Name of the PKI trustpoint client?

Similar Questions

• Errors of auditor of host name in the web service client

  We have a Web service consumer who runs in WebLogic, and we receive a host name error check whenever the consumer trying to communicate with the external Web service. The error occurs because the subject of the certificate is for a host name that is different from the URL that uses the consumer.
  
  A possible solution is to write a custom hostname Verifier, but we would prefer not to do so. Can mitigate this error if we import the external Web service certificate is added to the WebLogic truststore?
  
  Thank you

  NO, it can't be mitigated...

  Import the certificate into the trust store means that you trust the certificate, but if the CN of the certificate does not match the hostname... we must disable hostname checking / write a custom host name auditor...

• IP address redirected to the name of the server

  Hello
  Impossible to find something like this anywhere in these forums. I'm under edition of developer MX7 installed in the web server configuration, but I've configured CF to run on top of Apache later (this is on Mac OS 10.4). When requests are made on the server for cfm templates using an ip address, the server is somehow redirect browsers to the domain name (my-computer-name) .local (it's a default name used by Mac for LANs, my-computer-name is determined by your full name as only entered upon registration of your computer). I tried the setDomainCookies = "off" setting in my Application.cfm models and can clear the cookies on the browser, but I get the same result. I have to put the name of the server in the file httpd.conf of Apache 'localhost' or ' 127.0.0.1' to fix this or is there a fix I can implement in my code or in CF administrator?

  Thanks for the reply. Yes, it is a function of OS x and Apache, although the issue does not occur when you use CF. apparently when serving pages, that CF checks Apache for the ServerName set in the httpd.conf file attribute and if it is not defined explicitly, OSX check the name of the computer on the local network. My ServerName attribute has not been placed if I was getting the OSX name. The solution was simply to change httpd.conf and the value ServerName my ip address (although 127.0.0.1 or localhost assigning seems to work as well as CF does not push any name of the server to clients when set in this way, according to literature CF.) However, this may cause problems when not serving cfm pages, have not tested). Using setDomainCookies = 'off' in Application.cfm won't help since it is a function of the CF, not the app server. Good luck other Mac users!

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• -name of the server is not accessible you could are not allowed. I used windows server 2003 and windows xp as a client, the error is delivered in windows xp

  -name of the server is not accessible you could are not allowed. I've used windows server 2003 server and windows xp as a client, we use workgroup

  comed in the client error when we open the Working Group

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• using the group name and password group in client anyconnect

  Hello. Is it possible to use the group name/password of the legacy in customer cisco anyconnect vpn client? I checked the AnyConnect Administrator's Guide ' VPN XML Reference"and found nothing on this subject.

  It's true.

  AnyConnect Secure Mobility Client (VPN Module) can be used to connect to both types of VPN remote access:

  1. full SSL VPN tunnel

  2 IKEv2 VPN IPsec.

  The legacy VPN client is used only with the old IKEv1 IPsec VPN and you cannot use this type of VPN client AnyConnect.

• Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which t

  Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which the QR code pointing to. Is it possible to keep the current name of the page but create a page of automatic redirect named like the QR code? Basically, the brochures have all been printed already, so I need the QR code when analyzed in order to continue working. Now, it is not the case.

  Nevermind, I figured it. I've reproduced the page, renamed the QR that indicates the code of the page, and then he hid in the menu of page properties.

• How to get the name of the client computer and the name of the customer osuser

  Hello everyone,
  the trigger below works fine. But I want to get the name of the client computer and the name of osuser customer in the output of the same trigger shown below, how do I do this in the same trigger? any help is highly appreciated.
  Thank you and best regards.
  
  triggering factor:
  ------------
  CREATE TABLE logonaudit
  (
  user_id VARCHAR2 (30),
  sess_id NUMBER (10),
  LOGON_TIME DATE,
  host VARCHAR2 (20));
  
  Table created.
  
