Question about fan with Equium A60

Similar Questions

• What DVD players are compatible with Equium A60 PSA67E?

  my question; What dvd players are compatible for an equium a60 (psa67e-001001en)?

  background; I did a very stupid thing! while I was at the Japan and about 18 months after buying my a60 in the United Kingdom, the packaged dvd player. I replaced it with a teac dvd player and it worked like a dream! I threw the old disk (I think it was a matsu * has, but can't remember the exact model). in any case, I came home and had a little time on my hands, so I decided to set my machine and corrupted the windows xp registry.

  Now, windows xp runs in the loop, I can't access and I need to wipe the hard drive and start again essentially. I put the recovery disk in, but the computer doesn't read him and desperately wants his wacky way to windows. I believe that it is not recognizing the teac drive that I used to replace the old. I think that if I put an original return type, the firmware can recognize the drive and I'll be back in business... or so I hope!

  of course, all the other tips would be welcome too! Thank you.

  work around? PS a work around, I thought so... copy the contents of the diskette of recovery on a hard drive (using my old computer) can change the current hard drive in my a60 with it... theory; When the computer detects the content during the start-up, it will install xp on another part of this drive and I have a working machine once again. could - this something like this work? any thoughts?

  Post edited by: markchev66

  Hello

  Did you look in the manual of the user who is usually preinstalled on your laptop?
  There you should find information.

  I found these:
  Toshiba SD-C2612
  Toshiba SD-R6332
  Matsu * a UJ-811BTJA-A
  Matsu * a UJDA760
  Pioneer DVR-K13TBA
  Toshiba SD-R2512
  TEAC DW-224TH

  It is only a part of the list mentioned in the manual. Check it!

• Question about partitions on Equium A100-027

  Hi all!

  I'm new to the forum but have been hidden for a while and he thought at the time that I said "Hello".

  This and the fact that I have a question about my laptop Satellite A100-027.
  The hard drive on my laptop seems to be divided into three partitions = Vista (c) / data (E :) / WinRE (d) with the WinRE (D :) is quite small but others, quite large.))

  My C drive is up to 3 that GB free with about 35 GB of free data (E :) is possible to merge these two to give me a big drive? And if so, how?
  Please excuse my ignorance, but it seems impossible to me to "get my head around" this thing hard drive and would split the a large hard drive.

  Any help would be greatly appreciated and once again, Hello to all.

  Hello

  As the user previous already said, you can manage HARD drive partitions in disk management settings.

  If you n t want to have a data partition (e) then you can try to delete it in disk management.
  Then you can add this empty space of the HARD drive for other partitions on the HARD drive.

  But note; the empty space will be placed at the end of the HARD drive. I don't know if your C partition is placed as a second HARD drive partition, but if so, then it should be no problem to add empty space to partition C (System) of m.

  Concerning

• I can't get my new scanner to work with Equium A60

  I can't get my new scanner (canoscan lide 70) to work with my a60. Is it because the usb ports are all hubs?

  Hello

  > it because the USB ports are all hubs
  Sorry, but this suggestion to me confused.

  I m also owner of a scanner and it s a simplest thing to connect and install it!

  I put t see any problems using the scanner.
  All devices should be delivered with the own installation CD and I guess that your scanner also comes with additional supports.
  This CD contains the description of the installation and the necessary drivers.

• Question about Threads with WHILE and FOR

  Hi all
  
  I have a question on threads with a loop on this topic sentece.
  
  Have the following class:

  class test{
  
  bool foundThing;
  PararellSearch(string [] lista, string s2find){
  while(!foundThing)
  {
  for(int i=0;i<lista.length;i++){
  if(s2find==lista){
  
  foundThing = true;
  
  break;
  
  }
  
  }
  
  }
  
  }
  If I start 10 threads which are using the PararellSearch method to look into lista, each of them inits into a different point, and when some of them found the right word then set foundThing= true. It will stop WHILE and FOR loop in all the threads? 
  If not, how could I do it?
  
