HP T1300: White Pages of printing HP T1300

Similar Questions

• white pages to printer

  Hello.  My HP Photosmart D7500 product #Q8440A only prints blank pages.  The cartridges are full, and I have Windows XP. I recently installed new ink cartridges.  First part of the page prints, but now nothing prints. I tried to align the cartridges, but got the error message "failure".  I also tried cleaning the print heads.  Looks like it's printing and the paper goes through fine, but no print on this subject appears.  Any help would be appreciated. Thank you!

  Hello great pleasure, here is a link that may have useful information about the problem you are having.

• the white pages when printing for laserjet pro 200 color MFP M276nw

  When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

  You are unable to print the 'print quality Page' of the façade or do not know how?

• HP Photosmart C4680: my Photosmart C4680 is printing only the white pages

  Hello

  Whenever I try to print something it prints just a blank page.

  The paper through the flow and I heard sounds of printing.

  I tried to clean the ink cartridges, it did not help.

  Please can someone help me with this.

  Thank you in advance,

  Jamie

  I hope that you are well @jamiebally, welcome to the community of HP
  
  I noticed your post on your Photosmart C4680 print white pages and I wanted to stop to share my suggestions to help out you.
  
  Check out this link to fix the problem. If the problem persists, contact HP to see on your replacement options.
  
  The problems of quality of printing to the HP Photosmart C4600-C4700 all-in-one printer series
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!
  
  Have a wonderful day!
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• I have that white pages, the document is not printed

  I chanched my color ink and now I get only white pages, nothing.

  What can I do?

  Thanks for riplay

  Barbara

  I stop the printer and system (do not reset!), yesterday.
  Today, I started the PC, then later the printer and PRINT!

  Thanks for your help
  pfudi

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• DeskJet F4280: White stripes (no printing) - F4280

  Horizontal white stripes (no printing) - seem to be in the same location on the page when they occur.  'Only' occur when printing from a Microsoft Works word document or spreadsheet, or copy a page perfectly printed.  Test the printer Windows page ok being IRS forms and instructions were published recently.

  @PapaPhil,

  Welcome to the HP community! I wanted to stop to my suggestions to help with your problems. If I understand the questions, print outs of Microsoft Works and when making the copies of your Deskjet F4280 all come out with horizontal white bands on them...

  As copies are a feature that doesn't involve all the computer, it is a sign of a hardware problem. You can try a power reset (see below) and to ensure that the printer is connected directly to a wall outlet, avoiding the power and surge arresters bars.

  Try to make a copy again from the front of the printer and if the horizontal bands to continue, you will need a new unit and I would say to contact HP to see on your next printer options.

  If you find that copies work fine, please let me know and we can move on to troubleshooting software because it will show us that the printer itself is OK!

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Good luck!

• Print last page blank, how to avoid the last page to print, using NiReport

  Hi all

  I use NIReport to generate report/Print.

  I have problem

  I have a page to print,

  I wrote until the last line

  Problem is that NEITHER report adds a new, blank page, which is not necessary.

  This problem n, t occur when we write in the last row or left white.

  Note: I also have a header and footer details

  It will be printed on the blank page.

  When NIReport understand specific text is last line of the page, then NIReport automatically add the new page in the template.

  How to avoid printing the last white page in NIReport?

  Thank you

  Mukesh Kumar

  Just a guess: you use AppendLine? If so, you can try to move on AppendText to write the line, adding of newline as the first call when you need to start a new line. AppendLine adds a new line to the report after printing the line, and this can generate a blank page if you write to the last line on the page.

• On HP C309a printer wireless test page is printing ok

  On HP C309a printer wireless test page is printing ok, all the other tried printing out a blank page, I have updated files all the drivers and software for this printer - no success

  No problem ink, more with 2 computers on my network printing is very good

  So far, no error found runs the network check...

  Please, any advice

  Thank you

  Hello

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Question printer prints white sheets of paper
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&LC=en&DLC=en&product=3737195&tmp_track_link=ot_search#N47

• Color Laserjet 2840: White Pages only

  Hello!

  2840 ceased print after changing the black cartridge. He just printed white clean pages. Copy or printing did the same. Scan worked, the machine responded and moved and it was available in the internal network. But he appeard as the UN 2830 type. I checked the web, read on the card reader cable looselyness, opened the machine and fixed it firmly. Over time, he returned to 2840 to the different machines. Perhaps, he moved with all the reportoire. But do not print.