  CREATE OR REPLACE
  Logon_audit RELAXATION
  AFTER LOGON
  WE DATABASE
  DECLARE
  V_program varchar2 (120);
  BEGIN
  SELECT UPPER (program)
  IN v_program
  SESSION $ v
  WHERE audsid = sys_context ('USERENV', 'SESSIONID');
  If (upper (v_program) as 'TOAD %' or upper (v_program) like '% SQLPLUS %')
  then
  INSERT
  IN logonaudit
  VALUES)
  user,
  sys_context ('userenv', 'sessionid'),
  SYSDATE,
  sys_context ('userenv', 'host')
  );
  end if;
  END;
  
  the output showing sessionid, date, db user name, as a local server machine name.but I want osuser of customer names and the name of the client computer as you know connection of clients to the database of their machines.how can I achieve? any help much appreciated.
  
  Published by: 938946 on December 25, 2012 12:15 AM

  According to AskTom - do not use audsid, dangerous - can be 'zero '.

• Change the name of the client VM with PowerShell

  Hello

  I'm in a bit of trouble with a script PowerCLI so maybe some of you can help me because I just watched using PowerCLI. I work for a software company witch it assign tests, and I need to configure virtual machines in our data center. I managed to create a script for virtual machine cloning, but I need someone else to change the name of the guest OS (XP, 2008, 7) with the name of the virtual machine that appears in vCenter. I found a command "-OSCustomizationSpec", but it does not work for me ( http://communities.vmware.com/message/1562254 ).

  Thanks in advance

  Greetings, @adispy-

  Background, in case you didn't know: to use the parameter - OSCustomizationSpec to New-VM or Set-VM, you must have an OSCustomizationSpec (OSC) of some sort.  A couple of ways that you can create a CSOS: in vCenter via either the client vSphere (Home-> Manager Customization specifications), or in PowerShell via New-OSCustomizationSpec.  This cmdlet also lets you create a non-persistent OSC that exists only in your PowerShell session.

  Once you have a valid OSC, you can apply it to the new VM to deploy time (using New - VM either clone an existing virtual machine or to deploy from a model), or after the new virtual machine is deployed using Set-VM.

  adispy wrote:
  ... I found a command "-OSCustomizationSpec", but it does not work for me ( http://communities.vmware.com/message/1562254 )...

  How you try to use the parameter - OSCustomizationSpec (perhaps a sample of your code problem), and what error (s) are you?

• Getting the domain name of the computer Client using WebUtil

  Hi guys,.
  
  Is there a way I can find the domain name of the computer running the forms using webutil.
  
  I use WEBUTIL_CLIENTINFO. GET_HOST_NAME to get the client computer name. I also need the domain name.
  
  Thank you!
  Anand

  Try this:

  message(CLIENT_WIN_API_ENVIRONMENT.GET_ENVIRONMENT_STRING('USERDOMAIN'));
  

  I think that if no domain is defined, it returns the host name. In addition, this obviously won't work on Windows clients.

• Get the name of the client computer

  I would like to know if it is possible to get the name of the client computer in Flex and if

  possible how to do it.

  Kind regards

  I think I remember something similar to this a little backwards for SBI

  Here is the link

  http://forums.Adobe.com/thread/630962?TSTART=2

• E3000 change the network name of the client

  When I configured everything first the E3000 I called CiscoRouter device, and I got:

  (a) CiscoRouter

  (b) CiscoRouter-comments

  I then decided to change the name of the device for: Alberto-network and now I have:

  (a) Alberto Network

  (b) CiscoRouter-comments

  I have not foud a way to change the name of the connection of comments.

  Cisco COnnect allows me to change the password for the network comments, but not the name.

  How can I change the name of the connection of comments?

  Alberto smell, MD

  As dalime said, you must set the name of the router and then the guest account is generated on that basis.  But it's a bit stupid.  If you have configured your router from the web panel name or after you set up your guest account, it will generate a generic name of Cisco.

  Solution:

  (1) disable comments

  (2) change the name of the router (as dalime has shown)

  (3) (cancel) the stupid usb key exchange request

  (4) change the name of the router to what it should be

  (5) (cancel) the stupid usb key exchange request

  (6) turn on comments and now he will recognize the name of the OK to add router "-guest" at the end of

• Cannot change the name of the default client on windows.

  someone got on my computer and changed the name on my guest account. How can I get this out of my guest account name?