  Thanks a lot for your help.
  David.
  
  Edited by: user13553506 on 27-dic-2010 12:15
  
  Edited by: user13553506 on 27-dic-2010 15:54                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  			 
  When you post the code, you'll want to post a [url http://sscce.org] NBS so that it is clear that what you try to do it. For example:
  1. in the validation of code, put {code} before and after him, then he will be readable.
  2. the convention in Java must start with a capital letter class names, so test, could not test.
  3. the convention in Java is to start with lowercase letters, so parallelSearch, not PWhateverMisspellingYouHaveThere method names.
  4. There is no such thing as bool. It is a Boolean.
  5. it is a String, not string.
  6. never use == to compare the States of objects (such as the content of the strings). Use equals().
  To answer your question: If you create Test 10 objects, then, given that foundThing is an instance variable, there will be 10 variables entirely independent foundThing. An adjustment will not affect the other. In this case, the easiest thing to do would be to foundThing static, so that there is only one copy which is shared by the Test class as a whole. This isn't the only way, or even the best way in all cases, but you have enough other problems to face, so for now to keep things simple.
  Finally, when you have a variable that is shared by multiple threads, you need to either make all the access to this variable synchronized on the same lock (reads and writes), or you need to declare the volatile variable.
  		   

• Number of different questions with Equium A60

  reinstalled windows and is not install these audio and video controller controller, pci modem went sm bus controller, I have a toshiba EA60-155 someone can tell me what that what material is/where can I get the drivers of

  was soon paul

  Hello

  Why you didn t use the recovery CD?
  It's the easiest way to install the OS and it should works property because this CD has been very often in the trial.
  In my opinion, try to recover the operating system with the recovery cd.

  Good bye

• "27049 internal error" when you use recovery with Equium A60-692 utility

  TOSHIBA SATELLITE A60 - 692

  I'm trying to fix a friends laptop. The laptop computer wouldnâ? t start, would go to the blue screen just before the came WinXP loading screen then will re-start. I used a USB 2.5 HDD enclosure "to copy important files on my laptop and then formatted the drive of my laptop. I put the HARD drive in the Toshiba and have used the CD of restoration via an advanced option. on exactly 9mins 50sec time on the recovery process, an error message appears (27049 internal error). After that, it goes to a screen of style BACK with a little more information. Essentially by specifying that the error is "cannot read FILE_BITMAP MFT entry.

  I cleaned the CD
  I swapped the CD drive with my laptop
  Quick formatting it formatted, it is full
  Used the basic option where it does itself and it ERRORS with - not enough space on the partition - there is no partition! or if there's empty sound

  What can I do?

  Hello

  I think that the HARD drive is broken, because if you receive an error message with words like "MFT" (meaning MasterFileTable) then you can expect that the HDD has serious problems.
  OK, easy to talk to it s fast without knowing the machine and so on, but I know a similar error and I can give you the advice to probe hard disk errors.
  You can do this with the help of the "ultimate boot cd" which is a very interesting tool when you need information about your computer or you want to just check if everything works well.
  Here´s the link to the downloadable CD image that should be on a CD:

  http://www.ultimatebootcd.com/

  Hope you can solve this problem...

  Welcome them

• 2 questions about V2V with Converter Standalone 4.3

  I have an s on esx 4.0 with some VM Windows production environment.  Esx 4.0 host are moving to a new location with scheduled within a few days.  To minimize the impact that I had planned to get up a VM host and V2V temp the VM, then when the original kit back in his new house them V2V.

  I just built a temp esxi 4.1 host and did a V2V test that went ok (ish). The main problem I encountered was that the static IP address is not used.  So my 1st question is: is it possible for a migrated VM keep its static ip address configuration?

  Secondly, will I encounter any issues V2V ing those VMS back to an old version of VMWare is i.e. esxi 4.1 = > esx 4.0?

  not upgarding vmware tools might work around this or it would be perhaps better to stand at another temp esx 4.0 Server?

  Thank you very much

  It works without any problem - there are no traps.

