPC (Intel 802 11 b) wireless LAN card
    PA3236U-1MPC (Atheros 802 11 a & b) wireless LAN card
    PA3267U-1MPC (Intel 802 11 a & b) wireless LAN card

    I don't know which you have, but all drivers should be available on http://aps2.toshiba-tro.de/wlan/

    Good luck!

  • Satellite L300 PSLB8A - cannot locate the WLan adapter after downgrading from Vista to XP

    Model - L300 Satellite PSLB8A-01F004
    Australian model
    Place of residence current UK

    Happy new year to you all. I have a problem with the adapter wireless following a downgrade from Vista to XP Pro home. Device Manager indicates that a network adapter, which is the LAN and it does not work properly.

    I have two points with one exception - Ethernet controller and Modem on Bus High Definition Audio device.

    I find all the major engines of the Toshiba Australia but he lists three (I think) site possible WLAN - Atheros, RealTek, and one of the other manufacturers.

    I tried all three without success but am willing to acknowledge that I can have a mistake, perhaps by installing all three drivers at the same time for example.

    The indicator on the front of the box portable wireless lights on or off with the hard switch setting.

    I am also unable to locate the display of all available wireless netrworks, this can be a symptom of the driver is not installed.

    I tried to locate the wireless card, but it doesn't seem to be accessible through the background panels, including the Panel of RAM module.

    Any ideas please?

    > I have two Articles with one exception - Ethernet controller and Modem on Bus High Definition Audio device.

    The Ethernet controller is the WLAN adapter.
    I guess that the WLan driver is missing and so the wireless network card does not appear under network adapters

    Please check this Toshiba How TO:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

    This will help you find the right WLan driver for this chip.
    and here you can find the drivers:
    http://APS2.toshiba-tro.de/WLAN/

    good luck and good news 2011 ;)

  • Satellite A210-14 - strange problem with new WLAN adapter Intel 4965agn mm1

    The initially installed atheros wireless network adapter is just b/g and too slow for my network/needs

    So I bought a one n-project: mm1 4965agn (intel) (he got a toshiba p/n and s/n too)

    I replaced the atheros one and plugged the Intel - booted and installed the drivers - restart-> adaper works very well-> reboot - nb stops at the toshiba BIOS screen without loading all the windows. I can't even to the BIOS-> removed Intel wlan adapt nb boots and as usual.

    Please let me know what I need to do to make things work

    Hi chubbyhamster,

    To me, it sounds like this map isn't WLAN compatible with your laptop. I guess that all wireless network adapters are compatible with all laptops (assignment of pins e. g.).

    As far as I know use fast N project you need 3 antennas. I think Satellite A210-14 has just two antennas because only WIFI b/g card built in. This means that you can upgrade your laptop to the project speed N t.

    Alternative you can use the LAN card or a USB key which takes in charge the project N, but in my view, WIFI b/g standard should be fast enough

  • Satellite L515-S4960: ESata port can be used for LinkSys WLan adapter?

    Buy Toshiba L515-S4960 laptop, bought a LinkSys RangePlus wireless notebook adapter, but I did not yet find a port to plug in.

    I wanted to extend the reach of the signal from my router.

    The place above the eSata port opens to support an adapter?

    I don't want to tear anything in amont.*

    No, you cannot use the eSATA port for the use of the USB WLan adapter.
    You can only connect compatible external devices that support eSATA port!

    As far as I know a laptop to LinkSys RangePlus wireless adapter is a PC card that supports a CardBUS interface.
    You can use in only in the PC card slot supports CardBUS as well.

    Check you manual use if your computer supports the PC card CardBUS (32 bit) slot.

  • HP recovery Partition lost "Hp Touchsmart 610-1100fr"

    I lost partition ecovery can I do to restore it?

    I tried to reinstall my computer with HP recovery to file factory, but an error is 1% and the recovery partition is lost so I want back what can I do now, I would if I could get it back with the help

    When I bought my HP touchsmart 610-1100fr so I did a back up of the recovery with 'Nero Backitup' partition

    but whenever I have to restore the partition, that seems not function all I get is a black screen, then he told me BOOTMNGR is missing and the F11 key no longer works

    * PS: I live in Tunisia and I can't order the recovery DVD

    Hello

    If you place your order of recovery disks is not possible, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version originally supplied with your PC - IE probably Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • Z580 - WLAN adapter problem

    I've got Lenovo IdeaPad Z580, with Core i7, 4 GB of RAM and 1 TB of HARD drive processor.

    A few months ago, I noticed that my BONES sometimes would freeze (make this beep sound freakin ') if I moved my computer too fast in my office (weird). She got worse a few weeks ago and seems to be somehow connected to my wireless network adapter.

    It especially simply - nothing works. Switch WLAN disappears from the BIOS configuration, etc., like it wasn't even there. If I'm lucky (as I am now), it would work somehow. All of a sudden appears again in the BIOS etc. I can even use it on my Windows 8, but... If I propose a little my laptop, it will suddenly freeze and restart causes WLAN adapter not in the system at all, or the connection is de-energized ("metered" stuff etc.). Restart adapter according to the results of system in "find no WLANs", wlan switch endangered or gel.

    I tried to reinsert the WLAN card, it sorta fixed stuff when I did it for the first time, I had a week or two without a problem, but he returned and reintegrated support is no longer.

    First question what I can do with this adapter WLAN problem?

    Second question is - while doing all this thing reinserting, my screws are a little bare now (but not completely, it is possible to get them unscrewed without any problem) because I have not noticed my screwdriver is broken and ruining. My laptop is still covered by the warranty? I do not have removed or broken any warranty seals in the process well, just the screws.

    I forgot to mention, by WLAN adapt is Atheros AR9485WB-EG.

    Information on repair mentions setting parts disconnected.

Maybe you are looking for

  • Can I install Vista Home Premium with my product key?

    I have Toshiba Satellite A300-146, model No.: PSAJ0E, 1 GB RAM, Intel Dual core 1.87 processor, chipset Mobile Intel (r) 965 family with * vista home premium *... But it's in the recovery disk... If I install it, my hard drive will be formatted and b

  • 60 X will not boot from USB

    My X 60 a double boot Windows XP and Linux Mint 15. I need high grade at 17 Linux Mint. (and debris at the time wanted the Win XP partition as I no longer user there) But when I try to boot from a CD or a USB drive the .iso image file does not launch

  • Default qualifier to "generate the function tree.

    Hello Since this is my first attempt to use the CVI feature for the creation of a Commission of an include file as I am facing a very basic question... My problem is that in the popup 'Generate the function Tree', I need to specify a default qualifie

  • importing a dxf to the outline layer Board of Ultiboard

    I try to import an outline of the map of another CAD file, but I have several problems.  First of all, with the layer "Outline of the map" selected, if I import the .dxf file it place in white color, while this layer must be yellow.   How to convince

  • Update of configuration problem.

    I have Vista Home installed on my laptop. The last automatic update apparently got stuck in the final (3rd) part of the process of setting up... that it sets up, shuts down, then immediately after reboot loops right returns to step 3 in the update co