  Hi Lolomorrow,

  You can connect from an administrator account and try to change the name of the guest account.

  You can try the following steps to do the same thing.

  a.Open account by clicking on the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

  b manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click the guest account, and then select Rename.

  d. type the new name.

  e. restart the computer and check.

  For more information, you can consult the following articles.

  What is a guest account?

  Hope this information is useful.

• Find the client, domain name of the computers

  Hello
  
  Is there a way to find the customer domain name of the computers in the forms.
  
  I tried to use this, but got the domain of the user and not the field of systems.
  
  CLIENT_WIN_API_ENVIRONMENT. GET_ENVIRONMENT_STRING ('USERDOMAIN')
  
  Thanks for any help.
  Anand

  I guess that there is a registry key where you can find this information. Try searching for a forum related to windows, then use WEBUTIL to read the registry value.

• How to put all through traffic the easy vpn client VPN server

  Hi people

  I want to ask you, how to put all of the server the easy vpn client VPN traffic through.

  I mean, I have a server vpn at home, and if I connect to the vpn from outside server, to be with an IP address of my home.

  There is the configuration up to now. Where is the problem?

  ROUTER1 #sh running-config

  Building configuration...

  Current configuration: 5744 bytes

  !

  ! Last configuration change at 19:51:18 UTC Wed Sep 4 2013 by cska

  !

  version 15.1

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  ROUTER1 hostname

  !

  boot-start-marker

  usbflash0:CVO boot-BOOT Setup. CFG

  boot-end-marker

  !

  !

  !

  AAA new-model

  !

  !

  AAA authentication login ciscocp_vpn_xauth_ml_1 local

  AAA authorization ciscocp_vpn_group_ml_1 LAN

  !

  !

  !

  !

  !

  AAA - the id of the joint session

  !

  Service-module wlan-ap 0 autonomous bootimage

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-1604488384

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 1604488384

  revocation checking no

  !

  !

  TP-self-signed-1604488384 crypto pki certificate chain

  certificate self-signed 01

  3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 04050030 A0030201

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 31363034 34383833 6174652D 3834301E 170 3133 30383239 31313539

  32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36303434 65642D

  38383338 3430819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100CD 57 F1436ED2 8D9E8B99 B6A76D45 FE56716D D99765A9 1722937C F5603F9F

  528E27AF 87A24C3D 276FBA1C A5E7C580 CE99748E 39458C 74 862C 2870 16E29F75

  7A7930E1 15FA5644 D7ECF257 BF46C470 A3A17AEB 7AB56194 68BFB803 144B7B10

  D3722BDD D1FD5E99 8068B77D A1703059 9F0578C7 F7473811 0421490D 627F25C5

  4 HAS 250203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355

  551 2304 18301680 141B 1326 C111DF7F 9F4ED888 EFE2999A 4C50CDD8 06 12301

  03551D0E 04160414 1B1326C1 11DF7F9F 4ED888EF E2999A4C 50CDD812 300 D 0609

  2A 864886 04050003 81810096 BD0C2B16 799DB6EE E2C9B7C4 72FEAAAE F70D0101

  FF87465C FB7C5248 CFA08E68 522EA08A 4B18BF15 488D D53D9A43 CB400B54 8006

  CB21BDFB AA27DA9C C79310B6 BC594A7E D6EDF81D 0DB7D2C1 9EF7251B 19A 75403

  211B1E6B 840FE226 48656E9F 67DB4A93 CE75045B A986F0AD 691EE188 7FB86D3F

  E43934FA 3D62EC90 8F37590B 618B0C

  quit smoking

  IP source-route

  !

  !

  !

  !

  CISCO dhcp IP pool

  import all

  network 192.168.1.0 255.255.255.0

  DNS-server 195.34.133.21 212.186.211.21

  default router 192.168.1.1

  !

  !

  IP cef

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  license udi pid CISCO892W-AGN-E-K9 sn FCZ1530C209

  !

  !

  username privilege 15 secret 5 cska $1$ $8j6G 2sMHqIxJX8MQU6vpr75gp1

  !

  !

  !

  !