  If you are worried about it, clone a virtual machine and copy the files for the cloned VM, then run it on the new ESX as a test.

  You do not have a lot to focus on

• Satellite P100-429 - Question about fans and ACPIs etc.

  Hi all

  I have read a number of thread on this forum regarding the work (or not!) with the P100 series fans.
  I use Ubuntu Feisty (7.04) I've updated my DSDT with a custom compiled version and also uses the version 3.30 BIOS... I had to do in order to get the sound working on this laptop.

  However, I noticed that the fan on the left side of the laptop never turns under Linux. It turns on with XP.
  The fan at the back of the computer seems fine no lights when the CPU is running...

  What is the GPU fan?
  Nobody knows if this will be quickly resolved... I raised a few applications support with Toshiba in the hope that it will make a difference.

  Also doesn't someone at - it will suspend / hibernate works correctly (i.e. sound and networking works when he took over)...

  Thank you
  Rax

  This will not work, im have the same Toshiba model. The BIOS has a big problem and it's bugged.
  IM tested all combinations, no results.

• Portege M400: questions about fan and screen buttons

  Hello

  I just received a M400 and experience a great tablet, but I have two problems.

  Fan seems to be always, no matter how hot the cpu or the performance.

  buttons on the screen, specially the control stick, do not work after some time of use, a reboot usually solves it.

  I tried to reinstall the drivers as suggested on other forums, without success. It looks like a driver problem.

  Any ideas?

  Thanks in advance.
  LUIS

  Hello

  Hello guys. Fans are running because of the temperature inside the laptop.
  @Nicknick1: you are using the joystick. In this case, I guess you play. All series device with a maximum performance during the game. It s wasn't that asking the fans to run all the time.

  However: I put t know how much standby power version you have, but you will find on the page of the Toshiba driver the V7.08.00 changed to 17/03/06

  Concerning

  PS: Don't forget to check on the page installation instructions

• Question about area with a rug code * a DVD-RAM UJ - 841 S

  Hello!
  I have a Toshiba Satellite with a CARPET * a DVD-RAM UJ - 841S. Someone knows something about the firmware for this? I tried to use dvd43 and VideoLAN, but it does not work properly!

  I guess you do you want to Flash the firmware to remove the region code of the DVD player.
  Am I wrong?
  Don t do it! It risky s.
  If you update the drive with the wrong firmware or is not compatible the drive is not able to read/write to the media; CD and DVD.
  In addition, the use of the incorrect firmware will avoid the reorganization of the training by the BIOS.

• Question about WPA with lan card wireless in a Satellite Pro 6100

  Hello world

  I wish toshiba Australia had a cool site like this... It's fantastic.

  In any case, I just buy a kit (PA3189U-1MPC) wireless lan card for my laptop and network connection problems wireless of the University. The tech guy he says I need to have installed a wpa driver, and then I would be set for the use of bandwidth United.

  Anyone know where I can get a newish driver? I can't find anything anywhere...

  Thanks for any help,

  Jonno

  Hello

  First of all, it is very nice to read you like this forum. ;)

  So my friend from Australia, at first I must say that you use right and compatible WLAN card on your older laptop, but now I have to disappoint you. According to the specification, it is not possible to use WPA encryption with this card.

  Really, I don't think you can solve it with the new driver. I have newer computer Tecra laptop and I've tried everything but to no avail. Best solution for you is to use external USB WLAN stick. It will be much better for you. Initially, you can use WPA encryption and with the new card, you can use faster standard G and download speed will be much faster as with integrated WLAN card.

  Maybe you should think about it.

  Bye and good luck!

• Question about battery charger - Satellite A60

  I live in the United Kingdom and hope someone can help me here. I have a problem with my laptop Satellite A60 where it will no more work on the power adapter as the laptop power light does not illuminate and not fed, it. So I used the battery upward and he works on it but who reached now so I can't load up on the computer.