  First of all I thought to a problem with the drivers. Tried to start/stop, restart until the firmware to factory status. Nothing has changed. Downloaded updates, I found on the web and installed (USB). Same thing.

  The second I suspectec on the cartridge, the black one (the only one I've been using and replacing for the past two years). The date in the box was 2014, but I guess it is the date of manufacture as the last one, I used said 2012 and worked until last week. I ordered another news that came yesterday morning, but nothing has changed. (He went to $ 100).

  On the way, I consulted technicians the on the phone who told me to think about the drivers. Which I had already checked. End of this road.

  So, third, I read for one, and I found the problem associated with only yellow/white pages and dirty sticky solenoid. I had a couple of coffees... and opened and closed the machine according to the maintenance manual. Just two screws on the left, all works with the mechanics and four hours of work. Nevertheless, almost finished... the cartridges could not be loaded as carousel slots went to place. (This has happened since the fourth grade, from 2007, but simply by pressing the button, finally, they went to the place, or the carousel was loose enough to put them in place with a smooth finger pressure). I could get to three cartridges in place, but could not with subsequently. This time, has no looselyness in the carousel. Again, found the clip on this forum thing and put it manually. Finished,

  In the end, I'm back to the starting point: everything seems to work... but... only clean blank pages come out of the machine.

  With this information, can give me some clues to start before I guess I have a heavy left sweep and $ 200 in ink unusable?

  (I don't have a technical repair close to carry my machine and a month unless it would mean I have to buy a new one...).

  Thanks in advance. Sorry for my English.

  Hello! I DID IT! The machine is repaired. He even printed in color with empty for two years color cartridges! So I'll spend a few minutes to explain where that has happened just anyone can use. The problem was a misallingment of the caousel gears. Two of them.

  http://www.teclar.EU/teclar.EU/alinhacion_esquerda_previa.jpg
  http://www.teclar.EU/teclar.EU/alinhacion_dereita_previa.jpg

  As I couldn't find a way to continue with the laser/scaner device index, which I opened it to see what it looked like http://www.teclar.eu/teclar.eu/laser_scanner_assembly_inside.JPG

  following a hunch, I decided to try one last thing: re-align the gears of the carousel.

  Once more, I took the manual, find the chapter and followed the steps. Everything I had done before took a third of the time, but the wind, unrouting cables, and especially the top plate made last even 3-4 hours (you never know if you want to break something). But the manual is very specific and if you are methodical organized and retain or photograph what you did anyone can take this machine apart to pieces and come up again. So I didn't.

  But after you gain confidence I tried to put an end to the process earlier that I must made a mistake. When I had not yet placed the Assembly sweeping, nor any of the covers, I tried to test the machine.

  Well, what followed were error59 and error57. Furthermore, as I have tried to set up the cartridges and imaging drum, I broke the imaging drum (if the right and left covers are not in place a lever in the imaging drum does not engage and you can not put it inside the openings if you try harder, you brake a nipple on the left side of the drum plastic; Eh_bien I pasted it yesterdey and today I will test if it goes...).

  Affotunately, like Diogenes, I do not throw anything until he spent a period of five years quarantined (modern times) so I got an old Imaging drum which also let me know that I have broken in the most recent, could be put in place and proceed with the repair (even if it had been stored for more than two years He came back with a left of 5% of the work to be done...). So, what now? Back to the beginning and clunch and click all. Another two hours (now I reassembled everything, including the recent covers) tried a test engine: and worked! Even with colors contained in cartridges that did not spit out a single ink for two years! It's funny.

  The specific repair was the misallingment. As you could see in the before pictures.

  This was the position final alligment of the http://www.teclar.eu/teclar.eu/alinhacion_dereita_nova.JPG of speeds http://www.teclar.eu/teclar.eu/alinhacion_esquerda_nova.JPG

  The point is that the way to align the large black gear with the small white gears is simple to shoot blacks out of their place, enough to run the as needed. By simple application of force. (Protect your fingers or you might get a slight cut). So, I'm wondering if I should have followed the procedure recommended by YouTube that does exactly the same thing without removing anything. https://www.YouTube.com/watch?v=xKwsYipQ0Ag The train left is perhaps not so easy to get around... but... because a lot of things you can break following standard procedure... I think about it.