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  Configuration group customer isakmp crypto VPNGR

  vpngroup key

  DNS 212.186.211.21 195.34.133.21

  WINS 8.8.8.8

  domain chello.at

  pool SDM_POOL_1

  ACL 120

  netmask 255.255.255.0

  ISAKMP crypto ciscocp-ike-profile-1 profile

  match of group identity VPNGR

  client authentication list ciscocp_vpn_xauth_ml_1

  ISAKMP authorization list ciscocp_vpn_group_ml_1

  client configuration address respond

  virtual-model 1

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  !

  Profile of crypto ipsec CiscoCP_Profile1

  security association idle time 86400 value

  game of transformation-ESP-3DES-SHA

  set of isakmp - profile ciscocp-ike-profile-1

  !

  !

  Bridge IRB

  !

  !

  !

  !

  interface Loopback0

  192.168.4.1 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  interface BRI0

  no ip address

  encapsulation hdlc

  Shutdown

  Multidrop ISDN endpoint

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  !

  interface FastEthernet5

  !

  FastEthernet6 interface

  !

  interface FastEthernet7

  !

  interface FastEthernet8

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  type of interface virtual-Template1 tunnel

  IP unnumbered Loopback0

  ipv4 ipsec tunnel mode

  Tunnel CiscoCP_Profile1 ipsec protection profile

  !

  interface GigabitEthernet0

  Description Internet

  0023.5a03.b6a5 Mac address

  customer_id GigabitEthernet0 dhcp IP address

  NAT outside IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  !

  wlan-ap0 interface

  description of the Service interface module to manage the embedded AP

  192.168.9.2 IP address 255.255.255.0

  ARP timeout 0

  !

  interface GigabitEthernet0 Wlan

  Description interface connecting to the AP the switch embedded internal

  !

  interface Vlan1

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP 192.168.1.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  local IP SDM_POOL_1 192.168.4.3 pool 192.168.4.245

  IP forward-Protocol ND

  !

  !

  IP http server

  local IP http authentication

  IP http secure server

  overload of IP nat inside source list 110 interface GigabitEthernet0

  IP nat inside source static tcp 192.168.1.5 3389 interface GigabitEthernet0 3389

  IP nat inside source static udp 192.168.1.5 3389 interface GigabitEthernet0 3389

  IP nat inside source static tcp 192.168.1.5 21 interface GigabitEthernet0 21

  IP nat inside source static udp 192.168.1.5 21 interface GigabitEthernet0 21

  IP nat inside source static tcp 192.168.1.4 3389 interface GigabitEthernet0 3390

  IP nat inside source static udp 192.168.1.4 3389 interface GigabitEthernet0 3390

  overload of IP nat inside source list 120 interface GigabitEthernet0

  IP route 0.0.0.0 0.0.0.0 dhcp

  !

  exploitation forest esm config

  access list 101 ip allow a whole

  access-list 110 permit ip 192.168.1.0 0.0.0.255 any

  access list 111 permit tcp any any eq 3389

  access-list 120 allow ip 192.168.4.0 0.0.0.255 any

  !

  !

  !

  !

  !

  !

  !

  control plan

  !

  Bridge Protocol ieee 1

  1 channel ip bridge

  !

  Line con 0

  line 2

  no activation-character

  No exec

  preferred no transport

  transport of entry all

  transport output pad rlogin udptn ssh telnet

  line to 0

  line vty 0 4

  privilege level 15

  preferred transport ssh

  entry ssh transport

  transportation out all

  !

  Thanks in advance

  To do this you must make the following changes:

  (1) disable split Tunneling by deleting the ACL of your configuration of the client group.
  (2) enable NAT for VPN traffic by adding 'ip nat inside' to your virtual model of the client network to the ACL that controls your PAT.

  Edit: Theses are the changes to your config (also with a little cleaning):

  Configuration group customer isakmp crypto VPNGR

  No 120 LCD

  !

  type of interface virtual-Template1 tunnel

  IP nat inside

  !

  no nat ip inside the source list 120 interface GigabitEthernet0 overload

  !

  access-list 110 permit ip 192.168.4.0 0.0.0.255 any

  no access-list 120 allow ip 192.168.4.0 0.0.0.255 any

  Sent by Cisco Support technique iPad App