  So I would like to know if I can buy a charger for the battery to use just battery mode all the time. I say this because I had a guy look at the laptop and he said I had a small burned/broken component on the motherboard and was the reason why I can't get the socket and replace the Commission would cost 250/300 pounds is true or could I get a cheaper or the Board repaired.

  Does anyone in the UK/midlands know of anywhere? This is why I would like to know if I can get a battery charger for my computer...

  Hi mate,

  I'm sorry for you because of your situation. It's really not very nice when something happens.
  Unfortunately it isn't charger for your battery because they are charged in the machines.

  Then, you can do the following:
  Remove the hard drive (to save your data) and sell the machine on ebay. After that, buy a new one. :)

  or

  Bring your machine to repair and pay good money to make your machine working again.

  Hope I could help you ;)
  See you soon

• Question about ASA5510 with AIP10

  I installed ASA5510-AIP10 with on our customer site. But I have 2 problems.

  First of all, I don't see no giga0/1(backplane interface) AIP10 traffic.

  Can I configure ASA5510 configuration? I already configured configuration associated AIP10 group virtual sensor and interface of remote sensing. Unfortunately, I can not all traffic.

  When I entered 'show int gi0/1' 10 AIP, it displays a number of the traffic count is zero.

  Secondly, AIP10 cannot do update of signature on automatic ftp server. When I inspected the package through tool Ethereal, disconnected AIP10 Server ftp after ftp 'LIST' command session is submitted to the ftp server. Maybe, I think that AIP10 didn't present 'Get sig.pkg' after her present "LIST".

  What should I do? Is - this hardware problem of the AIP? I would like to know about the above.

  Kind regards

  Get monitored traffic requires two configuration on the ASA and the SSM.

  It seems that you have completed the configuration of DFS.

  Now you need the corresponding configuration of ASA.

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids11/cliguide/clissm.htm#wp1033926

  This is more easily by adding the lines of configuration "ips" in your policy map existing on the SAA itself.

  Once the ASA is configured, then the package counts on gig0/1 interface of the MSS should begin to increase.

  With regard to the problems of FTP server with automatic upgrade:

  The first thing to do is use the command 'upgrade' to the CLI to do a manual upgrade from the FTP server. This will ensure the name of user and password and directory settings are all correct for what you're trying.

  Once the manual works, then use the same settings for the automatic update.

  If the automatic update does not work, then check that this directory Unix style listing is used. The automatic update does not work when the style of the output of the Windows directory list is used. It is usually configurable on most Windows FTP servers.

  Also check out the "events to see the" while the sensor is to check the ftp server. The sensor will report on its findings. If he says that no updates have been found, check that you have a new update on the ftp server and ALSO make sure that the updated name is exactly as it appears on the ORC. Some users have inadvertently changed the name or the ftp client changed file names. The biggest problems we have seen is that capital letters are made lowercase.

• Question about images with Bootstrap galleries

  I watched the tutorial, I might add is very nice:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  And a number of questions:

  1. on the 'DEMO', there are 6 images. All images must be shown or may be just 1 image that when you click on the modal will load containing the remaining images?

  2. If you want to add more than 1 Gallery, do I need to recreate the full tutorial for each gallery? I have 5 different galleries.

  Thank you

  John

  jodmcc49 wrote:

  I watched the tutorial, I might add is very nice:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  Thank you to say, John.   I appreciate it.

  1. on the 'DEMO', there are 6 images. All images must be shown or may be just 1 image that when you click on the modal will load containing the remaining images?

  You can call the modal window to open a single image or a button, if that's what you want.

  jodmcc49 wrote:

  2. If you want to add more than 1 Gallery, do I need to recreate the full tutorial for each gallery? I have 5 different galleries.

  The way I structured this tutorial in particular, you should be 5 modal windows with a unique ID.

  • myModal1 - contains carousel1
  • myModal2 - contains carousel2
  • myModal3 - contains carousel3
  • etc...

  If you are good with AJAX/jQuery, you could call the Gallery carousel appropriate in a single Modal with GetElementByID instruction component.  But it's another tutorial.

  Nancy O.