  One last thing. I didn't have a magnetic head screwdriver and I don't fix everyday machines so I made this http://www.teclar.eu/teclar.eu/aparafusadores.JPG which worked perfectly. Without a magnetic tip, no one can do that. Just to finish a few pictures of the parts and the machine http://www.teclar.eu/teclar.eu/solenoide.JPG http://www.teclar.eu/teclar.eu/pezas.JPG http://www.teclar.eu/teclar.eu/maquina_toda_desmontada.JPG

  And thank you very much to all those who participated in the design of this machine. It's really rewarding to see how things are going without effort and can be dismantled and reassembled easily. I work in the construction sector, where almost everything must be broken to open it. Thanks again and God luck with your DIY repairs.

• Photosmart HP 6520: Always feed 1 or 2 additional blank pages after printing

  Did that there is no additional empty pages to the documents I print, no matter what I print (e-mail, word, excel doc doc) still feeding extra blank pages 1 or 2 after printing? How can I resolve this you problem?

  Hello MrsMoo,

  Welcome to the HP Forums.

  I see that you have a problem with the white pages feeding through the printer once the completed initial print job.

  Please make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Once the printer is connected to a wall outlet, please use the button ON / OFF to make a proper feeding cycle.  This will make a Semi be able to reset the printer.  Try printing again.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• OfficeJet Pro 6968: New blank pages to printer

  Hello

  I just bought a new printer (printer all-in-one HP OfficeJet Pro 6968) followed all the instructions for installation. I use a WIFI connection. Whenever I print, only the white pages come out of the printer. I can hear the movement of the print head will but nothing is displayed. I checked the ink cartridges and everything is secure. I tried with a MAC, IPhone and a computer Windows 10 even on each of them.

  Hi Pitman,

  You get a view type excel sheet on the control panel of the printer?

  This isn't his normal no more.

  I'd get an Exchange on this one.

  Jean

• Photosmart 6525: Blank Pages when printing is complete

  After a print job is completed, the PhotoSmart 6525 continues to feed the sheet after sheet of blank paper until one of the following conditions occurs:

  1. The printer is out of paper
  2. I managed to successfully cancel the job (what happens usually after that at least 10 blank pages have been through, the printer jams unless)
  3. The paper jams (usually after 5 or 6 white pages). This is what happens to 90% of the time.

  Troubleshooting steps I have already taken:

  1. Hard reset of the printer (three times)
  2. Clean all rollers (at least twice)
  3. Reset the print Mac (twice) subsystem
  4. Reinstall the latest version of the printer software (also at least twice).

  Nothing did. Any other suggestions? Otherwise, it will be the first (out of seven) HP printers I've owned that lasted less than six years (in this case, 18 months).

  Hey @Fogbear,

  At this point, I will send you a private Message with instructions on how to perform a reset of programming full semi on your printer.

  Please check your private Messages for instructions. Once the reset is complete, please test stand-alone print to see if the problem has been resolved.

  I look forward to hear from you!

• Does not recognize a narrow black border a white border when printing without margins

  Photosmart D7460, Vista 64 bit,

  If I put a white border around a picture with a narrow black border outside a photograph and select borderless printing knows no black and white borders and prints the image within the borders to the edge of the page.

  If I want white edges around pictures and a full letter size print, I get a border that is wider at the bottom than at the top of the page.

  Can I configure it to print even a white border around the photo of the letter size?

  and

  Can I get the printer to recognize a border color around an image when printing without margins?

  I have only access to the X 2 version, here's a predetermined print schema.

  Note the Center on the page option.

  You can use the balance: option to increase or decrease the white border.

  

• HP deskjet 3510 sending 2 blank pages before printing a page

  Whenever I send a print message to my deskjet 3510 my MacBook, it place to white pages and then prints.  This does not happen when I scan and print.  I tried the icon, the Word printing file and control p.. all produce the same results.  Would appreciate help.  Have had printer exactly 1 year just started 3 months ago.

  Hi mvmagee,

  Thanks for letting me know. That's great.

  Please consider this message Message 2 of 3 marking as "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

  Thank you.